Most common failures | No# failures |
---|
Headlamp aim out of alignment | 37 |
Registration plate issues | 27 |
Rear reflector on motorcycle missing |1.4.1| | 22 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 8 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 6 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Drive chain excessively loose |6.2.1d| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Horn not working |1.7.3a| | 3 |
Riders seat insecure |6.2.1a| | 3 |
Horn not working (7.7 (a) (ii)) | 3 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride fuel tank insecure |6.2.1h| | 1 |
Nearside Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Offside Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Offside Front Brake fluid reservoir insecurely mounted |3.2.B1a| | 1 |
Front Brake lever has abnormal movement of levers indicating excessive wear or maladjustment clamp loose |1.1.15 |f|| | 1 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Nearside Wheel spoke missing |4.2.1b| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Nearside Drive chain excessively tight |6.2.1d| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Front Upper Direction indicator missing |1.5.1a| | 1 |
Offside Front Upper Direction indicator missing |1.5.1a| | 1 |
Nearside Rear Upper Direction indicator missing |1.5.1a| | 1 |
Offside Rear Upper Direction indicator missing |1.5.1a| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Drive chain sprocket so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Chain guard fouling another component |6.2.1c| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Centre Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Offside Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Throttle operating incorrectly hangs up on lock |6.2.1f| | 1 |
Rear brake binding | 1 |
Headlamp aim not tested HEADLAMP BULB INCORRECTLY FITTED. BEAM CANNOT BE TESTED |4.1.2 |b|| | 1 |
Stop lamp does not illuminate immediately a brake applies front switch |1.3.1a| | 1 |
Offside Rear Wheel spoke missing |4.2.1b| | 1 |
Stop lamp does not illuminate immediately a brake applies Not working from rear brake. |1.3.1a| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Wheel spoke cracked. |4.2.1b| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Offside Fuel hose leaking |7.2.1a| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicator incorrect colour |4.4.3 |a|| | 1 |
Rear Direction indicator obviously incorrectly positioned |4.4.3 |a|| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Shock absorber has a serious fluid leak Both front fork oil seals leaking |5.3.2 |b|| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Centre Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Exhaust markings indicating not for road use or similar wording (6.1.2 (c)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Stop lamp not working front switch not working (4.3.1 (a) (ii)) | 1 |
Fuel pipe leaking (6.1.3 (b) (i)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Central Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Central Front Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
All direction indicators missing all missing (4.4.1 (a) (ii)) | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Shock absorber likely to become detached rear shocker top bolts loose (5.3.2 (a) (ii)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Horn not working (7.7 (a)) | 1 |
Rear Direction indicator obviously incorrectly positioned to close together (4.4.3 (a)) | 1 |
Registration plate lamp issues | 1 |
Rear Brake disc fractured (1.1.14 (a) (ii)) | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |