Most common failures | No# failures |
---|
Headlamp aim out of alignment | 6 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Registration plate issues | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Fuel cap sealing washer torn |7.2.2c| | 1 |
Nearside Fuel system component leaking |7.2.1a| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Fuel pipe union leaking |7.2.1a| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Brake lever attachment screws missing |3.1.2b| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Front Fuel system component insecure |7.2.1b| | 1 |
Throttle operating incorrectly sticking open |6.2.1f| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Horn missing |1.7.1| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Registration plate lamp issues | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
An item not tested |Manual| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride Front wheel spindle clamp |6.2.1h| | 1 |
Brake locking device insecure front brake reaction arm nut |3.2.A1e| | 1 |
Rear position lamp does not illuminate immediately when it is switched on (1.1.3a) | 1 |
Rear wheel spindle securing nut locking device missing (2.4.A.2b) | 1 |