Most common failures | No# failures |
---|
Headlamp aim out of alignment | 70 |
Horn not working |1.7.3a| | 28 |
Registration plate issues | 25 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
Drive chain excessively loose |6.2.1d| | 13 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 12 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 10 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Rear reflector on motorcycle missing |1.4.1| | 8 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 7 |
Headlamp aim beam image kick up to the offside |1.6| | 7 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 7 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 7 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Drive chain worn to excess |6.2.1e| | 6 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 6 |
Horn not loud enough to be heard by another road user |1.7.3a| | 6 |
Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 5 |
Registration plate lamp issues | 5 |
Rear reflector missing (4.8.2 (a) (ii)) | 5 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
Drive chain excessively tight |6.2.1d| | 4 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Offside Front Direction indicator not working |1.5.1c| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 3 |
Nearside Front Footrest insecure |6.2.1a| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Offside Front Footrest insecure |6.2.1a| | 3 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Front Drive chain sprocket worn to excess |6.2.1e| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Front Brake lever insecure |3.1.2a| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Rear Brake excessively binding |1.2.1 |f|| | 2 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Front Position lamp not working (4.2.1 (a)) | 2 |
Rear Suspension component pin or bush excessively worn lower shock absorber mount (5.3.4 (a) (i)) | 2 |
All position lamps not working (4.2.1 (a)) | 2 |