Most common failures | No# failures |
---|
Headlamp aim out of alignment | 35 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 7 |
Rear reflector missing (4.8.2 (a) (ii)) | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 4 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 4 |
Registration plate issues | 4 |
Front Brake excessively binding (1.2.1 (f)) | 3 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 3 |
Riders seat insecure (6.2.5 (a) (ii)) | 2 |
Rear Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 2 |
Horn not working (7.7 (a)) | 2 |
Front Horn not working (7.7 (a)) | 2 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 2 |
Brake excessively binding Front (1.2.1 (f)) | 1 |
Valve stem seriously damaged Rear (5.2.3 (j)) | 1 |
Steering headbearing excessively stiff or notchy notchy with front wheel raised (2.2.2 (f) (i)) | 1 |
Rear Brake lining(s) less than 1.0 mm thick (1.1.13 (a)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Offside Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Brake indicates excessive fluctuation of brake effort 50 KGF - CL -GM (1.2.1 (e)) | 1 |
Central Front Upper Steering operation restricted in free movement from lock to lock steering impeded by after market crash bars being fitted, causing wiring loom to catch and prevent R/H lock. (2.1.4 (c)) | 1 |
Brake performance not tested Not Tested Due To Defective Rear Brake (1.2.1 (g)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Central Front Steering headbearing has excessive wear or free play head bearings adjusted (2.2.2 (f) (i)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Position lamp not working Front (4.2.1 (a)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Rear Brake lagging in operation (1.2.1 (d)) | 1 |
Central Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Central Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Central Front Horn not working (7.7 (a)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Front Brake disc contaminated (1.1.14 (b)) | 1 |
Rear Brake has no recorded effort at a wheel Rear brake bleed carried out. (1.2.1 (a) (ii)) | 1 |
Rear Footrest missing both (6.2.12 (a)) | 1 |
Rear Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Headlamp lens seriously defective light cover OFF ROAD USE ONLY and very dirty (4.1.1 (b) (ii)) | 1 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Brake performance not tested PADS WORN (1.2.1 (g)) | 1 |
Nearside Front All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Central Front Brake excessively binding (1.2.1 (f)) | 1 |
Offside Front Lower Brake master cylinder defective but brake still operating NO RESERVE FOULS SWITCH GEAR (1.1.10 (b) (i)) | 1 |