Most common failures | No# failures |
---|
Headlamp aim out of alignment | 40 |
Parking brake: efficiency below requirements |3.7.B.7| | 32 |
Registration plate lamp issues | 13 |
Brakes imbalanced across an axle | 13 |
Windscreen wiper does not clear the windscreen effectively | 11 |
Rear parking brake recording little or no effort | 10 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 9 |
Steering headbearing has excessive free play |2.2.2| | 9 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Registration plate issues | 8 |
Horn not working |1.6.2a| | 8 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Rear brake binding | 7 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Service brake: efficiency below requirements |3.7.B.7| | 6 |
Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 5 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
Brake hose excessively deteriorated | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Offside Front front brake binding |3.7.B.1| | 4 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Headlamp not working on main beam |1.7.5a| | 4 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
All position lamps not working |1.1.A.3b| | 4 |
Parking brake: efficiency below requirements |3.7.C.1b| | 4 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Nearside Rear Braking system leaking |3.6.A.1| | 3 |
Offside Steering rack gaiter split |2.2.D.2d| | 3 |
Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b| | 3 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Headlamp not working on dipped beam |1.7.5a| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Braking system leaking |3.6.A.1| | 3 |
Nearside Front wheel bearing has excessive play |2.5.A.3c| | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Parking brake lever has no reserve travel |3.1.6b| | 3 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 3 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 3 |
Brake performance not tested |3.7.A.1| | 3 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Horn not working |1.7.3a| | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Nearside Steering lock stop missing |2.1.3| | 2 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Nearside front brake binding |3.7.B.1| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
Offside Front wheel bearing rough when rotated |2.5.A.2| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Nearside Headlamp not working on main beam |1.7.5a| | 2 |
Offside Headlamp not working on main beam |1.7.5a| | 2 |
Rear Mechanical brake component has restricted free movement | 2 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 2 |
Driver`s seat insecure |6.2.A.1| | 2 |
Nearside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Steering column top mounting bracket insecure |2.1.2d| | 2 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
Exhaust system not adequately supported |7.1.1| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Windscreen wiper blade missing |8.2.2| | 2 |
Indicator switch faulty |1.4.A.1| | 2 |
Offside Rear wheel bearing has excessive play |2.6.2| | 2 |
Rear brake application uneven | 2 |
Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Nearside Upper Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Nearside Handlebar handgrip missing |2.1.1c| | 1 |
Front Brake lever attachment screws loose |3.1.2b| | 1 |
Nearside Front Brake lever attachment screws missing |3.1.2b| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Offside Steering lock stop missing |2.1.3| | 1 |
Offside Front Upper Steering column flexible coupling cracked and unserviceable |2.2.C.1d| | 1 |
Front Steering rack insecure |2.2.B.1a| | 1 |
Front All position lamps not working |1.1.A.3b| | 1 |
Front Horn not working |1.6.2a| | 1 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Front Lower Axle swivel joint has excessive play |2.5.A.3b| | 1 |
Front Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
Front Anti-roll bar attachment bracket/mounting bolt missing |2.4.G.1| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Brake lever is inoperative |3.1.3c| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear Wheel spoke excessively bent |4.2.1b| | 1 |
Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Nearside Brake pipe inadequately clipped (3.6.B.1) | 1 |
Front Steering column flexible coupling retaining device insecure (2.1.6) | 1 |
Central Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Horn not working (1.6.2a) | 1 |
Fuel cap/sealing device sealing washer missing (7.2.4c) | 1 |
Nearside Rear position lamp(s) not working (1.1.A.3b) | 1 |
Offside Rear position lamp(s) not working (1.1.A.3b) | 1 |
Offside Rear Exhaust system not adequately supported (7.1.1) | 1 |
Centre Rear Exhaust has a major leak of exhaust gases (7.1.2) | 1 |
Offside Front Lower Shock absorber insecure (2.7.2b) | 1 |
Nearside Front Upper Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2) | 1 |
Offside Front Upper Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2) | 1 |
Nearside Front Steering rack gaiter split (2.2.D.2d) | 1 |
Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c) | 1 |
Nearside Front Suspension arm attachment bracket/mounting insecure (2.4.G.1) | 1 |
Parking brake: efficiency below requirements (3.7.B.7) | 1 |
Steering column universal joint has excessive play |2.1.5| | 1 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Nearside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Fuel cap/sealing device missing |7.2.4a| | 1 |
Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
Nearside Front Wheel nut|s| loose |4.2.A.1e| | 1 |
Offside Front Wheel nut|s| loose |4.2.A.1e| | 1 |
Nearside Front Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 1 |
Offside Front Shock absorber casing damaged externally so the unit does not function |2.7.2a| | 1 |
Offside Front Suspension arm attachment bracket/mounting nut missing |2.4.G.1| | 1 |
Offside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Nearside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Nearside Front front brake binding |3.7.B.1| | 1 |
Nearside Rear front brake binding |3.7.B.1| | 1 |
Offside Rear front brake binding |3.7.B.1| | 1 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Offside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Brake pedal anti-slip provision missing |3.3.A.1b| | 1 |
Offside Front Service brake indicates brake bind |3.7.D.2a| | 1 |
Offside Front An item not tested |Manual| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride chain |6.2.1h| | 1 |
Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
Offside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Steering column movement between the shaft and steering wheel |2.1.2b| | 1 |
Headlamp switch faulty |1.7.1| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Nearside front brake grabbing severely |3.7.A.2b| | 1 |
Front Passenger`s seat insecure |6.2.A.1| | 1 |
Dipswitch operation does not deflect all main beam headlamps to make them dipped beams |1.7.4b| | 1 |
Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 1 |
Nearside Front Upper Shock absorber has an excessively worn bush |2.7.4| | 1 |
Offside Front Upper Shock absorber has an excessively worn bush |2.7.4| | 1 |
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Fuel cap/sealing device sealing washer missing |7.2.4c| | 1 |
Front Front suspension assembly component loose |2.3.1| | 1 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Brake cable has restricted free movement |3.5.1k| | 1 |
Steering rack insecure |2.2.B.1a| | 1 |
Nearside Rear Radius arm synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Rear Radius arm synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front brake disc excessively pitted |3.5.1h| | 1 |
Nearside rear brake grabbing severely |3.7.A.5b| | 1 |
Brake linkage has restricted free movement |3.5.1k| | 1 |
Offside Rear Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Offside Front Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 1 |
Nearside Statutory seat belt missing |5.1.1| | 1 |
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Fuel cap sealing washer missing |7.2.2c| | 1 |
Offside Direction indicators not working |1.4.A.2c| | 1 |
Hazard warning switch faulty |1.4.B.1d| | 1 |
Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Front Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 1 |
Offside Front Anti-roll bar linkage fractured |2.4.G.1| | 1 |
Nearside Front coil spring fractured |2.4.C.1a| | 1 |
Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Offside Front Brake lever insecure |3.1.2a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Stop lamp insecure brake light switch broken |1.3.3b| | 1 |
Offside Rear Brake hose leaking |3.6.A.1| | 1 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 1 |
Nearside Front Road wheel spoke cracked |4.2.A.1b| | 1 |
Nearside Front Road wheel spoke excessively loose |4.2.A.1b| | 1 |
Stop lamp not working |1.2.1b| | 1 |
Nearside Rear wheel bearing rough when rotated |2.6.1| | 1 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Offside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Road wheel distorted |4.2.A.1a| | 1 |
Nearside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Brake pedal has insufficient reserve movement |3.3.A.5| | 1 |
Windscreen washer control is inaccessible to the driver |8.2.1a| | 1 |
Front Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Outer Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Outer Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Nearside Rear Brake cable has restricted free movement |3.5.1k| | 1 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Offside Rear Brake lever has restricted free movement |3.5.1k| | 1 |
Nearside Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Front Brake locking device missing |3.2.A1e| | 1 |
Nearside Windscreen wiper blade missing |8.2.2| | 1 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Fuel cap/sealing device does not fasten securely by positive means |7.2.4b| | 1 |
Nearside Rear wheel cylinder securing device loose |3.5.1j| | 1 |
Offside Rear wheel cylinder securing device loose |3.5.1j| | 1 |
Front Exhaust mounting missing |7.1.1b| | 1 |
Offside Front suspension has excessive play in a pin or bush of an upper wishbone inner bearing |2.5.B.1a| | 1 |
Nearside Front suspension has excessive play in a track control arm inner bush |2.5.B.2b| | 1 |
Steering locking device missing |2.2.C.1g| | 1 |
Hand operated control valve malfunctioning |3.2.2c| | 1 |
Front Fuel hose leaking |7.2.1a| | 1 |
Steering column top bearing excessively worn |2.1.2c| | 1 |
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Direction indicators not working |1.4.A.2c| | 1 |
Front Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 1 |
Offside Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
Offside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Brake pipe inadequately supported |3.6.B.1| | 1 |
Service brake: efficiency below requirements |3.7.C.1a| | 1 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Front Vehicle structure has an inadequate repair which adversely affects braking or steering |6.1.A.1| | 1 |
Rear Vehicle structure has an inadequate repair which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Tie bar/rod insecure |2.4.G.1| | 1 |
Nearside Front Suspension component mounting prescribed area is fractured |2.4.A.3| | 1 |
Offside Rear Rear wheel bearing rough when rotated |2.6.1| | 1 |
Brake pipe excessively corroded | 1 |
Nearside Rear rear brake grabbing severely |3.7.A.5b| | 1 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Steering arm has relative movement at its fixings |2.2.B.1h| | 1 |
Front passenger door does not latch securely closed |6.2.B.1a| | 1 |
Offside Front Lower Direction indicator not working |1.4.A.2c| | 1 |
Indicator tell tale inoperative |1.4.A.2a| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Offside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Offside Front coil spring fractured |2.4.C.1a| | 1 |
Offside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Front Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Direction indicators not in good working order |function impaired| |1.5.A1b| | 1 |
Nearside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Inner Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Inner Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
Offside Rear Brake hose twisted |3.6.B.4c| | 1 |
Front Direction indicator not working |1.4.A.2c| | 1 |
Rear Direction indicator not working |1.4.A.2c| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Fuel pipe union leaking |7.2.3| | 1 |
Offside Rear Lower Fuel tank leaking |7.2.1a| | 1 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |