Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 14 |
Brake hose excessively deteriorated | 12 |
Headlamp aim out of alignment | 9 |
Brake pipe excessively corroded | 9 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 9 |
Registration plate lamp issues | 6 |
Parking brake: efficiency below requirements |3.7.B.7| | 5 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 5 |
Offside front brake binding |3.7.B.1| | 5 |
Brakes imbalanced across an axle | 4 |
Rear parking brake recording little or no effort | 4 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Service brake: efficiency below requirements |3.7.B.7| | 3 |
Nearside front brake binding |3.7.B.1| | 3 |
Rear brake binding | 3 |
Registration plate issues | 3 |
Windscreen wiper blade insecure | 3 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 2 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 2 |
Offside Rear fog lamp not working |1.3.2b| | 2 |
Nearside Front Brake hose bulging under pressure |3.6.B.3| | 2 |
Nearside Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Front Steering arm has relative movement at its fixings |2.2.B.1h| | 1 |
Nearside Front Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
Nearside Headlamp aim beam image obviously incorrect head lamp unit broken |1.8.A.1b| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Front Inner Ball joint has excessive play axial rod |2.2.B.1f| | 1 |
Nearside Cab steps in such a condition that it is likely to cause injury |6.2.8 |b|| | 1 |
Offside Cab steps in such a condition that it is likely to cause injury |6.2.8 |b|| | 1 |
Offside Rear Suspension arm corroded and seriously weakened |5.3.3 |b| |i|| | 1 |
Offside Rear Suspension arm modified so the suspension is likely to fail other components |5.3.3 |c| |ii|| | 1 |
Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill by lower arm |5.3.6 |a| |ii|| | 1 |
Nearside Rear Floor in such a condition it is likely to cause load insecurity or instability |6.2.4 |a| |ii|| | 1 |
Offside Rear Floor in such a condition it is likely to cause load insecurity or instability |6.2.4 |a| |ii|| | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing |5.3.6 |a| |i|| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Vehicle Identification Number not legible |6.3.5.a| | 1 |
Brake performance not tested |3.7.A.1| | 1 |
Hazard warning switch faulty |1.4.B.1d| | 1 |
Nearside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
Offside Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Offside Rear fog lamp insecure |1.3.2a| | 1 |
Indicator tell tale inoperative |1.4.A.2a| | 1 |
Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
Offside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Nearside Rear coil spring broken |2.4.C.1a| | 1 |
Offside Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
Offside Position lamp not working |4.2.1 |a|| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
Offside Rear Service brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
Nearside Rear Service brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
Service brake efficiency below requirements |1.2.2 |a| |i|| | 1 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Offside Rear Direction indicator not working |1.4.A.2c| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Mechanical brake component has restricted free movement | 1 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 1 |
Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded step underside |2.4.A.3| | 1 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Nearside Rear Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Rear coil spring incomplete |2.4.C.1a| | 1 |
Offside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front front brake binding |3.7.B.1| | 1 |
Offside Front front brake binding |3.7.B.1| | 1 |
Exhaust emissions carbon monoxide content excessive |8.2.1.2 |b|| | 1 |
Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen both |3.5 |a|| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill and lower inner wheel arch |5.3.6 |a| |i|| | 1 |
Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
Offside Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
Steering column flexible coupling is excessively deteriorated |2.2.2 |c|| | 1 |
Nearside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger |6.1.B.2| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner door step |6.1.B.2| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded trailing arm mount/inner wheel arch |2.4.A.3| | 1 |
Offside Front Direction indicators not working |1.4.A.2c| | 1 |
Rear Exhaust mounting missing |7.1.1b| | 1 |
Rear Exhaust has a major leak of exhaust gases back box |7.1.2| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Driver`s seat insecure |6.2.A.1| | 1 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Upper Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Front Upper Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Rear Suspension arm attachment bracket inappropriately repaired |2.4.A.2| | 1 |
Offside Front Upper Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 1 |
Steering column top bearing excessively worn |2.1.2c| | 1 |
Offside Front Shock absorber has an excessively worn bush |2.7.4| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Valve stem seriously damaged |4.1.D.1e| | 1 |
Offside Front Valve stem seriously damaged |4.1.D.1e| | 1 |
Nearside Rear Valve stem seriously damaged |4.1.D.1e| | 1 |
Offside Rear Valve stem seriously damaged |4.1.D.1e| | 1 |
Nearside Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 1 |
Offside Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 1 |
Offside Vehicle structure is fractured and structural rigidity is significantly reduced Sill (6.1.1 (a) (i)) | 1 |
Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced Inner sill (6.1.1 (a) (i)) | 1 |
Offside Vehicle structure is fractured and structural rigidity is significantly reduced Side panel (6.1.1 (a) (i)) | 1 |
Nearside Vehicle structure is fractured and structural rigidity is significantly reduced sill (6.1.1 (a) (i)) | 1 |
Offside Rear Service brake lagging in operation (1.2.1 (d)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Hazard warning lamps inoperative (4.4.1 (e)) | 1 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Hydraulic brake cylinder operating mechanism has excessive travel (1.1.16 (e) (i)) | 1 |
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Nearside Front Lower Seat belt anchorage likely to become detached in the event of a collision mounting point corroded already detached (7.1.1 (a) (ii)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill all way along beside water carrier (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced engine bay area (6.1.1 (c) (i)) | 1 |
Offside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner rear wheel arch (5.3.6 (a) (i)) | 1 |
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner rear wheel arch mounting bracket (5.3.6 (a) (i)) | 1 |
Horn not working (7.7 (a)) | 1 |
Exhaust emissions carbon monoxide content excessive 4.1% (8.2.1.2 (b)) | 1 |
Oil leaking excessively from engine (8.4.1 (a) (i)) | 1 |