| Most common failures | No# failures |
|---|
| Windscreen wiper does not clear the windscreen effectively | 17 |
| Headlamp aim out of alignment | 11 |
| Registration plate lamp issues | 9 |
| Brake pipe excessively corroded | 8 |
| Brake hose excessively deteriorated | 6 |
| Brakes imbalanced across an axle | 6 |
| Parking brake: efficiency below requirements |3.7.B.7| | 5 |
| Horn not working |1.6.2a| | 4 |
| Offside Headlamp aim beam image kick up to the offside |1.8| | 3 |
| Nearside Front Brake hose bulging under pressure |3.6.B.3| | 3 |
| Offside Front Brake hose bulging under pressure |3.6.B.3| | 3 |
| Offside Rear fog lamp not working |1.3.2b| | 3 |
| Brake load sensing valve seized |3.6.E.3| | 3 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Nearside front brake binding |3.7.B.1| | 2 |
| Rear parking brake recording little or no effort | 2 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
| Horn not loud enough to be heard by another road user |1.6.2b| | 2 |
| Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 2 |
| Service brake: efficiency below requirements |3.7.B.7| | 2 |
| Fuel system component leaking |7.2.3| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Front Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 2 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
| Nearside Front Lower Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Rear brake binding | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Battery insecure |1.9.1| | 2 |
| Offside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 2 |
| Offside Rear position lamp|s| not working |1.1.A.3b| | 2 |
| Nearside Rear coil spring broken |2.4.C.1a| | 2 |
| Front brake application uneven | 2 |
| Offside Stop lamp not working |1.2.1b| | 2 |
| Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Windscreen washer not working | 2 |
| Offside Rear Service brake excessively binding (1.2.1 (f)) | 2 |
| Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 2 |
| Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 2 |
| Passenger`s seat insecure |6.2.A.1| | 1 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Headlamp not working on main beam |1.7.5a| | 1 |
| Nearside Side repeater not working |1.4.A.2c| | 1 |
| Offside Side repeater not working |1.4.A.2c| | 1 |
| Offside Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
| Offside Seat belt retracting mechanism defective |5.2.5b| | 1 |
| Horn sounds harsh or grating |1.6.2e| | 1 |
| Offside Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
| Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Nearside Front Front position lamp|s| insecure |1.1.A.3a| | 1 |
| Front passenger seat insecure |6.2.3| | 1 |
| Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Nearside Headlamp aim beam image kick up to the offside |1.8| | 1 |
| Nearside Front Braking system leaking |3.6.A.1| | 1 |
| Offside Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Rear Coil spring fractured or broken |5.3.1 |b| |i|| | 1 |
| Offside Rear Service brake excessively binding |1.2.1 |f|| | 1 |
| Main beam `tell-tale` not working |1.7.4c| | 1 |
| Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
| Nearside Front suspension ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Obligatory mirror insecure |8.1.1| | 1 |
| Brake pedal has no servo assistance |3.3.B.2| | 1 |
| Offside Rear Body has a projection caused by corrosion |6.1.C.1| | 1 |
| Offside Front Body has a projection caused by damage |6.1.C.1| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Fuel system component insecure |7.2.1| | 1 |
| Steering column top mounting bracket insecure |2.1.2d| | 1 |
| Nearside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Rear Mechanical brake component has restricted free movement | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Centre Rear Brake load sensing valve linkage seized |3.6.E.3| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Centre Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Outer Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Registration plate issues | 1 |
| Main beam tell-tale not working |4.9.1 |a| |ii|| | 1 |
| Central Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Rear Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Rear fog lamp not working |1.3.2b| | 1 |
| rear parking |secondary| brakes imbalanced | 1 |
| Rear brake application uneven | 1 |
| Nearside Rear Brake performance not tested |3.7.A.1| | 1 |
| Offside Rear coil spring broken |2.4.C.1a| | 1 |
| Service brake: efficiency below requirements |3.7.C.1a| | 1 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
| Nearside Front Seat belt insecurely fixed to the seat |5.2.1a| | 1 |
| Offside Brake rod has restricted free movement |3.5.1k| | 1 |
| Offside Rear Direction indicator lens defective such that the emitted light is adversely affected |4.4.1 |b| |ii|| | 1 |
| Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Nearside Rear Upper Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Nearside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
| Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Nearside Rear Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Rear fog lamp missing |1.3.2a| | 1 |
| Rear Brake load sensing valve linkage seized |3.6.E.3| | 1 |
| Rear Exhaust has a major leak of exhaust gases tail pipe |6.1.2 |a|| | 1 |
| Emissions not tested |8.2.2.2 |e|| | 1 |
| Nearside Front Outline marker lamp not working |4.2.1 |a|| | 1 |
| Offside Rear Outline marker lamp not working |4.2.1 |a|| | 1 |
| Power steering malfunctioning |2.3.3a| | 1 |
| Power steering component|s| leaking |2.3.3b| | 1 |
| Offside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Emissions not tested |7.0| | 1 |
| Nearside Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
| Nearside Front Brake hose leaking |3.6.A.1| | 1 |
| Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Battery insecure both |1.9.1| | 1 |
| Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement both d bushes |2.4.G.2| | 1 |
| Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Offside Rear Braking system leaking |3.6.A.1| | 1 |
| Brake fluid warning lamp illuminated |3.6.G.2| | 1 |
| Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Front Seat belt retracting mechanism defective |5.2.5b| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear coil spring incomplete |2.4.C.1a| | 1 |
| Offside Front Ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting above wheel (6.2.2 (d) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill end, behind wheel (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension arm ball joint excessively worn bottom ball joint (5.3.4 (a) (i)) | 1 |
| Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Offside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wing (5.3.6 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember (6.1.1 (c) (i)) | 1 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength support beam corroded behind wheel within 30cm of nearside front shock absorber (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength support beam corroded behind wheel on inside within 30cm of nearside front shock absorber (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Shock absorbers has an excessively worn bush (5.3.2 (c)) | 1 |
| Front Oil leaking excessively from engine (8.4.1 (a) (i)) | 1 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i)) | 1 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced and offside inner wing s and side box sections (6.1.1 (c) (i)) | 1 |
| Front Exhaust has a major leak of exhaust gases DOWNPIPE TO MANIFOLD, (6.1.2 (a)) | 1 |
| Offside Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength and offside rear syspension arms mts inner sills (5.3.6 (a) (i)) | 1 |
| Bonnet primary retaining device ineffective (3.1 (c)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear cross member across all rear holed (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Osr main chassis leg (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch by rear axle mount (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel upper (6.1.1 (c) (i)) | 1 |
| Windscreen wiper not working Both (3.4 (a)) | 1 |
| Nearside Rear Upper Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Front Upper Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |