Most common failures | No# failures |
---|
Headlamp aim out of alignment | 13 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Steering headbearing has excessive free play |2.2.2| | 7 |
Horn not working |1.7.3a| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front Horn not working |1.7.3a| | 2 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Registration plate issues | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Front Headlamp aim not tested |1.6| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Position lamp switch faulty |1.1.4a| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Front Brake lever attachment screws loose |3.1.2b| | 1 |
Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear shock absorber insecurely mounted both |2.4.A.3b| | 1 |
Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Front Motorcycle structure cracked |6.1.1a| | 1 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Horn missing |1.7.1| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Headlamp aim not tested |1.6| | 1 |
An item not tested |Manual| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Stop lamp missing |1.3.3a| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Brake back plate|s| insecure |3.2.A1j| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Front Upper Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Front Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear reflector on motorcycle does not reflect squarely to the rear |1.4.1| | 1 |
Front Brake locking device missing |3.2.A1e| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |