Most common failures | No# failures |
---|
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 49 |
Headlamp aim out of alignment | 23 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 16 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 15 |
Exhaust is leaking and excessively noisey |7.1.1b| | 12 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 11 |
Steering headbearing has excessive free play |2.2.2| | 10 |
Fuel system component leaking |7.2.1a| | 7 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 7 |
Headlamp insecure |1.2.3b| | 6 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 6 |
Headlamp aim not tested |1.6| | 5 |
Registration plate lamp issues | 5 |
Stop lamp remains on when the brakes are released | 4 |
Nearside Front Direction indicator not working |1.5.1c| | 4 |
Registration plate issues | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Offside Front Direction indicator not working |1.5.1c| | 3 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 3 |
Direction indicators not working |1.5.1c| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 3 |
Horn not working |1.7.3a| | 3 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 3 |
Exhaust excessively deteriorated |7.1.1a| | 3 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Centre Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front Brake lever mounting insecure |3.1.2a| | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Direction indicator not working |1.5.1c| | 2 |
Exhaust is leaking and excessively noisey Leaking at cyclinder head |7.1.1b| | 1 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s Works wrong way round |1.2.2b|ii|| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Offside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Rear All position lamps not working |4.2.1 |a|| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Exhaust mounting does not fully support the exhaust system Lower silencer bolt missing |7.1.1.c| | 1 |
Handlebar handgrip not secure to handlebars. L/H |2.1.1c| | 1 |
Headlamp insecure Bottom of front panel loose |4.1.1 |c|| | 1 |
Handlebar grip insecure to handlebar L/H |2.2.1 |d| |ii|| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Rear position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
Front Direction indicator insecure |1.5.3b| | 1 |
Front position lamp damaged and function impaired |1.1.1b| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Front Headlamp aim not tested |1.6| | 1 |
Nearside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Front Brake master cylinder defective but brake still operating (1.1.10 (b) (i)) | 1 |
Front Handlebar deformed |2.1.1b| | 1 |
Vehicle identification number not legible |6.3.5a| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Exhaust system insecure 1 manifold bolt missing (6.1.2 (a)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Brake lever attachment screws loose |3.1.2b| | 1 |
Rear Brake lever attachment screws missing |3.1.2b| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded no reserve travel |3.2.A1h| | 1 |
Rear Brake lever insecure |3.1.2a| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Fuel system component leaking on to centre stand |6.1.3 |b| |i|| | 1 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Fuel cap ineffective (6.1.3 (b) (i)) | 1 |
Fuel system component leaking (6.1.3 (b) (i)) | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Front Brake disc contaminated (1.1.14 (b)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
All direction indicators not working Front indicators does not illuminate .Rear indicators do not flash (4.4.1 (a) (ii)) | 1 |
Headlamp not working on main beam switch inverted - likely bulb in upside down or wiring wrong (4.1.1 (a) (ii)) | 1 |
Exhaust system insecure (6.1.2 (a)) | 1 |
Handlebar deformed to the extent that steering is affected |2.2.1 |c| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Offside Rear Direction indicator incorrect colour |4.4.3 |a|| | 1 |
Motorcycle structure is so deformed it is likely to adversely affect braking or steering |6.1.1 |a| |ii|| | 1 |
Forks in such a condition that steering control is adversely affected |2.2.2 |d| |ii|| | 1 |
Rear Brake lever has abnormal movement of levers indicating excessive wear or maladjustment |1.1.15 |f|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Brake lever has insufficient reserve travel rear brake lever has lack of reserve travel |1.1.2 |a|| | 1 |
Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Front Brake component leaking fluid |3.2.B4| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Headlamp insecure |4.1.1 |c|| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Upper Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Rear Brake pivot excessively worn (1.1.15 (b)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Rear Brake lever cannot be released smoothly |3.1.3d| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Direction indicators flashing more than 120 times per minute also stop |1.5.1c| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear Brake linkage excessively corroded |3.2.A1c| | 1 |
Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Fuel cap ineffective seal split |6.1.3 |b| |i|| | 1 |
Front Brake lever insecure |1.1.2 |e| |i|| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.4 |a|| | 1 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Steering headbearing has excessive free play forward to rear movement excessive |2.2.2| | 1 |
Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Headlamp aim not tested not working (4.1.2 (b)) | 1 |
Rear Brake lever not releasing correctly and functionality of brakes affected cable semi seized? (1.1.2 (b) (ii)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Exhaust system insecure |6.1.2 |a|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Position lamp not working (4.2.1 (a)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) | 1 |
Nearside Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Front Stop lamp missing switch (4.3.1 (a) (ii)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Brake cable guide defective and affecting operation (1.1.15 (d)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Exhaust is leaking and excessively noisey down pipe loose |7.1.1b| | 1 |
Exhaust mounting does not fully support the exhaust system mounting bolts loose |7.1.1.c| | 1 |
Rear Rear shock absorber insecurely mounted modified lift mounting faulty |2.4.A.3b| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Rear Rear wheel insecure |4.2.3b| | 1 |
Rear Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |