Most common failures | No# failures |
---|
Headlamp aim out of alignment | 9 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
Horn not working |1.7.3a| | 5 |
Horn not loud enough to be heard by another road user |1.7.3a| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Stop lamp affected by the operation of another lamp |1.3.2| | 3 |
Front Wheel spoke excessively loose |4.2.1b| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Nearside Rear Footrest insecure |6.2.1a| | 2 |
Rear Wheel spoke excessively loose |4.2.1b| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Front Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 2 |
Headlamp aim not tested |1.6| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Offside Front Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Stop lamp does not illuminate immediately a brake applies 12v bulb fitted |1.3.1a| | 1 |
Rear position lamp does not illuminate immediately when it is switched on 12v bulb fitted |1.1.3a| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Rear position lamp missing |1.1.1a| | 1 |
Front Steering lock stop maladjusted |2.1.3| | 1 |
Front Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
Vehicle identification number not permanently displayed |6.3.5a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Brake reaction bracket insecure |3.2.A1j| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Rear wheel insecure |4.2.3b| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Nearside Shock absorber has an excessively worn bush |5.3.2 |c|| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Brake lever is inoperative |3.1.3c| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Rear Brake performance not tested |3.3| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Rear reflector on motorcycle missing (1.4.1) | 1 |