Most common failures | No# failures |
---|
Headlamp aim out of alignment | 88 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 35 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 32 |
Registration plate issues | 28 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 23 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 22 |
Horn not working |1.7.3a| | 22 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 19 |
Drive chain excessively loose |6.2.1d| | 19 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 18 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 17 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 15 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 14 |
Rear reflector on motorcycle missing |1.4.1| | 12 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 10 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 10 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 9 |
Drive chain excessively tight |6.2.1d| | 8 |
Front wheel bearings have excessive free play |2.3.5b| | 8 |
Stop lamp remains on when the brake is released |1.3.1e| | 8 |
Front Hydraulic brake control feels spongy |3.1.4a| | 7 |
Nearside Front Direction indicators not working |1.5.1c| | 7 |
Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Nearside Rear Direction indicator not working |1.5.1c| | 7 |
Headlamp aim beam image kick up to the offside |1.6| | 7 |
Front Position lamp not working (4.2.1 (a)) | 7 |
Offside Rear Footrest insecure |6.2.1a| | 6 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 6 |
Offside Front Direction indicator not working |1.5.1c| | 6 |
Stop lamp remains on when the brakes are released | 6 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Front wheel bearings are excessively rough |2.3.5b| | 6 |
Drive chain worn to excess |6.2.1e| | 6 |
Nearside Front Direction indicator not working |1.5.1c| | 6 |
Steering headbearing has excessive free play |2.2.2| | 6 |
Nearside Front Footrest insecure |6.2.1a| | 6 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 5 |
Nearside Front Direction indicator insecure |1.5.3b| | 5 |
Offside Front Direction indicators not working |1.5.1c| | 5 |
Throttle operating incorrectly |6.2.1f| | 4 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Offside Front Direction indicator insecure |1.5.3b| | 4 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 4 |
Offside Rear Direction indicators not working |1.5.1c| | 4 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 4 |
Offside Front Footrest insecure |6.2.1a| | 4 |
Nearside Rear Direction indicators not working |1.5.1c| | 4 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 4 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 4 |
Horn not working (7.7 (a) (ii)) | 4 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Offside Front Direction indicator missing |1.5.1a| | 3 |
Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Horn not working |7.7 |a| |ii|| | 3 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 3 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
Front Brake disc|s| insecure |3.2.A1g| | 3 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 3 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 3 |
Rear Drive chain excessively loose |6.2.1d| | 3 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Offside Rear Direction indicator not working |1.5.1c| | 3 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 3 |
Drive chain excessively loose (6.1.7 (c) (i)) | 3 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 3 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 3 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Nearside Rear Motorcycle structure cracked |6.1.1a| | 2 |
Horn control defective |1.7.2a| | 2 |
Nearside Front Direction indicator missing |1.5.1a| | 2 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 2 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Rear Drive chain excessively tight |6.2.1d| | 2 |
Brake performance not tested |3.3| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Offside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Brake lever cannot be applied smoothly |3.1.3d| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Horn is not continous or uniform |1.7.3c| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Rear Drive chain worn to excess |6.2.1e| | 2 |
Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
Front Lower Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Footrest insecure |6.2.1a| | 2 |
Brake pedal mounting cracked . |3.1.2c| | 2 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 2 |
Horn control not functioning. |1.7.2b| | 2 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Headlamp incorrect colour |1.2.1| | 2 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front Horn not working |1.7.3a| | 2 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Front Brake disc contaminated (1.1.14 (b)) | 2 |
Drive chain excessively tight (6.1.7 (k) (i)) | 2 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Horn sound not in accordance with requirements (7.7 (c)) | 2 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 2 |
Horn not working (7.7 (a)) | 2 |
Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 2 |