Most common failures | No# failures |
---|
Headlamp aim out of alignment | 38 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 18 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 13 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 10 |
Drive chain excessively loose |6.2.1d| | 9 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Registration plate issues | 8 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 5 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 5 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 4 |
Horn not working |1.7.3a| | 4 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Front Hydraulic brake control feels spongy |3.1.4a| | 3 |
Nearside Front Brake disc|s| cracked |3.2.A1g| | 3 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Nearside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Front Brake disc|s| excessively worn |3.2.A1l| | 3 |
Rear Brake disc|s| cracked |3.2.A1g| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Offside Front Brake disc|s| cracked |3.2.A1g| | 3 |
Drive chain excessively tight |6.2.1d| | 3 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Wheel corroded significantly reducing the original strength |4.2.1a| | 2 |
Offside Rear Brake disc|s| cracked |3.2.A1g| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Offside Rear Footrest insecure |6.2.1a| | 2 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
Rear Plate brake test indicates a binding brake |3.3.B1a| | 2 |
Offside Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Rear Brake disc|s| excessively pitted |3.2.A1l| | 2 |
Brake pedal insecure |3.1.2a| | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Horn sound not in accordance with requirements |7.7 |c|| | 1 |
Registration plate lamp issues | 1 |
Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Brake component cracked and seriously reduced in strength |3.2.A1| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
An item not tested |Manual| | 1 |
Offside Rear Brake pipe excessively chafed |3.2.B2a| | 1 |
Offside Front Braking system does not have an approriate system/s fitted according to its age |3.1.1| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Motorcycle structure adversely modified |6.1.1b| | 1 |
Centre Rear Upper Rear reflector on motorcycle missing |1.4.1| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Nearside Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Position lamp switch insecure |1.1.4b| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
Rear Brake component has an inadequate repair |3.1.5| | 1 |
Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Centre Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Front wheel spindle loose |2.3.5a| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear Brake pipe union leaking fluid |3.2.B4| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Upper Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Rear Position lamp not working |4.2.1 |a|| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Nearside Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Front position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
Rear Brake pedal attachment screws loose |3.1.2b| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front Headlamp switch faulty |1.2.4| | 1 |
Front Handlebar handgrip missing |2.1.1c| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Rear Stop lamp not working control 2 |rear brake control| |4.3.1 |a| |ii|| | 1 |
Rear Brake component is severely distorted |3.1.5| | 1 |
Rear Brake pedal mounting insecure |3.1.2a| | 1 |
Rear Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Centre Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Offside Fuel system component leaking |7.2.1a| | 1 |
Offside Front Brake excessively binding |1.2.1 |f|| | 1 |
Offside Rear Brake disc fractured multiple cracks in disc |1.1.14 |a| |ii|| | 1 |
Offside Rear Stop lamp switch with a delay in operation stop light switch faulty, not working to light up bulb |4.3.2 |a| |ii|| | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Offside Rear Position lamp not working (4.2.1 (a)) | 1 |
Front Brake lagging in operation (1.2.1 (d)) | 1 |
Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Brake performance not tested rear pads down to metal disc scoring (1.2.1 (g)) | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Rear Brake grabbing severely (1.2.1 (c)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Throttle operating incorrectly lock to lock increase in revs (6.2.7 (a) (i)) | 1 |
Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Fuel system component leaking fuel tap (6.1.3 (b) (i)) | 1 |
Front Motorcycle structure has a fracture which is likely to adversely affect braking or steering HEADLAMP FAIRING FRAME (6.1.1 (a) (ii)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |