Most common failures | No# failures |
---|
Horn not working |1.7.3a| | 16 |
Rear reflector on motorcycle missing |1.4.1| | 16 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 12 |
Headlamp aim out of alignment | 12 |
Registration plate issues | 11 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 7 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 7 |
Direction indicators not working |1.5.1c| | 7 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 6 |
Rear Rear reflector on motorcycle missing |1.4.1| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Horn not loud enough to be heard by another road user |1.7.3a| | 5 |
Stop lamp affected by the operation of another lamp |1.3.2| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 5 |
Rear Wheel spoke excessively loose |4.2.1b| | 5 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
Drive chain excessively loose |6.2.1d| | 5 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 4 |
Front Front wheel spindle securing nut locking device missing |2.3.3a| | 3 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Headlamp aim not tested |1.6| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Rear mono-shock insecure |2.4.B.4| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
Headlamp switch faulty |1.2.4| | 2 |
Steering lock stop loose |2.1.3| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Drive chain excessively tight |6.2.1d| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Nearside Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Offside Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Offside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Rear Footrest missing BOTH (6.2.12 (a)) | 1 |
Front Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Position lamp switch insecure |1.1.4b| | 1 |
Brake performance not tested |3.3| | 1 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Front Wheel spindle locking device missing (5.2.1 (d)) | 1 |
Front Wheel spindle loose (5.2.1 (c) (i)) | 1 |
Rear Footrest missing Pillion. |6.2.1a| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Rear reflector on motorcycle missing Yellow reflector incorrectly fitted |1.4.1| | 1 |
Rear suspension bush has excessive free play Swingarm pivot |2.4.A2a|i|| | 1 |
Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
Position lamp not working rear |4.2.1 |a|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Wheel spoke excessively loose rear |5.2.2 |d|| | 1 |
Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Brake pedal pivots excessively worn |3.1.3a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Rear Wheel spoke missing |4.2.1b| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Position lamp switch does not operate the front and rear position lamps |1.1.4c| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Rear Riders seat insecure |6.2.1a| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Nearside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Centre Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Centre Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Headlamp switch insecure |1.2.4| | 1 |
Nearside Indicator switch insecure |1.5.4| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front Front position lamp damaged and function impaired |1.1.1b| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Rear Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Nearside Drive chain excessively tight |6.2.1d| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Brake lever insecure |3.1.2a| | 1 |
Front Horn not working |1.7.3a| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear Brake pedal is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Brake pedal is inoperative |3.1.3c| | 1 |
Rear Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Centre Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Offside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Direction indicators flashing less than 60 times a minute all 4 |1.5.1c| | 1 |
Nearside Front Steering lock stop missing |2.1.3| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Horn replaced by a bell |1.7.3b| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |