Most common failures | No# failures |
---|
Headlamp aim out of alignment | 45 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 23 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 16 |
Registration plate issues | 14 |
Drive chain excessively loose |6.2.1d| | 11 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 10 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 8 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 6 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 6 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 5 |
Rear Brake disc|s| cracked |3.2.A1g| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Horn not working |1.7.3a| | 5 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
Drive chain excessively tight |6.2.1d| | 4 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 4 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Rear Brake excessively binding (1.2.1 (f)) | 3 |
Front Brake excessively binding (1.2.1 (f)) | 3 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Rear Position lamp not working |4.2.1 |a|| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Headlamp incorrect colour |1.2.1| | 2 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Rear Brake cylinder severely corroded |3.2.B1b| | 1 |
Rear Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Horn missing |1.7.1| | 1 |
Horn control not readily accesible. |1.7.2a| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Wheel inadequatly repaired significantly reducing the original strength |4.2.1a| | 1 |
Rear wheel bearings are excessively tight |2.4.A.2c| | 1 |
Rear mono-shock insecure |2.4.B.4| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
An item not tested |Manual| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Front shock absorber seal failed and leaking oil both |2.3.3| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Front Steering lock stop ineffective |2.1.3| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Wheel fixing loose |single fixing| spindle nut |5.2.1 |a| |ii|| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Headlamp aim not tested |1.6| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Offside Front Upper Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Offside Front Upper Direction indicator not working |1.5.1c| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Drive chain worn to excess seized links |6.2.1e| | 1 |
Steering headbearing has excessive free play top nut loose |2.2.2| | 1 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Brake performance not tested |3.3| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Fuel system component leaking |6.1.3 |b| |i|| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Nearside Front All position lamps do not illuminate immediately when switched on Side light |1.1.3a| | 1 |
Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake component is severely distorted |3.1.5| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Motorcycle structure excessively distorted |6.1.1a| | 1 |
Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
Nearside Front Brake disc|s| cracked |3.2.A1g| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Centre An item not tested |Manual| | 1 |
Rear Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Rear Chain guard insecure |6.2.1c| | 1 |
Nearside Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Brake lever pivot has excessive free play brake pedal (1.1.1 (b)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Footrest missing rear (6.2.12 (a)) | 1 |
Offside Front Upper Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 1 |
Offside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Front Brake fluid contaminated (1.8 (a)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls front lever (4.3.2 (a) (iii)) | 1 |
Exhaust has a major leak of exhaust gases several in both silencers (6.1.2 (a)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Upper Fork yoke insecure (2.2.2 (d) (i)) | 1 |