Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 13 |
Headlamp aim out of alignment | 11 |
Nearside Stop lamp not working |1.2.1b| | 8 |
Offside Stop lamp not working |1.2.1b| | 8 |
Horn not working |1.6.2a| | 8 |
Parking brake: efficiency below requirements |3.7.B.7| | 7 |
Service brake: efficiency below requirements |3.7.B.7| | 7 |
Brakes imbalanced across an axle | 6 |
Registration plate lamp issues | 6 |
Battery insecure |1.9.1| | 5 |
Brake hose has insufficient room to move | 5 |
Rear Mechanical brake component has restricted free movement | 5 |
Rear parking brake recording little or no effort | 4 |
Rear brake application uneven | 4 |
Nearside Steering pivot point has excessive play |2.2.B.1g| | 4 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Rear brake binding | 4 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 4 |
Nearside Rear Stop lamp not working |1.2.1b| | 3 |
Rear Exhaust system not adequately supported |7.1.1| | 3 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 3 |
Offside Front front brake binding |3.7.B.1| | 3 |
Offside rear brake recording little or no effort |3.7.B.5a| | 3 |
Registration plate issues | 3 |
Offside Rear Stop lamp not working |1.2.1b| | 2 |
Nearside front brake binding |3.7.B.1| | 2 |
Offside front brake binding |3.7.B.1| | 2 |
Fuel cap/sealing device sealing washer missing |7.2.4c| | 2 |
Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
Offside Headlamp not working on main beam |1.7.5a| | 2 |
Nearside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Front front brake binding |3.7.B.1| | 2 |
Fuel system component leaking |7.2.3| | 2 |
Brake hose excessively deteriorated | 2 |
Nearside Front Braking system leaking |3.6.A.1| | 2 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Hazard warning switch faulty |1.4.B.1d| | 2 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
Nearside Front Steering pivot point has excessive play |2.2.B.1g| | 2 |
Horn not loud enough to be heard by another road user |1.6.2b| | 2 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 2 |
Offside Front Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 2 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 2 |
Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
Fuel hose leaking leaking from engine bay (6.1.3 (b) (i)) | 1 |
Brake has no servo assistance |3.3.B.2| | 1 |
Prop shaft flexible coupling so deteriorated it is likely to fail |6.1.7 |d| |ii|| | 1 |
Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded inner / outer sill |2.4.A.3| | 1 |
Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 1 |
Offside Rear Braking system leaking |3.6.A.1| | 1 |
Offside rear brake excessively fluctuating |3.7.B.3| | 1 |
Fluid leaking continuously posing a serious risk to road safety |8.4.1 |a| |ii|| | 1 |
Service brake efficiency below requirements |1.2.2 |a| |i|| | 1 |
Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Nearside Rear Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Inner Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Rear front brake binding |3.7.B.1| | 1 |
Outer Front Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Offside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Nearside Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Offside Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
Nearside Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
Centre Exhaust system not adequately supported |7.1.1| | 1 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear Brake hose bulging under pressure |3.6.B.3| | 1 |
Offside Rear Brake hose bulging under pressure |3.6.B.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded upper mount for shock absorber |2.4.A.3| | 1 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 1 |
Nearside Rear Valve stem seriously damaged cut by wheel trim |4.1.D.1e| | 1 |
Offside Rear Valve stem seriously damaged cut by wheel trim |4.1.D.1e| | 1 |
Offside Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
Nearside Front Steering arm has relative movement at its fixings |2.2.B.1h| | 1 |
Offside Rear Brake pipe leaking |3.6.A.1| | 1 |
Offside Rear coil spring cracked |2.4.C.1a| | 1 |
Offside Inner Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Front Upper Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Upper Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
Nearside Front Brake hose leaking |3.6.A.1| | 1 |
Offside Front Steering system lock to lock check twists a brake hose |2.2.D.2b| | 1 |
Front Steering system has a road wheel fouling a part of the vehicle |2.2.D.2a| | 1 |
Nearside Steering box has relative movement between sector shaft and the drop arm |2.2.B.1b| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Service brake: efficiency below requirements |3.7.C.1a| | 1 |
Centre Stop lamp not working |1.2.1b| | 1 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 1 |
Nearside Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Offside Outer Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Hazard warning lamps inoperative |1.4.B.1b| | 1 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 1 |
Fuel cap/sealing device sealing washer deteriorated |7.2.4c| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 1 |
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Rear Lower Torque/reaction arm attachment bracket/mounting insecure |2.4.G.1| | 1 |
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front brake disc excessively pitted |3.5.1h| | 1 |
Offside Front brake disc excessively pitted |3.5.1h| | 1 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Subframe mounting prescribed area is fractured |2.4.A.3| | 1 |
Offside Rear Subframe mounting prescribed area is fractured |2.4.A.3| | 1 |
Offside Rear brake disc excessively pitted |3.5.1h| | 1 |
Nearside Rear Tie bar/rod rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Nearside Rear Parking brake lever has no reserve travel |3.1.6b| | 1 |
Brake pedal spongy |3.3.B.1b| | 1 |
Steering box has relative movement between sector shaft and the drop arm |2.2.B.1b| | 1 |
Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Steering system has excessive free play detected at the steering wheel |steering box fitted| |2.2.A.1a| | 1 |
Offside Rear Direction indicators not working |1.4.A.2c| | 1 |
Offside Front Upper Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Brake pipe excessively corroded | 1 |
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both inner lower arches sill area |6.1.B.2| | 1 |
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both outer sills |6.1.B.2| | 1 |
Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both inner arches front and rear |6.1.B.2| | 1 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
Vehicle structure excessively corroded within 30cm of towbar mounting front and rear of tow bar mounting area |6.6.6| | 1 |
Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Front Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Exhaust system not adequately supported |7.1.1| | 1 |
Offside Front Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Nearside Front Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Direction indicators not working |1.4.A.2c| | 1 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Dipswitch operation does not extinguish all main beam headlamps leaving at least one pair of dipped beam headlamps |1.7.4b| | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Stop lamp not working |1.2.1b| | 1 |
Nearside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |