Most common failures | No# failures |
---|
Headlamp aim out of alignment | 28 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 18 |
Registration plate lamp issues | 16 |
Brakes imbalanced across an axle | 12 |
Windscreen wiper does not clear the windscreen effectively | 10 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 9 |
Registration plate issues | 9 |
Nearside Stop lamp not working |1.2.1b| | 7 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
Parking brake: efficiency below requirements |3.7.B.7| | 7 |
Rear brake binding | 6 |
Service brake: efficiency below requirements |3.7.B.7| | 6 |
Offside Stop lamp not working |1.2.1b| | 5 |
Brake hose excessively deteriorated | 5 |
Horn not working |1.6.2a| | 5 |
Nearside Rear wheel bearing rough when rotated |2.6.1| | 5 |
Offside rear brake recording little or no effort |3.7.B.5a| | 4 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 4 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 4 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 4 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 4 |
Rear parking brake recording little or no effort | 4 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 3 |
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 3 |
Front brake application uneven | 3 |
Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 3 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 3 |
Offside Rear wheel bearing rough when rotated |2.6.1| | 3 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Windscreen wiper blade deteriorated |8.2.2| | 3 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Brake pipe excessively corroded | 2 |
Nearside Front coil spring incomplete |2.4.C.1a| | 2 |
Nearside Front Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 2 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 2 |
Battery insecure |1.9.1| | 2 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside front brake binding |3.7.B.1| | 2 |
Brake hose has insufficient room to move | 2 |
Brake performance not tested |3.7.A.1| | 2 |
Emissions not tested |7.0| | 2 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 2 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
Centre Steering rack gaiter split |2.2.D.2d| | 2 |
Offside Front brake disc excessively pitted |3.5.1h| | 2 |
Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Rear Stop lamp not working |1.2.1b| | 2 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Brake pedal has insufficient reserve movement |3.3.A.5| | 2 |
Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Nearside Inner Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Coil spring not correctly located |2.4.C.2| | 1 |
Offside Front Coil spring not correctly located |2.4.C.2| | 1 |
Offside Front coil spring incomplete |2.4.C.1a| | 1 |
Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Steering column top bearing excessively worn |2.2.2 |b|| | 1 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
Offside Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
Nearside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front coil spring fractured |2.4.C.1a| | 1 |
Nearside Front brake disc excessively scored |3.5.1h| | 1 |
Offside Front front brake binding |3.7.B.1| | 1 |
Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Centre Exhaust system not adequately supported |7.1.1| | 1 |
Nearside Front Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Brake hose damaged | 1 |
Fuel system component leaking |7.2.3| | 1 |
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced door step |7.1.1 |a| |i|| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Central Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength panel |5.3.6 |a| |i|| | 1 |
Front Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 1 |
Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Shock absorber has an excessively worn shock absorber pivot |2.7.4| | 1 |
Nearside Front Body has a sharp edge caused by damage bumper cap missing |6.1.C.1| | 1 |
Offside Front Body has a sharp edge caused by damage bumper cap missing |6.1.C.1| | 1 |
Nearside Rear Body has a sharp edge caused by damage bumper cap missing |6.1.C.1| | 1 |
Offside Rear Body has a sharp edge caused by damage bumper cap missing |6.1.C.1| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded jacking point |2.4.A.3| | 1 |
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Offside Front Shock absorber insecure |2.7.2b| | 1 |
Offside Rear brake caliper has restricted free movement |3.5.1k| | 1 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Nearside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Upper Front drive shaft coupling flexible rubber or fabric coupling insecure |2.5.C.1e| | 1 |
Offside Rear Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
Nearside Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Front Fuel hose leaking |6.1.3 |b| |i|| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Fuel system component insecure |7.2.1| | 1 |
Rear Fuel hose insecure |7.2.1| | 1 |
Brake pedal spongy |3.3.B.1b| | 1 |
Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Front Statutory seat belt missing |5.1.1| | 1 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Fuel hose leaking |7.2.3| | 1 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Indicator switch faulty |1.4.A.1| | 1 |
Nearside Front Wheel bolt|s| missing |4.2.A.1e| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Offside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Rear Suspension has inadequate clearance with the bump stop |2.4.A.1a| | 1 |
Nearside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Nearside Headlamp not in a clean condition affecting beam image |1.2.4a| | 1 |
Offside Headlamp aim headlamp not in good working order adversely affecting beam image |1.2.4b| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Brake master cylinder insecurely mounted |3.6.G.1a| | 1 |
Nearside Front Headlamp aim beam image too far to the left |1.6.B4| | 1 |
Offside Outer Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
Offside Steering arm repaired by welding |2.2.C.1e| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Rear Brake clevis joint has restricted free movement |3.5.1k| | 1 |
Nearside Rear Brake pivot has restricted free movement |3.5.1k| | 1 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Outer Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Headlamp not in good working order |not working| |1.2.4a| | 1 |
Offside Front Headlamp aim not tested |1.8.A.1c| | 1 |
Rear Exhaust has a major leak of exhaust gases joint |7.1.2| | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Rear Fuel pipe leaking |7.2.3| | 1 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Rear Rear wheel bearing rough when rotated |2.6.1| | 1 |
Nearside Front Macpherson strut has excessive movement in the upper support bearing assembly |2.5.B.1b| | 1 |
Offside Front Macpherson strut has excessive movement in the upper support bearing assembly |2.5.B.1b| | 1 |
Nearside Rear An item not tested |Manual| | 1 |
Windscreen washer not working | 1 |
Stop lamp|s| all not working |4.3.1 |a| |iii|| | 1 |
Brake master cylinder/servo mounting prescribed area is excessively corroded battery tray |1.1.21 |e| |i|| | 1 |
Offside Rear Shock absorbers likely to become detached lower retaining bolt insecure |5.3.2 |a| |ii|| | 1 |
Nearside Front Shock absorbers insecurely attached coil over locking nuts |5.3.2 |a| |i|| | 1 |
Offside Front Shock absorbers insecurely attached coil over locking nuts |5.3.2 |a| |i|| | 1 |
Nearside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
Nearside Rear Body has a projection caused by damage |6.1.C.1| | 1 |
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Front Suspension component mounting prescribed area is severely distorted |2.4.A.3| | 1 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Horn sounds harsh or grating |1.6.2e| | 1 |
Front passenger seat insecure |6.2.3| | 1 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 1 |
Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Front Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Exhaust system not adequately supported |7.1.1| | 1 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Direction indicators not working |1.4.A.2c| | 1 |
Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Rear Fuel system component insecure |7.2.1| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 1 |
Offside Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 1 |
Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Body has a sharp edge caused by corrosion offside rear wing |6.1.C.1| | 1 |
Nearside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear brake application uneven | 1 |
Offside Front position lamp|s| insecure |1.1.A.3a| | 1 |
Offside Headlamp not working on main beam |1.7.5a| | 1 |
Fuel cap/sealing device sealing washer deteriorated |7.2.4c| | 1 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Stop lamp remains on when the brakes are released | 1 |