Most common failures | No# failures |
---|
Brakes imbalanced across an axle | 38 |
Registration plate lamp issues | 18 |
Rear brake binding | 13 |
Parking brake: efficiency below requirements |3.7.B.7| | 13 |
Front brake application uneven | 12 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 9 |
Service brake: efficiency below requirements |3.7.B.7| | 8 |
Horn not working |1.6.2a| | 8 |
Offside rear brake recording little or no effort |3.7.B.5a| | 8 |
Rear parking brake recording little or no effort | 8 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 6 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 6 |
Rear brake application uneven | 6 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Nearside Steering rack gaiter split |2.2.D.2d| | 5 |
Brake pipe excessively corroded | 5 |
Windscreen wiper does not clear the windscreen effectively | 5 |
Offside Steering rack gaiter split |2.2.D.2d| | 4 |
Nearside Stop lamp not working |1.2.1b| | 4 |
Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 4 |
Headlamp aim out of alignment | 4 |
Offside Headlamp not working on dipped beam |1.7.5a| | 4 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 3 |
front brakes release unevenly |3.7.B.4| | 3 |
Nearside Front front brake binding |3.7.B.1| | 3 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Offside Front Front wheel bearing rough when rotated |2.5.A.2| | 3 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 3 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Offside Front position lamp|s| not working |1.1.A.3b| | 3 |
Offside Headlamp not working on main beam |1.7.5a| | 3 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 3 |
Parking brake: efficiency below requirements |3.7.C.1b| | 3 |
Nearside Headlamp not working on main beam |1.7.5a| | 3 |
Offside Stop lamp not working |1.2.1b| | 3 |
Stop lamp not working |1.2.1b| | 2 |
Windscreen wiper blade insecure | 2 |
Rear Exhaust system not adequately supported |7.1.1| | 2 |
Indicator tell tale inoperative |1.4.A.2a| | 2 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Steering column top bearing excessively worn |2.1.2c| | 2 |
Brake pedal anti-slip provision missing |3.3.A.1b| | 2 |
Offside Obligatory mirror missing |8.1.1| | 2 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 2 |
Fuel cap/sealing device sealing washer missing |7.2.4c| | 2 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 2 |
Nearside front brake binding |3.7.B.1| | 2 |
Nearside Front An item not tested |Manual| | 2 |
Service brake: efficiency below requirements |3.7.C.1a| | 2 |
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both inner wing panels under bonnet |6.1.B.2| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
Nearside Headlamp insecure |1.7.3| | 1 |
Offside Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
Exhaust emits excessive dense blue smoke during acceleration |7.3.A.2c| | 1 |
Parking brake: efficiency below requirements |3.7.D.4| | 1 |
Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
rear brake recording little or no effort |3.7.B.5a| | 1 |
Brake pedal creeps down when held under pressure |3.3.B.1a| | 1 |
Position lamp switch does not illuminate the front and rear position lamps with a single operation |1.1.A.2| | 1 |
Headlamp switch faulty |1.7.1| | 1 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear brake drum contaminated by brake fluid |3.5.1h| | 1 |
Nearside Rear brake drum contaminated by brake fluid |3.5.1h| | 1 |
Nearside Brake cable has wires broken and is significantly weakened |3.5.1b| | 1 |
Rear Brake hose modified and seriously weakened |3.6.A.3| | 1 |
Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Rear Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Nearside Rear Brake cable has wires broken and is significantly weakened |3.5.1b| | 1 |
Nearside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Offside Front front brake binding |3.7.B.1| | 1 |
Offside Front Direction indicators not working |1.4.A.2c| | 1 |
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Offside Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Nearside Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Offside Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Oil leaking excessively from engine |8.4.1 |a| |i|| | 1 |
Offside Rear Braking system leaking |1.1.3 |d|| | 1 |
Nearside Rear wheel cylinder leaking |3.6.A.1| | 1 |
Offside Rear wheel cylinder leaking |3.6.A.1| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
Offside Indicator tell tale inoperative |1.4.A.2a| | 1 |
Offside Front Direction indicator not working |1.4.A.2c| | 1 |
Offside Rear Direction indicator not working |1.4.A.2c| | 1 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Nearside Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Offside Front Headlamp not in good working order |not working| |1.2.4a| | 1 |
Nearside passenger door cannot be opened from outside the vehicle |6.2.B.1c| | 1 |
Offside passenger door cannot be opened from outside the vehicle |6.2.B.1c| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded rear mounting |2.4.A.3| | 1 |
Offside Rear Suspension spring mounting prescribed area is inadequately repaired Rear mounting |2.4.A.3| | 1 |
Nearside front brake recording little or no effort |3.7.B.5a| | 1 |
Offside rear brake excessively fluctuating |3.7.B.3| | 1 |
Brake pedal spongy |3.3.B.1b| | 1 |
Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
Offside Steering rack gaiter insecure |2.2.D.2d| | 1 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill |6.1.B.2| | 1 |
Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Steering locking device missing |2.2.C.1g| | 1 |
Offside Steering locking device missing |2.2.C.1g| | 1 |
Nearside Front Brake hose twisted |3.6.B.4c| | 1 |
Nearside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis area |6.1.B.2| | 1 |
Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded floor to sill area |2.4.A.3| | 1 |
Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded floor to sill area |2.4.A.3| | 1 |
Nearside Front Brake hose bulging under pressure |3.6.B.3| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear of inner wheel arch area |2.4.A.3| | 1 |
Nearside Rear An item not tested |Manual| | 1 |
Offside Front Tie bar/rod attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
Exhaust emits visible black smoke at idle |7.3.A.2b| | 1 |
An item not tested |Manual| | 1 |
Nearside Rear Exhaust system not adequately supported |7.1.1| | 1 |
Offside Rear Brake pipe inadequately supported |3.6.B.1| | 1 |
Nearside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded torsion bar front mounting area. |2.4.A.3| | 1 |
Offside Front Suspension spring mounting prescribed area is excessively corroded Torsion bar mounting area. |2.4.A.3| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded tie bar. |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded tie bar |2.4.A.3| | 1 |
Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
rear parking |secondary| brakes imbalanced | 1 |
Nearside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Rear Leaf spring has excessive wear in an anchor pin and/or bush |2.4.B.2| | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Windscreen washer not working | 1 |
Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
Offside Front wheel cylinder has restricted free movement |3.5.1k| | 1 |
Centre Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Nearside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Brake pedal anti-slip provision worn smooth |3.3.A.1b| | 1 |
Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front Brake pipe leaking |3.6.A.1| | 1 |
Registration plate issues | 1 |
Offside Front Tie bar/rod insecure |2.4.G.1| | 1 |
Nearside Driver`s door cannot be opened from inside the vehicle |6.2.B.1b| | 1 |
Offside Front Driver`s door cannot be opened from inside the vehicle |6.2.B.1b| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Nearside Rear Service brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
Nearside Rear Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
Parking |secondary brake| on a single line braking system imbalanced across an axle Axle 1 |1.3.1 |b| |i|| | 1 |
Front Horn not working (7.7 (a) (ii)) | 1 |
Offside Front Braking system leaking |3.6.A.1| | 1 |
Offside Rear Direction indicator incorrect colour |1.4.A.2f| | 1 |
Brake hose excessively deteriorated | 1 |
Nearside Front Track rod end loose |2.2.B.1d| | 1 |
Offside Front Lower Steering pivot point has excessive play |2.2.B.1g| | 1 |
Front Access panel cannot be secured in the closed position |6.4.1| | 1 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
Nearside Front Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
Offside Front Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
Nearside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill/floor pan |6.1.B.2| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 1 |
Offside Front Service brake is causing the vehicle to swerve to the nearside |3.7.C.2| | 1 |
Nearside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Upper Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Front Upper Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 1 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Headlamp adversely affected by the operation of another lamp |1.7.5c| | 1 |
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded tie bar mounting |2.4.A.3| | 1 |
Nearside Front Tie bar/rod rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Tie bar/rod rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Front Steering system has a road wheel fouling a part of the vehicle |2.2.D.2a| | 1 |
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s outer sill,o/s/f chassis leg, front cross member |6.1.B.2| | 1 |
Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Rear Front position lamp|s| obviously incorrectly positioned |1.1.A.3a| | 1 |
Nearside Driver`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
Offside Driver`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
Indicator switch faulty |1.4.A.1| | 1 |
Offside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front suspension has excessive play in a lower wishbone bearing |2.5.B.1a| | 1 |
Nearside Front Upper Suspension arm has excessive play in a pin/bearing |2.4.G.2| | 1 |
Offside Front Upper Suspension arm has excessive play in a pin/bearing |2.4.G.2| | 1 |
Steering wheel retaining device insecure |2.1.6| | 1 |
rear brakes release unevenly |3.7.B.4| | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Brake performance not tested |3.7.A.1| | 1 |
Rear Mechanical brake component has restricted free movement | 1 |
Obligatory mirror missing |8.1.1| | 1 |
Service brake is causing the vehicle to swerve to the nearside |3.7.C.2| | 1 |
Nearside Front Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Service brake grabbing severely |3.7.C.2| | 1 |
Service brake is causing the steering wheel to severely pull one way |3.7.C.2| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 1 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Nearside Dipswitch operation does not deflect all main beam headlamps to make them dipped beams |1.7.4b| | 1 |
Dipswitch operation does not deflect all main beam headlamps to make them dipped beams |1.7.4b| | 1 |
Nearside Front Engine mounting excessively loose (6.1.8 (a) (ii)) | 1 |
Parking brake operation is causing the vehicle to swerve to the offside (1.4.1 (a) (i)) | 1 |