Most common failures | No# failures |
---|
Headlamp aim out of alignment | 19 |
Windscreen wiper does not clear the windscreen effectively | 12 |
Registration plate lamp issues | 10 |
Brake pipe excessively corroded | 9 |
Parking brake: efficiency below requirements |3.7.B.7| | 7 |
Service brake: efficiency below requirements |3.7.B.7| | 4 |
Brake hose excessively deteriorated | 4 |
Parking brake lever has no reserve travel |3.1.6b| | 4 |
Offside Stop lamp not working |1.2.1b| | 3 |
Horn not working |1.6.2a| | 3 |
Nearside Stop lamp not working |1.2.1b| | 3 |
Offside Headlamp aim beam image kick up to the offside |1.8| | 3 |
Nearside Steering rack gaiter split |2.2.D.2d| | 3 |
Rear fog lamp not working |1.3.2b| | 2 |
Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Offside Front coil spring broken |2.4.C.1a| | 2 |
Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 2 |
Offside Front Upper Suspension arm has excessive play in a ball joint |2.4.G.2| | 2 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 2 |
Rear fog lamp tell tale not working |1.3.1b| | 2 |
Front Brake valve leaking |3.6.A.1| | 2 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 2 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Brakes imbalanced across an axle | 2 |
Offside Front Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Rear fog lamp not working |1.3.2b| | 2 |
rear brake recording little or no effort |3.7.B.5a| | 2 |
Front Horn not working |1.6.2a| | 2 |
Nearside Rear Stop lamp not working and offside rear not working |1.2.1b| | 1 |
Offside Front Braking system leaking brake nipple has slow leak |3.6.A.1| | 1 |
Offside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Position lamp has a product on the lens or light source which significantly reduces light intensity (4.2.3 (b) (ii)) | 1 |
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step to floor (6.1.1 (c) (i)) | 1 |
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced central inner sill (6.1.1 (c) (i)) | 1 |
Nearside Rear Body component corroded and likely to cause injury lower wing sharp edge (6.2.1 (a) (i)) | 1 |
Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill to floor (6.1.1 (c) (i)) | 1 |
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill to floor (6.1.1 (c) (i)) | 1 |
Emissions not tested |7.3.A.1| | 1 |
Front Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Under step corrosion (6.2.2 (d) (i)) | 1 |
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
Nearside Rear Brake hose bulging under pressure |3.6.B.3| | 1 |
Direction indicators not working |1.4.A.2c| | 1 |
Centre Brake pipe inadequately supported |3.6.B.1| | 1 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 1 |
Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded floor |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded floor |2.4.A.3| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis at wishbone mount |2.4.A.3| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis near engine mounts |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded chassis near engine mount |2.4.A.3| | 1 |
Front brake excessively fluctuating | 1 |
Offside Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Hazard warning switch faulty |1.4.B.1d| | 1 |
Offside Front Braking system leaking |3.6.A.1| | 1 |
Nearside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
Emissions not tested |7.0| | 1 |
Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Front Seat belt retracting mechanism defective |5.2.5b| | 1 |
Nearside Rear Suspension arm corroded and seriously weakened |2.4.G.1| | 1 |
Offside Rear Suspension arm corroded and seriously weakened |2.4.G.1| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer and inner sill and wheel arch |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded outer and inner sill and whee larch. |2.4.A.3| | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Nearside Front front brake binding |3.7.B.1| | 1 |
Offside Front front brake binding |3.7.B.1| | 1 |
Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Front Headlamp not working on main beam |1.7.5a| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
Horn not a continuous or uniform sound |1.6.2e| | 1 |
Nearside Front Upper Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Nearside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
Nearside Front Tie bar/rod rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
An item not tested |Manual| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Fuel cap/sealing device missing |7.2.4a| | 1 |
Offside Steering locking device missing |2.2.C.1g| | 1 |
Nearside engine mounting bracket insecure and likely to fail |6.1.D.1b| | 1 |
Offside engine mounting bracket insecure and likely to fail |6.1.D.1b| | 1 |
Nearside Rear Direction indicator excessively deteriorated so that it is not visible from a reasonable distance |1.4.A.2e| | 1 |
Offside Rear Direction indicator excessively deteriorated so that it is not visible from a reasonable distance |1.4.A.2e| | 1 |
Nearside Rear Direction indicator flashing more than 120 times a minute |1.4.A.2g| | 1 |
Offside Rear Direction indicator flashing more than 120 times a minute |1.4.A.2g| | 1 |
Exhaust engine idle speed too high |7.3.A.2a| | 1 |
Battery insecure |1.9.1| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
rear parking |secondary| brakes imbalanced | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded @ jacking point |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded @ jacking point |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded @ jacking point |2.4.A.3| | 1 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded chassy |2.4.A.3| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded @ chassy |2.4.A.3| | 1 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded inner sill all marked |2.4.A.3| | 1 |
Nearside Front Headlamp insecure |1.7.3| | 1 |
Nearside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Nearside Front Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
Offside Front Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
Front Brake pipe kinked |3.6.B.2b| | 1 |
Offside Rear Braking system leaking |3.6.A.1| | 1 |
Nearside Front Brake pipe twisted |found during steering lock to lock check| |2.2.D.2b| | 1 |
Steering column top bearing excessively worn |2.1.2c| | 1 |
Offside Outer Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Outer Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Obligatory mirror insecure |8.1.1| | 1 |
Front Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Nearside Inner Front Ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Offside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
Offside Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
Brake operation has insufficient reserve pressure/vacuum to provide assistance for at least two more brake applications after the warning lamp or other device has operated |3.3.E.5b| | 1 |
Nearside Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Nearside Front Brake pipe inadequately supported |3.6.B.1| | 1 |
Offside Front Brake pipe inadequately supported |3.6.B.1| | 1 |
Nearside Front brake disc excessively pitted |3.5.1h| | 1 |
Offside Rear Brake pipe inadequately supported |3.6.B.1| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Upper Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Headlamp not working on main beam |1.7.5a| | 1 |
Registration plate issues | 1 |
Rear Rear fog lamp not working |1.3.2b| | 1 |
Nearside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Front Headlamp not working on main beam |1.7.5a| | 1 |