MOT History from tests of petrol TRIUMPH TIGERs year 2003

Review the list of common TRIUMPH TIGER failures below or to perform a specific mot history check on your TRIUMPH then use our popular KnowYourCar service

mot history

Pass percent:87.06%

(The average a petrol TRIUMPH TIGER year 2003 passes without issue)

Based on:4,196 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	80
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	34
Drive chain excessively loose \|6.2.1d\|	34
Horn not working \|1.7.3a\|	31
Front Roller brake test indicates a binding brake \|3.3.A1a\|	28
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	24
Registration plate issues	15
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	13
Exhaust markings indicating not for road use or similar wording \|7.1.4\|	10
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	10
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	10
Rear wheel bearings have excessive free play \|2.4.A.2c\|	10
Front Floor brake test indicates a binding brake \|3.3.C2c\|	9
Nearside Front Brake disc\|s\| cracked \|3.2.A1g\|	9
Front Front wheel bearings have excessive free play \|2.3.5b\|	8
Drive chain worn to excess \|6.2.1e\|	8
Rear Brake disc\|s\| excessively worn \|3.2.A1l\|	7
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	7
Front wheel bearings have excessive free play \|2.3.5b\|	7
Front Brake excessively binding (1.2.1 (f))	7
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	6
Offside Headlamp aim beam image kick up to the offside \|1.6\|	6
Drive chain excessively tight \|6.2.1d\|	6
Headlamp aim beam image kick up to the offside \|1.6\|	6
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	6
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	6
Front Stop lamp not working (4.3.1 (a) (ii))	6
Throttle operating incorrectly \|6.2.1f\|	5
Horn not working \|7.7 \|a\| \|ii\|\|	5
Drive chain excessively loose \|6.1.7 \|c\| \|i\|\|	5
Horn not loud enough to be heard by another road user \|1.7.3a\|	4
Rear Brake pedal attachment screws loose \|3.1.2b\|	4
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	4
Rear Floor brake test indicates a binding brake \|3.3.C2c\|	4
Horn not working (7.7 (a) (ii))	4
Front Brake excessively binding \|1.2.1 \|f\|\|	3
Rear Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	3
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	3
Rear Brake disc\|s\| cracked \|3.2.A1g\|	3
Front Roller brake test indicates a severely juddering brake \|3.3.A1b\|	3
Rear Drive chain excessively loose \|6.2.1d\|	3
Nearside Front Direction indicator not working \|1.5.1c\|	3
Nearside Rear Direction indicator insecure \|1.5.3b\|	3
Nearside Rear Direction indicator not working \|1.5.1c\|	3
Rear reflector on motorcycle missing \|1.4.1\|	3
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	3
Front Brake disc\|s\| cracked \|3.2.A1g\|	3
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	3
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	3
Front Hydraulic brake control feels spongy \|3.1.4a\|	3
Steering headbearing excessively stiff or notchy \|2.2.2 \|f\| \|i\|\|	3
Front Brake lever has inadequate reserve travel \|3.1.3b\|	3
Rear Brake excessively binding \|1.2.1 \|f\|\|	3
Rear Exhaust markings indicating not for road use or similar wording \|7.1.4\|	3
Brake pedal insecure \|3.1.2a\|	3
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	3
Rear Brake caliper\|s\| insecure \|3.2.A1j\|	3
Rear Stop lamp not working (4.3.1 (a) (ii))	3
Drive chain excessively loose (6.1.7 (c) (i))	3
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))	3
Nearside Front Footrest insecure \|6.2.1a\|	2
Offside Footrest insecure \|6.2.1a\|	2
Rear Brake disc\|s\| excessively scored \|3.2.A1l\|	2
Front An item not tested \|Manual\|	2
Rear Floor brake test indicates a sticking brake \|3.3.C2c\|	2
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition \|8.1.1 \|a\|\|	2
Offside Front Direction indicator incorrect colour \|1.5.1b\|	2
Rear Brake disc significantly and obviously worn \|1.1.14 \|a\| \|i\|\|	2
Offside Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Exhaust is leaking and excessively noisey \|7.1.1b\|	2
Front Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	2
Brake pedal attachment screws loose \|3.1.2b\|	2
Offside Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Offside Front Direction indicator not working \|1.5.1c\|	2
Front Horn not working \|1.7.3a\|	2
Drive chain so loose it is likely to fail \|6.1.7 \|c\| \|ii\|\|	2
Roller brake test indicates a binding brake \|3.3.A1a\|	2
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	2
Headlamp light source and lamp not compatible \|4.1.4 \|c\|\|	2
Nearside Footrest insecure \|6.2.1a\|	2
Front position lamp incorrect colour \|1.1.2a\|	2
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	2
Offside Front Brake disc\|s\| cracked \|3.2.A1g\|	2
Brake pedal has inadequate reserve travel \|3.1.3b\|	2
Rear Brake pedal insecure \|3.1.2a\|	2
Offside Front Direction indicators not working \|1.5.1c\|	2
Offside Front Headlamp aim beam image kick up to the offside \|1.6\|	2
Riders seat insecure \|6.2.1a\|	2
Front Direction indicator not working \|1.5.1c\|	2
Rear Direction indicator not working \|1.5.1c\|	2
Front Brake lever has insufficient reserve travel \|1.1.2 \|a\|\|	2
Fuel tank leaking \|7.2.1a\|	2
Rear Brake disc\|s\| has excessive run out \|3.2.A1m\|	2
Rear Wheel bearing has excessive play \|5.1.3 \|a\| \|i\|\|	2
Stop lamp remains on when the brakes are released	2
Rear Brake pedal insecure (1.1.2 (e) (i))	2
Rear Position lamp not working (4.2.1 (a))	2
Front Position lamp not working (4.2.1 (a))	2
Drive chain excessively tight (6.1.7 (k) (i))	2
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))	2
Exhaust markings indicating not for road use or similar wording (6.1.2 (c))	2
Drive chain so worn it is likely to fail (6.1.7 (c) (ii))	2
Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)	2
Rear Brake excessively binding (1.2.1 (f))	2
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))	2
Horn not working (7.7 (a))	2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	80
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	34
Drive chain excessively loose \|6.2.1d\|	34
Horn not working \|1.7.3a\|	31
Front Roller brake test indicates a binding brake \|3.3.A1a\|	28
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	24
Registration plate issues	15
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	13
Exhaust markings indicating not for road use or similar wording \|7.1.4\|	10
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	10
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	10
Rear wheel bearings have excessive free play \|2.4.A.2c\|	10
Front Floor brake test indicates a binding brake \|3.3.C2c\|	9
Nearside Front Brake disc\|s\| cracked \|3.2.A1g\|	9
Front Front wheel bearings have excessive free play \|2.3.5b\|	8
Drive chain worn to excess \|6.2.1e\|	8
Rear Brake disc\|s\| excessively worn \|3.2.A1l\|	7
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	7
Front wheel bearings have excessive free play \|2.3.5b\|	7
Front Brake excessively binding (1.2.1 (f))	7
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	6
Offside Headlamp aim beam image kick up to the offside \|1.6\|	6
Drive chain excessively tight \|6.2.1d\|	6
Headlamp aim beam image kick up to the offside \|1.6\|	6
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	6
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	6
Front Stop lamp not working (4.3.1 (a) (ii))	6
Throttle operating incorrectly \|6.2.1f\|	5
Horn not working \|7.7 \|a\| \|ii\|\|	5
Drive chain excessively loose \|6.1.7 \|c\| \|i\|\|	5
Horn not loud enough to be heard by another road user \|1.7.3a\|	4
Rear Brake pedal attachment screws loose \|3.1.2b\|	4
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	4
Rear Floor brake test indicates a binding brake \|3.3.C2c\|	4
Horn not working (7.7 (a) (ii))	4
Front Brake excessively binding \|1.2.1 \|f\|\|	3
Rear Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	3
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	3
Rear Brake disc\|s\| cracked \|3.2.A1g\|	3
Front Roller brake test indicates a severely juddering brake \|3.3.A1b\|	3
Rear Drive chain excessively loose \|6.2.1d\|	3
Nearside Front Direction indicator not working \|1.5.1c\|	3
Nearside Rear Direction indicator insecure \|1.5.3b\|	3
Nearside Rear Direction indicator not working \|1.5.1c\|	3
Rear reflector on motorcycle missing \|1.4.1\|	3
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	3
Front Brake disc\|s\| cracked \|3.2.A1g\|	3
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	3
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	3
Front Hydraulic brake control feels spongy \|3.1.4a\|	3
Steering headbearing excessively stiff or notchy \|2.2.2 \|f\| \|i\|\|	3
Front Brake lever has inadequate reserve travel \|3.1.3b\|	3
Rear Brake excessively binding \|1.2.1 \|f\|\|	3
Rear Exhaust markings indicating not for road use or similar wording \|7.1.4\|	3
Brake pedal insecure \|3.1.2a\|	3
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	3
Rear Brake caliper\|s\| insecure \|3.2.A1j\|	3
Rear Stop lamp not working (4.3.1 (a) (ii))	3
Drive chain excessively loose (6.1.7 (c) (i))	3
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))	3
Nearside Front Footrest insecure \|6.2.1a\|	2
Offside Footrest insecure \|6.2.1a\|	2
Rear Brake disc\|s\| excessively scored \|3.2.A1l\|	2
Front An item not tested \|Manual\|	2
Rear Floor brake test indicates a sticking brake \|3.3.C2c\|	2
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition \|8.1.1 \|a\|\|	2
Offside Front Direction indicator incorrect colour \|1.5.1b\|	2
Rear Brake disc significantly and obviously worn \|1.1.14 \|a\| \|i\|\|	2
Offside Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Exhaust is leaking and excessively noisey \|7.1.1b\|	2
Front Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	2
Brake pedal attachment screws loose \|3.1.2b\|	2
Offside Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Offside Front Direction indicator not working \|1.5.1c\|	2
Front Horn not working \|1.7.3a\|	2
Drive chain so loose it is likely to fail \|6.1.7 \|c\| \|ii\|\|	2
Roller brake test indicates a binding brake \|3.3.A1a\|	2
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	2
Headlamp light source and lamp not compatible \|4.1.4 \|c\|\|	2
Nearside Footrest insecure \|6.2.1a\|	2
Front position lamp incorrect colour \|1.1.2a\|	2
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	2
Offside Front Brake disc\|s\| cracked \|3.2.A1g\|	2
Brake pedal has inadequate reserve travel \|3.1.3b\|	2
Rear Brake pedal insecure \|3.1.2a\|	2
Offside Front Direction indicators not working \|1.5.1c\|	2
Offside Front Headlamp aim beam image kick up to the offside \|1.6\|	2
Riders seat insecure \|6.2.1a\|	2
Front Direction indicator not working \|1.5.1c\|	2
Rear Direction indicator not working \|1.5.1c\|	2
Front Brake lever has insufficient reserve travel \|1.1.2 \|a\|\|	2
Fuel tank leaking \|7.2.1a\|	2
Rear Brake disc\|s\| has excessive run out \|3.2.A1m\|	2
Rear Wheel bearing has excessive play \|5.1.3 \|a\| \|i\|\|	2
Stop lamp remains on when the brakes are released	2
Rear Brake pedal insecure (1.1.2 (e) (i))	2
Rear Position lamp not working (4.2.1 (a))	2
Front Position lamp not working (4.2.1 (a))	2
Drive chain excessively tight (6.1.7 (k) (i))	2
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))	2
Exhaust markings indicating not for road use or similar wording (6.1.2 (c))	2
Drive chain so worn it is likely to fail (6.1.7 (c) (ii))	2
Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)	2
Rear Brake excessively binding (1.2.1 (f))	2
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))	2
Horn not working (7.7 (a))	2

MOT History from tests of petrol TRIUMPH TIGERs year 2003

Find us on Facebook