| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 52 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
| Drive chain excessively loose |6.2.1d| | 12 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 8 |
| Rear Brake disc|s| cracked |3.2.A1g| | 7 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 7 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
| Offside Front Brake disc|s| cracked |3.2.A1g| | 5 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 5 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Drive chain excessively tight |6.2.1d| | 4 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 4 |
| Registration plate issues | 4 |
| Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
| Direction indicators not working |1.5.1c| | 3 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 3 |
| Horn not working |1.7.3a| | 3 |
| Rear reflector on motorcycle missing |1.4.1| | 3 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
| Front Brake disc|s| cracked |3.2.A1g| | 2 |
| Handlebar deformed |2.1.1b| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 2 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Nearside Front Brake disc|s| cracked |3.2.A1g| | 2 |
| Fairing so located that it is likely to impede the steering |2.1.2e| | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Drive chain worn to excess |6.2.1e| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Indicator switch insecure |1.5.4| | 2 |
| Rear Drive chain excessively loose |6.2.1d| | 2 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
| Front Wheel corroded significantly reducing the original strength |4.2.1a| | 2 |
| Rear Position lamp not working |4.2.1 |a|| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Rear Brake excessively binding (1.2.1 (f)) | 2 |
| Nearside Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) | 2 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Rear Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Rear Wheel damaged significantly reducing the original strength corrosion around spoke holes |4.2.1a| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
| Front Wheel spoke missing |4.2.1b| | 1 |
| Rear Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Rear Footrest missing |6.2.1a| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Stop lamp insecure |1.3.3b| | 1 |
| Brake pedal insecure |3.1.2a| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
| Steering operation restricted in free movement from lock to lock Hit horn on right lock. |2.1.4 |c|| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Footrest insecure |6.2.1a| | 1 |
| Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Brake component is excessively corroded |3.1.5| | 1 |
| Offside Headlamp insecure |1.2.3b| | 1 |
| Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Front Wheel spoke cracked. |4.2.1b| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Nearside Front Brake hose leaking fluid |3.2.B4| | 1 |
| Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Offside Front Brake hose fouling |3.2.B3b| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Chain guard insecure |6.2.1c| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Front Brake lever insecure |1.1.2 |e| |i|| | 1 |
| Nearside Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Offside Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front Brake component is excessively corroded |3.1.5| | 1 |
| Rear position lamp damaged and function impaired |1.1.1b| | 1 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Headlamp incorrect colour |1.2.1| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Offside Throttle operating incorrectly throttle not returning (6.2.7 (a) (i)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Offside Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
| Rear Brake disc fractured (1.1.14 (a) (ii)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Rear Wheel spindle locking device missing BOTH SIDES (5.2.1 (d)) | 1 |