>

MOT History from tests of petrol TRIUMPH TT600s year 2003

Review the list of common TRIUMPH TT600 failures below or to perform a specific mot history check on your TRIUMPH then use our popular KnowYourCar service

mot history
Pass percent:81.96%
(The average a petrol TRIUMPH TT600 year 2003 passes without issue)
Based on:1,308 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment43
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|17
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|11
Registration plate issues10
Horn not working |1.7.3a|9
Drive chain excessively loose |6.2.1d|7
Front position lamp does not illuminate immediately when switched on |1.1.3a|7
Rear reflector on motorcycle missing |1.4.1|6
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|5
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|5
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||5
Rear Stop lamp remains on when the brake is released |1.3.1e|5
Offside Front Direction indicator not working |1.5.1c|4
Steering headbearing has excessive free play |2.2.2|4
Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Steering movement excessively stiff with the wheel raised |2.2.1b|4
Offside Front Direction indicator insecure |1.5.3b|3
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|3
Headlamp aim beam image kick up to the offside |1.6|3
Front shock absorber seal failed and leaking oil |2.3.3|3
Direction indicators flashing more than 120 times per minute |1.5.1c|3
Steering movement excessively `notchy` with the wheel raised |2.2.1b|3
Throttle operating incorrectly |6.2.1f|3
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||3
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||3
Front wheel bearings have excessive free play |2.3.5b|3
Drive chain excessively tight |6.2.1d|3
Front position lamp does not illuminate immediately when switched on (1.1.3a)3
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))3
Nearside Front shock absorber seal failed and leaking oil |2.3.3|2
Front Brake lever has inadequate reserve travel |3.1.3b|2
Rear Brake pedal mounting cracked . |3.1.2c|2
Offside Front Brake disc|s| excessively worn |3.2.A1l|2
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|2
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|2
Front Brake disc|s| is excessively distorted |3.2.A1m|2
Rear Rear reflector on motorcycle missing |1.4.1|2
Headlamp aim beam image kick-up is to the offside |1.6.1|2
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|2
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|2
Exhaust mounting does not fully support the exhaust system |7.1.1.c|2
Offside Front shock absorber seal failed and leaking oil |2.3.3|2
Offside Front Direction indicators not working |1.5.1c|2
Nearside Rear Direction indicator not working |1.5.1c|2
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))2
Front Brake lever has insufficient reserve travel (1.1.2 (a))2
Drive chain excessively tight (6.1.7 (k) (i))2
Drive chain excessively loose (6.2.1d)2
Rear wheel bearings have excessive free play (2.4.A.2c)2
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))2
Nearside Rear Rear position lamp missing |1.1.1a|1
Rear Footrest missing |6.2.1a|1
Front Direction indicator not working |1.5.1c|1
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Rear Stop lamp not working |4.3.1 |a| |ii||1
Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a||1
Front All position lamps do not illuminate immediately when switched on |1.1.3a|1
Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b|1
Fuel tank leaking |7.2.1a|1
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|1
Nearside Rear Upper Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Front Stop lamp switch with a delay in operation |4.3.2 |a| |ii||1
Front Roller brake test indicates a binding brake |3.3.A1a|1
Rear wheel bearings are excessively rough |2.4.A.2c|1
Rear suspension bush has excessive free play |2.4.A2a|i||1
Front Wheel has an excessively distorted bead rim. |4.2.2|1
Nearside Front Direction indicators not working |1.5.1c|1
Rear suspension movement is excessively stiff |2.4.A.3b|1
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Front Floor brake test indicates a binding brake |3.3.C2c|1
Rear Shock absorber has negligible damping effect |5.3.2 |b||1
Brake lever has insufficient reserve travel |1.1.2 |a||1
Front Brake lagging in operation Spongy |1.2.1 |d||1
Horn not working |7.7 |a| |ii||1
Nearside Front Direction indicator not working |4.4.1 |a| |ii||1
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i||1
Horn control not functioning. |1.7.2b|1
Fuel pipe union leaking |7.2.1a|1
Offside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Nearside Front Roller brake test indicates a severely juddering brake |3.3.A1b|1
Offside Front Roller brake test indicates a severely juddering brake |3.3.A1b|1
Steering movement excessively rough with the wheel raised |2.2.1b|1
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|1
Front Steering movement excessively rough with the weight on the lower bearing |2.2.1a|1
Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Front Front wheel bearings have excessive free play |2.3.5b|1
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|1
Front Throttle operating incorrectly |6.2.1f|1
Nearside Front Direction indicator not working |1.5.1c|1
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Offside Rear Footrest missing |6.2.1a|1
Brake lever has inadequate reserve travel |3.1.3b|1
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c|1
Rear wheel spindle securing nut|s| loose |2.4.A.2b|1
Rear suspension bearing has excessive free play |2.4.A2a|i||1
Front position lamp incorrect colour |1.1.2a|1
Front Headlamp aim beam image kick up to the offside |1.6|1
Offside Rear Direction indicator not working |1.5.1c|1
Front Stop lamp not working |4.3.1 |a| |ii||1
Stop lamp does not illuminate immediately a brake applies from front brake lever |1.3.1a|1
Stop lamp remains on when the brake is released |1.3.1e|1
Exhaust markings indicating not for road use or similar wording Replacement legal silencer fitted |7.1.4|1
Offside Rear Exhaust markings indicating not for road use or similar wording |7.1.4|1
Nearside Rear Footrest insecure |6.2.1a|1
Front Front wheel bearings are excessively rough |2.3.5b|1
Front Hydraulic brake control feels spongy |3.1.4a|1
Steering control handlebar movement restricted by taut cables |2.1.2c|1
Offside Rear Footrest insecure pillion footrest bracket broken |6.2.1a|1
Nearside Front Shock absorber missing |5.3.2 |a| |ii||1
Offside Front Shock absorber missing |5.3.2 |a| |ii||1
Nearside Front Brake locking device missing |3.2.A1e|1
Stop lamp does not illuminate immediately a brake applies when front brake applied |1.3.1a|1
Offside Footrest insecure |6.2.1a|1
Front wheel spindle loose |2.3.3a|1
Rear Brake pipe union leaking fluid rear brake caliper leaking fliud from banjo union |3.2.B4|1
Offside Front Brake lever has inadequate reserve travel |3.1.3b|1
Nearside Rear Drive chain excessively tight |6.2.1d|1
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Front Brake lever has insufficient reserve travel |1.1.2 |a||1
Offside Steering lock stop missing |2.1.3|1
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|1
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Rear wheel bearings have excessive free play |2.4.A.2c|1
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|1
Rear Stop lamp does not emit a steady light |1.3.1b|1
Nearside Rear Drive chain excessively loose |6.2.1d|1
Nearside Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|1
Front wheel spindle securing nut locking device insecure |2.3.5a|1
Offside Rear Rear wheel spindle securing nut locking device insecure |2.4.A.2b|1
Rear Brake master cylinder insecurely mounted |3.2.B1a|1
Front Steering headbearing has excessive free play |2.2.2|1
Front Wheel bearing rough when rotated |5.1.3 |b| |i||1
Rear position lamp insecure |1.1.1c|1
Footrest missing |6.2.1a|1
Nearside Front Direction indicator incorrect colour |1.5.1b|1
Rear Direction indicators not working |1.5.1c|1
Front Direction indicator insecure |1.5.3b|1
Drive chain worn to excess |6.2.1e|1
Exhaust markings indicating not for road use or similar wording |7.1.4|1
Wheel alignment incorrect which adversely affects the steering |2.5.1|1
Front Stop lamp does not emit a steady light |1.3.1b|1
Front Roller brake test indicates a severely juddering brake |3.3.A1b|1
Nearside Front Brake disc|s| excessively worn |3.2.A1l|1
Rear Brake excessively binding (1.2.1 (f))1
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))1
Stop lamp not working by control 2 (4.3.1 (a) (ii))1
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii))1
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))1
Drive chain excessively loose (6.1.7 (c) (i))1
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))1
Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)1
Drive chain excessively tight (6.2.1d)1
Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)1
Front Stop lamp switch with a delay in operation front brake switch replaced (4.3.2 (a) (ii))1
Rear wheel spindle securing nut locking device insecure (2.4.A.2b)1
Front Stop lamp not working (4.3.1 (a) (ii))1
Stop lamp not working rear brake switch adjusted (4.3.1 (a) (ii))1
Registration plate lamp issues1
Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii))1
Front Brake fluid contaminated (1.8 (a))1
Drive chain worn to excess (6.1.7 (c) (i))1
Drive chain sprocket worn to excess (6.1.7 (c) (i))1
Throttle operating incorrectly (6.2.7 (a) (i))1
Rear Position lamp not working (4.2.1 (a))1
Front Position lamp not working (4.2.1 (a))1
Clutch lever positioned so it cannot be readily operated Insecure (6.2.7 (b))1
Rear Drive chain excessively loose rear lock nuts (6.1.7 (c) (i))1
Front Stop lamp not working lever (4.3.1 (a) (ii))1
Riders seat with a defective supporting structure right side front left side by foot peg (6.2.5 (a) (i))1
Stop lamp not working Front control (4.3.1 (a) (ii))1
Front Brake lever has abnormal movement of levers indicating excessive wear or maladjustment front brake lever no reserve travel (1.1.15 (f))1
Rear All direction indicators adversely affected by the operation of another lamp (4.4.3 (b))1
Stop lamp adversely affected by the operation of another lamp (4.3.3 (b))1
Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (b))1
Handlebar grip insecure to handlebar (2.2.1 (d) (ii))1
Front Valve stem seriously misaligned (5.2.3 (j))1
Front Wheel bearing has excessive play (5.1.3 (a) (i))1
Front Steering operation restricted in free movement from lock to lock wiring harness multi plug restricting full lock to the right (2.1.4 (c))1
Front brake disc in such a condition that it is seriously weakened1
Front Shock absorber has a serious fluid leak both fork seals leaking (5.3.2 (b))1
Offside Front Brake disc contaminated contaminated with fork oil (1.1.14 (b))1
Offside Front Footrest insecure cracked on bracket bottom mount (6.2.12 (a))1
Brake lever has insufficient reserve travel (1.1.2 (a))1
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))1
Offside Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii))1
Offside Rear Brake excessively binding (1.2.1 (f))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy