Most common failures | No# failures |
---|
Headlamp aim out of alignment | 13 |
Windscreen wiper does not clear the windscreen effectively | 9 |
Rear parking brake recording little or no effort | 4 |
Brake hose excessively deteriorated | 4 |
Registration plate lamp issues | 4 |
Brakes imbalanced across an axle | 4 |
Horn not working |1.6.2a| | 3 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 3 |
Rear brake application uneven | 3 |
rear brakes release unevenly |3.7.B.4| | 3 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Headlamp not working on dipped beam |1.7.5a| | 3 |
Offside Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 2 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Rear Wheel nut|s| loose |4.2.A.1e| | 2 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 2 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside Headlamp not working on main beam |1.7.5a| | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Offside Front Upper Ball joint has excessive play |2.2.B.1f| | 2 |
Front brake disc in such a condition that it is seriously weakened | 2 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 1 |
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 1 |
Offside Rear Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner arch (7.1.1 (a) (i)) | 1 |
Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
Trailer electrical socket damaged so that lead cannot be securely connected |1.9.3b| | 1 |
Nearside Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 1 |
Nearside Rear coil spring incomplete |2.4.C.1a| | 1 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Nearside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel |6.1.B.2| | 1 |
Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel |6.1.B.2| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 1 |
Nearside Rear Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
Offside Front Brake actuating linkage mounting prescribed area is excessively corroded chassis |1.1.21 |e| |i|| | 1 |
Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Braking system leaking |3.6.A.1| | 1 |
Offside Front All position lamps not working |1.1.A.3b| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Position lamp not working |4.2.1 |a|| | 1 |
Exhaust has a major leak of exhaust gases Manifold |6.1.2 |a|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Offside Upper Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 1 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside Front Power steering pipe|s| or hose|s| leaking from a seal |2.3.3b| | 1 |
Offside Front Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b| | 1 |
Offside Rear fog lamp missing |1.3.2a| | 1 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 1 |
Offside Front Headlamp not working on main beam |1.7.5a| | 1 |
Offside Rear coil spring broken |2.4.C.1a| | 1 |
Nearside Front Upper Suspension arm pin or bush excessively worn rear bush on top wishbone, marked in yellow chalk. (5.3.4 (a) (i)) | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Windscreen wiper blade deteriorated |8.2.2| | 1 |
Nearside Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Offside Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Offside Headlamp not working on main beam |1.7.5a| | 1 |
Main beam `tell-tale` not working |1.7.4c| | 1 |
Headlamp switch faulty |1.7.1| | 1 |
Nearside Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Offside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Seat belt attachment fitting badly deteriorated |5.2.3| | 1 |
Offside Front Seat belt attachment fitting badly deteriorated |5.2.3| | 1 |
Centre Front Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
Centre Front Steering pivot point has excessive play |2.2.B.1g| | 1 |
Nearside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Nearside Front Headlamp aim beam image kick up to the offside |1.6.B1| | 1 |
Offside Front Headlamp aim beam image kick up to the offside |1.6.B1| | 1 |
Offside Front Direction indicator not working |1.4.A.2c| | 1 |
Registration plate issues | 1 |
Offside Front Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 1 |
Nearside Front Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 1 |
Offside Front Lower Ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Centre Front Track rod end ball pin shank loose |2.2.B.1c| | 1 |
Nearside front brake recording little or no effort |3.7.B.5a| | 1 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Front Body has a projection caused by corrosion |6.1.C.1| | 1 |
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Rear passenger door cannot be opened from outside the vehicle |6.2.B.1c| | 1 |
Offside Front Upper Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Steering arm has relative movement at its fixings |2.2.B.1h| | 1 |
Nearside Inner Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Inner Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
Rear Mechanical brake component has restricted free movement | 1 |
Nearside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Offside Front Shock absorbers insecurely attached (5.3.2 (a) (i)) | 1 |
Offside Rear Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Nearside Rear Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i)) | 1 |
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill x2 (6.2.2 (d) (i)) | 1 |
Nearside Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
Offside Front Brake hose excessively damaged (1.1.12 (b) (ii)) | 1 |
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Offside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Offside Rear Parking brake inoperative on one side (1.4.1 (a)) | 1 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Rear brake binding | 1 |
Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Nearside Front Steering component mounting prescribed area is excessively corroded crossmember 2 patches |2.2.C.1h| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill not fully seam welded |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Offside Front Body has a sharp edge caused by corrosion step at whhel arch |6.1.C.1| | 1 |
Nearside Suspension component mounting prescribed area is excessively corroded outer sill 2 patches |2.4.A.3| | 1 |
Offside Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 1 |
Offside Rear Service brake excessively binding |1.2.1 |f|| | 1 |
Nearside Side repeater not working |1.4.A.2c| | 1 |
Offside Side repeater not working |1.4.A.2c| | 1 |
Steering box has a significant oil leak |2.2.D.2e| | 1 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Nearside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Offside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Battery insecure |1.9.1| | 1 |
Centre Statutory seat belt missing |5.1.1| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |