Most common failures | No# failures |
---|
Headlamp aim out of alignment | 15 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 3 |
Offside Rear Direction indicator not working |1.4.A.2c| | 2 |
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b)) | 2 |
Horn not working |1.6.2a| | 2 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 2 |
Registration plate lamp issues | 2 |
Brake hose has insufficient room to move | 2 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Headlamp not working on main beam |1.7.5a| | 1 |
Registration plate issues | 1 |
Rear fog lamp tell-tale not working switch does not illuminate (4.9.1 (a) (ii)) | 1 |
Central Front Electrical wiring insulation so damaged or deteriorated it is likely to cause a short-circuit coolant leak into main fuse box (4.11 (c) (ii)) | 1 |
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 1 |
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 1 |
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 1 |
Exhaust catalytic converter missing where one was fitted as standard (8.2.1.1 (a)) | 1 |
Rear fog lamp not working |1.3.2b| | 1 |
Service brake is causing the vehicle to swerve to the offside |3.7.C.2| | 1 |
Front Direction indicator not working Nearside and offside (4.4.1 (a) (ii)) | 1 |
Rear Direction indicator not working Nearside and offside (4.4.1 (a) (ii)) | 1 |
Hazard warning switch inoperative (4.4.2 (a) (ii)) | 1 |
Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Obligatory mirror missing |8.1.1| | 1 |
Nearside Obligatory mirror missing |8.1.1| | 1 |
Offside Headlamp aim so that beam "kick up" is not visible on the screen |1.8.B.1| | 1 |
Nearside Rear Lower Suspension component pin or bush excessively worn Front bush (5.3.4 (a) (i)) | 1 |
Nearside Front Upper Suspension component pin or bush excessively worn Rear bush (5.3.4 (a) (i)) | 1 |
Offside Front Upper Suspension component pin or bush excessively worn Rear bush (5.3.4 (a) (i)) | 1 |
Windscreen wiper does not clear the windscreen effectively | 1 |
Fuel hose leaking |7.2.3| | 1 |
Horn control not readily accessible to the driver |1.6.1| | 1 |
Offside Front suspension has a suspension upper ball joint securing nut loose |2.5.B.1a| | 1 |
Nearside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
Offside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
Rear brake binding | 1 |
Offside brake drum contaminated by oil |3.5.1h| | 1 |
Nearside Front Steering locking device missing |2.2.C.1g| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 1 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Brake performance not tested wheel cyl leak (1.2.1 (g)) | 1 |
Rear brake application uneven | 1 |
Rear parking brake recording little or no effort | 1 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Headlamp aim beam image kick up to the offside |1.8| | 1 |
All position lamps not working |1.1.A.3b| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Rear An item not tested |Manual| | 1 |
Offside Rear An item not tested |Manual| | 1 |
Offside Rear Fuel hose leaking |7.2.3| | 1 |
Offside Front Steering system has a road wheel fouling a part of the vehicle |2.2.D.2a| | 1 |
Front Upper Suspension arm mounting modified so the suspension is likely to fail other components ball joints (5.3.3 (c) (ii)) | 1 |
Windscreen wiper not working (3.4 (a)) | 1 |