>

MOT History from tests of petrol TRIUMPH THRUXTONs year 2008

Review the list of common TRIUMPH THRUXTON failures below or to perform a specific mot history check on your TRIUMPH then use our popular KnowYourCar service

mot history
Pass percent:90.26%
(The average a petrol TRIUMPH THRUXTON year 2008 passes without issue)
Based on:1,438 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment36
Rear reflector on motorcycle missing |1.4.1|16
Registration plate issues14
Front position lamp does not illuminate immediately when switched on |1.1.3a|8
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|7
Rear reflector missing (4.8.2 (a) (ii))7
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Rear Roller brake test indicates a binding brake |3.3.A1a|4
Exhaust markings indicating not for road use or similar wording |7.1.4|4
Front Stop lamp not working (4.3.1 (a) (ii))4
Rear reflector missing |4.8.2 |a| |ii||3
Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Horn not loud enough to be heard by another road user |1.7.3a|3
Drive chain excessively loose |6.2.1d|3
Registration plate lamp issues3
Front Position lamp not working (4.2.1 (a))3
Nearside Rear Footrest missing (6.2.12 (a))3
Offside Rear Footrest missing (6.2.12 (a))3
Rear Brake excessively binding (1.2.1 (f))3
Front Floor brake test indicates a binding brake |3.3.C2c|2
Front Roller brake test indicates a binding brake |3.3.A1a|2
Offside Front Direction indicators not working |1.5.1c|2
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|2
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|2
Wheel alignment incorrect which adversely affects the handling |2.5.1|2
Nearside Front Direction indicators not working |1.5.1c|2
Throttle operating incorrectly |6.2.1f|2
Horn not working (7.7 (a) (ii))2
Stop lamp remains on when the brakes are released2
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))2
Offside Rear All direction indicators not working |4.4.1 |a| |ii||1
Nearside Rear Direction indicator not working |1.5.1c|1
Nearside Handlebar deformed |2.1.1b|1
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|1
Brake lever cannot be applied smoothly |3.1.3d|1
Rear suspension bearing has excessive free play |2.4.A2a|i||1
Brake performance not tested |3.3|1
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a|1
Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b|1
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Rear Brake disc|s| is excessively distorted |3.2.A1m|1
Rear Floor brake test indicates a binding brake |3.3.C2c|1
Front Direction indicator not working |1.5.1c|1
Offside Front Direction indicator not working |1.5.1c|1
Horn not working |7.7 |a| |ii||1
Front Wheel spoke excessively loose |4.2.1b|1
Drive chain worn to excess |6.2.1e|1
Drive chain excessively tight |6.2.1d|1
Front Upper All position lamps do not illuminate immediately when switched on |1.1.3a|1
Nearside Rear Lower Exhaust markings indicating not for road use or similar wording |7.1.4|1
Offside Rear Lower Exhaust markings indicating not for road use or similar wording |7.1.4|1
Rear Stop lamp remains on when the brake is released |1.3.1e|1
Rear Roller brake test indicates a severely juddering brake |3.3.A1b|1
Front Direction indicator incorrect colour |1.5.1b|1
Rear Direction indicator incorrect colour |1.5.1b|1
Nearside Front Direction indicator incorrect colour |1.5.1b|1
Offside Front Direction indicator incorrect colour |1.5.1b|1
Nearside Rear Direction indicator incorrect colour |1.5.1b|1
Offside Rear Direction indicator incorrect colour |1.5.1b|1
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Direction indicators not working |1.5.1c|1
Centre Rear reflector on motorcycle missing |1.4.1|1
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Rear Position lamp not working |4.2.1 |a||1
Front Stop lamp not working Front brake dose not apply brake light |4.3.1 |a| |ii||1
Front Direction indicators not working |1.5.1c|1
Stop lamp remains on when the brake is released |1.3.1e|1
Headlamp aim beam image kick up to the offside |1.6|1
Exhaust markings indicating not for road use or similar wording rear silencers |7.1.4|1
Front All direction indicators light intensity significantly reduced |4.4.3 |a||1
Rear All direction indicators obviously incorrectly positioned |4.4.3 |a||1
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a||1
Offside Footrest missing pillion |6.2.12 |a||1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|1
Rear Rear reflector missing |4.8.2 |a| |ii||1
Front Brake component is excessively corroded |3.1.5|1
Steering headbearing has excessive free play |2.2.2|1
Front Wheel has an excessively distorted bead rim. |4.2.2|1
Front Direction indicator not working (4.4.1 (a) (ii))1
Rear Direction indicator obviously incorrectly positioned (4.4.3 (a))1
Central Rear Rear reflector missing (4.8.2 (a) (ii))1
Nearside Front Direction indicator missing (4.4.1 (a) (ii))1
Front Wheel bearing has excessive play (5.1.3 (a) (i))1
Riders seat insecure (6.2.5 (a) (ii))1
Front Brake hose excessively twisted incorrectly routed likely to foul ignition (1.1.12 (b) (ii))1
Throttle operating incorrectly NOT CLOSING (6.2.7 (a) (i))1
Handlebar grip insecure to handlebar SWITCH GEAR LOOSE LIKELY TO FOUL CLUTCH (2.2.1 (d) (ii))1
Rear Rear reflector missing (4.8.2 (a) (ii))1
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))1
Wheel alignment incorrect which adversely affects the steering (2.4 (a))1
Drive chain excessively loose (6.1.7 (c) (i))1
Nearside Front Direction indicator not working (4.4.1 (a) (ii))1
Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c))1
Front All direction indicators obviously incorrectly positioned (4.4.3 (a))1
Rear All direction indicators obviously incorrectly positioned (4.4.3 (a))1
Front Headlamp insecure (4.1.1 (c))1
Horn not working (7.7 (a))1
Offside Rear Direction indicator not working (4.4.1 (a) (ii))1
Stop lamp not working (4.3.1 (a) (ii))1
Headlamp aim projected beam image obviously incorrect (4.1.2 (c))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy