Most common failures | No# failures |
---|
Headlamp aim out of alignment | 62 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 20 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 20 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 18 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 16 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 13 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 11 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 11 |
Horn not working |1.7.3a| | 8 |
Rear reflector on motorcycle missing |1.4.1| | 7 |
Registration plate issues | 6 |
Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 6 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Offside Front Footrest insecure |6.2.1a| | 5 |
Drive chain excessively loose |6.2.1d| | 5 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Nearside Front Footrest insecure |6.2.1a| | 4 |
Rear Drive chain excessively loose |6.2.1d| | 4 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 4 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 4 |
Rear Brake excessively binding (1.2.1 (f)) | 4 |
Horn not working (7.7 (a) (ii)) | 4 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 4 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 3 |
Rear Brake disc|s| cracked |3.2.A1g| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Front Horn not working |1.7.3a| | 3 |
Throttle operating incorrectly |6.2.1f| | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Offside Front Brake disc|s| cracked |3.2.A1g| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 2 |
Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
An item not tested |Manual| | 2 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Drive chain fouling another component |6.2.1d| | 2 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Brake pipe union leaking fluid |3.2.B4| | 2 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Registration plate lamp issues | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Rear Brake disc fractured (1.1.14 (a) (ii)) | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Drive chain worn to excess (6.1.7 (c) (i)) | 2 |