Most common failures | No# failures |
---|
Headlamp aim out of alignment | 46 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 23 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 17 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Drive chain excessively loose |6.2.1d| | 8 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 7 |
Horn not working |1.7.3a| | 6 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 6 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 6 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Rear Brake disc|s| cracked |3.2.A1g| | 5 |
Offside Front Brake disc|s| cracked |3.2.A1g| | 4 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Offside Rear Direction indicators not working |1.5.1c| | 3 |
Horn not working |7.7 |a| |ii|| | 3 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Rear Brake excessively binding |1.2.1 |f|| | 3 |
Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 3 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Wheel fractured significantly reducing the original strength |4.2.1a| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Rear Wheel corroded significantly reducing the original strength |4.2.1a| | 2 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Offside Steering lock stop ineffective |2.1.3| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Offside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Wheel corroded significantly reducing the original strength |4.2.1a| | 2 |
Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Front Direction indicator not working |1.5.1c| | 2 |
Rear Wheel fractured significantly reducing the original strength |4.2.1a| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Rear Brake master cylinder insecurely mounted |3.2.B1a| | 2 |
Registration plate issues | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Front Horn not working |1.7.3a| | 2 |
Front Shock absorber has negligible damping effect |5.3.2 |b|| | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
Outer Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Indicator tell tale not functioning |1.5.2| | 1 |
Front Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Nearside Front Indicator tell tale not functioning |1.5.2| | 1 |
Front Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Headlamp incorrect colour |1.2.1| | 1 |
Nearside Indicator tell tale not functioning |1.5.2| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Offside Front Brake cylinder severely damaged |3.2.B1b| | 1 |
Nearside Front Brake cylinder severely damaged |3.2.B1b| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Indicator switch defective |1.5.4| | 1 |
Rear Wheel spoke missing |4.2.1b| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Rear Brake component is excessively corroded |3.1.5| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Nearside Brake disc|s| cracked |3.2.A1g| | 1 |
Offside Brake disc|s| cracked |3.2.A1g| | 1 |
Nearside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Brake hose excessively twisted |1.1.12 |b| |ii|| | 1 |
Rear Brake hose excessively twisted |1.1.12 |b| |ii|| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Nearside Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Headlamp insecure |1.2.3b| | 1 |
Offside Front Handlebar deformed |2.1.1b| | 1 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Nearside Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Offside Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front Lower Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Offside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Stop lamp light intensity significantly reduced |4.3.3 |a| |ii|| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Stop lamp does not illuminate immediately a brake applies front switch |1.3.1a| | 1 |
An item not tested |Manual| | 1 |
Brake performance not tested |1.2.1 |g|| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Motorcycle structure cracked |6.1.1a| | 1 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Central Rear Wheel corroded to the extent that the wheel could break up alloy wheel corroded on spokes holes cracking and spliting |5.2.2 |c| |ii|| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Brake performance not tested |3.3| | 1 |
Offside Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Offside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Stop lamp missing |1.3.3a| | 1 |
Nearside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Front Indicator switch insecure |1.5.4| | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Rear Brake pedal mounting insecure |3.1.2a| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Nearside Front Brake disc|s| cracked |3.2.A1g| | 1 |
Rear Lower Suspension component pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Central Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Brake cylinder leaking brake light switch leaking (1.1.16 (b) (i)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Central Front Inner Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Offside Rear Outer Brake disc fractured (1.1.14 (a) (ii)) | 1 |
Offside Rear Lower Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
Nearside Rear Lower Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Nearside Front Outer All position lamps not working (4.2.1 (a)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Central Rear Lower Suspension arm attachment bracket/mounting insecure (5.3.3 (a) (i)) | 1 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Rear Brake pedal insecure (1.1.2 (e) (i)) | 1 |
Offside Front Brake component insecure front disc pad securing bolt missing (1.1.21 (c)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |