| Most common failures | No# failures |
|---|
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 42 |
| Headlamp aim out of alignment | 21 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 19 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 15 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 13 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
| Steering headbearing has excessive free play |2.2.2| | 11 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 11 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Stop lamp remains on when the brake is released |1.3.1e| | 6 |
| Horn not working |1.7.3a| | 6 |
| Registration plate issues | 5 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Offside Front Direction indicator not working |1.5.1c| | 4 |
| Rear Brake lever cannot be released smoothly |3.1.3d| | 4 |
| Riders seat insecure |6.2.1a| | 4 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Nearside Rear Footrest missing |6.2.1a| | 3 |
| Offside Rear Footrest missing |6.2.1a| | 3 |
| Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 3 |
| Headlamp aim beam image kick up to the offside |1.6| | 3 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 3 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Nearside Front Direction indicator not working |1.5.1c| | 3 |
| Rear reflector on motorcycle obscured |1.4.1| | 2 |
| Steering control handlebar movement restricted by trapped cables |2.1.2c| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Front Steering headbearing has excessive free play |2.2.2| | 2 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
| Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 2 |
| Exhaust excessively deteriorated |7.1.1a| | 2 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Rear reflector on motorcycle missing |1.4.1| | 2 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Nearside Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Direction indicators not working |1.5.1c| | 2 |
| Headlamp aim not tested |1.6| | 2 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Horn not working (7.7 (a)) | 2 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Registration plate lamp issues | 1 |
| Engine mounting/bracket excessively loose (6.1.8 (a) (ii)) | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Rear wheel spindle loose |2.4.A.2b| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Nearside Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Motorcycle structure joining/attachment plate or fastening insecure battery loose (6.1.1 (b) (i)) | 1 |
| Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Riders seat insecure seat locking mech does not work (6.2.5 (a) (ii)) | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Nearside Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Nearside Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Fork yoke deformed |2.1.1b| | 1 |
| Front Front suspension assembly component excessively bent |2.3.1| | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Offside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Front Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Rear Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Rear Brake pipe inadequately supported |3.2.B2b| | 1 |
| Central Front Lower Steering headbearing has excessive wear or free play must fix straight away |2.2.2 |f| |i|| | 1 |
| Front Lower Position lamp likely to become detached |4.2.1 |c| |ii|| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Front Horn not working |7.7 |a| |ii|| | 1 |
| Rear Brake lining|s| less than 1.0 mm thick |1.1.13 |a|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
| Nearside Rear Brake lever has insufficient reserve travel Adjusted lever travel. (1.1.2 (a)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| Vehicle identification number not legible (0.2 (b)) | 1 |
| Stop lamp showing white light to the rear (4.3.3 (a) (ii)) | 1 |
| Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 1 |
| Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Offside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii)) | 1 |
| Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Offside Outer Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Headlamp switch insecure |1.2.4| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Front Upper Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Front Lower Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Brake lever insecure |3.1.2a| | 1 |
| Offside Exhaust mounting missing |7.1.1c| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Lower Exhaust mounting missing |7.1.1c| | 1 |