| Most common failures | No# failures |
|---|
| Rear reflector on motorcycle missing |1.4.1| | 17 |
| Headlamp aim out of alignment | 16 |
| Registration plate issues | 14 |
| Horn not working |1.7.3a| | 12 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
| Steering headbearing has excessive free play |2.2.2| | 6 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 5 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
| Rear Wheel spoke excessively loose |4.2.1b| | 5 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Stop lamp not working (4.3.1 (a) (ii)) | 4 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 4 |
| Rear reflector missing (4.8.2 (a) (ii)) | 4 |
| Fuel system component leaking |7.2.1a| | 3 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
| All direction indicators not working (4.4.1 (a) (ii)) | 3 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Headlamp insecure |1.2.3b| | 3 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Front Wheel spoke excessively loose |4.2.1b| | 3 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Horn is not a constant note |1.7.3c| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 2 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 2 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Drive chain excessively loose |6.2.1d| | 2 |
| Drive chain worn to excess |6.2.1e| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Headlamp switch faulty |1.2.4| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Horn not working (7.7 (a)) | 1 |
| Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Nearside Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Nearside Direction indicator not working |1.5.1c| | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Throttle operating incorrectly stiff and not returning |6.2.1f| | 1 |
| Nearside Front Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| Offside Front Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| Nearside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
| Roller brake test brake efficiency less than 27.5% overall (1.2.2 (a) (ii)) | 1 |
| Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Rear Brake pedal insecure retainer missing also warn (1.1.2 (e) (i)) | 1 |
| Suspension component pin or bush excessively worn swing arm mount (5.3.4 (a) (i)) | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Front Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected Split pins missing (5.2.1 (c) (ii)) | 1 |
| Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected Split pins missing (5.2.1 (c) (ii)) | 1 |
| Shock absorber likely to become detached Mounting pins held secure with nails (5.3.2 (a) (ii)) | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Steering operation restricted in free movement from lock to lock revving up on right lock |2.1.4 |c|| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Horn not working wire off horn (7.7 (a) (ii)) | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
| Front Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Offside Rear Footrest missing (6.2.12 (a)) | 1 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Offside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Centre Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Offside Outer Rear Lower Footrest missing |6.2.1a| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Rear suspension bush has excessive free play swingarm
|2.4.A2a|i|| | 1 |
| Headlamp insecure |4.1.1 |c|| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Front position lamp obscured more than 50% |1.1.1d| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Wheel spoke excessively loose |4.2.1b| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Front Wheel spoke excessively loose (5.2.2 (d)) | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Wheel spindle loose |5.2.1 |c| |i|| | 1 |
| Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Brake cable excessively corroded |3.2.A1b| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Horn sounds harsh or grating |1.7.3c| | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
| Rear Wheel fixing missing (single fixing) (5.2.1 (a) (ii)) | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Vehicle identification number not displayed (0.2 (a)) | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Front Handlebar retaining device missing bar ends missing (2.2.1 (b) (i)) | 1 |
| Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Motorcycle structure adversely modified |6.1.1b| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Nearside Headlamp switch insecure |1.2.4| | 1 |
| Rear Wheel spoke missing |4.2.1b| | 1 |
| Rear position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Front position lamp damaged and function impaired |1.1.1b| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Nearside Rear Direction indicator missing |4.4.1 |a| |ii|| | 1 |
| Central Rear Direction indicator missing |4.4.1 |a| |ii|| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Nearside Front Direction indicator missing |1.5.1a| | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Rear Inner Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
| Front Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Front position lamp damaged and function impaired |1.1.1b| | 1 |
| Rear suspension component loose swingarm pivot bolt |2.4.A.1a| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear Upper Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Rear Upper Rear suspension has a modification which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Nearside Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Offside Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Wheel spoke cracked. |4.2.1b| | 1 |
| Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |