Most common failures | No# failures |
---|
Headlamp aim out of alignment | 28 |
Registration plate issues | 16 |
Rear reflector on motorcycle missing |1.4.1| | 15 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Drive chain excessively loose |6.2.1d| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected engine rpm increases when handlebars are turned to the right |6.2.7 |a| |ii|| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Offside Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
Offside Fuel system component leaking |7.2.1a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Fuel pipe leaking excessively or a risk of fire O/S |6.1.3 |b| |ii|| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
An item not tested |Manual| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Registration plate lamp issues | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Centre Rear Upper Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Nearside Steering lock stop maladjusted |2.1.3| | 1 |
Stop lamp not working Off front lever |4.3.1 |a| |ii|| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Fuel system component leaking excessively or a risk of fire |6.1.3 |b| |ii|| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Stop lamp not working Front lever (4.3.1 (a) (ii)) | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Nearside Rear Footrest insecure (6.2.12 (a)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Brake lever not releasing correctly and functionality of brakes affected Dry Lever Pivot (1.1.2 (b) (ii)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Nearside Exhaust system insecure (6.1.2 (a)) | 1 |
All direction indicators incorrect colour all showing white (4.4.3 (a)) | 1 |