Most common failures | No# failures |
---|
Headlamp aim out of alignment | 64 |
Registration plate issues | 24 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Registration plate lamp issues | 10 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 10 |
Drive chain excessively loose |6.2.1d| | 10 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Horn not working |1.7.3a| | 7 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Front wheel bearings have excessive free play |2.3.5b| | 6 |
Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 5 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 5 |
Drive chain excessively tight |6.2.1d| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front Brake excessively binding (1.2.1 (f)) | 3 |
Rear Brake excessively binding (1.2.1 (f)) | 3 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 3 |
Fuel system component leaking |7.2.1a| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Nearside Front Direction indicators not working |1.5.1c| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Horn not working (7.7 (a)) | 2 |
Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Nearside Front Direction indicator insecure |1.5.3b| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Front Brake disc|s| cracked |3.2.A1g| | 2 |
Brake performance not tested |3.3| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Drive chain worn to excess (6.1.7 (c) (i)) | 2 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Front Fuel system component leaking |7.2.1a| | 1 |
Nearside Exhaust mounting does not fully support the exhaust system Only one loose bolt on the silencer bracket. |7.1.1.c| | 1 |
Offside Exhaust mounting does not fully support the exhaust system Only one loose bolt on the silencer bracket. |7.1.1.c| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Front Wheel spindle loose |5.2.1 |c| |i|| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Rear Direction indicator missing |1.5.1a| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Brake lever attachment screws missing |3.1.2b| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Front Indicator tell tale not functioning |1.5.2| | 1 |
Centre Rear Upper Direction indicators not working |1.5.1c| | 1 |
Centre Rear Lower Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Front Upper Horn not working |1.7.3a| | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Headlamp aim not tested |1.6| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen poor pattern |4.1.2 |a|| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Horn control defective |1.7.2a| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Lower Front suspension assembly component loose |2.3.1| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Rear suspension bearing excessively deteriorated |2.4A.2a|i|| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Rear Lower Brake pedal pivot excessively tight brake pedel needs lubrication (1.1.1 (a)) | 1 |
Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Horn not working |1.7.3a| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls stop lamp does not work when front brake applied - PRS - loose connection on switch - repair & refit (4.3.2 (a) (iii)) | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Centre Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake disc contaminated (1.1.14 (b)) | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Centre Front wheel bearings have excessive free play |2.3.5b| | 1 |
Centre Front wheel bearings are excessively rough |2.3.5b| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front Horn not working (7.7 (a) (ii)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Fuel system component leaking (6.1.3 (b) (i)) | 1 |
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Centre Front Horn not working |1.7.3a| | 1 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Rear Wheel spoke excessively bent |4.2.1b| | 1 |
Rear Wheel spoke cracked. |4.2.1b| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Upper Fuel hose leaking (6.1.3 (b) (i)) | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Centre Front Headlamp insecure |1.2.3b| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Front Indicator tell tale not functioning |1.5.2| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
Front Brake lever insecure |1.1.2 |e| |i|| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Centre Front Horn missing |1.7.1| | 1 |
Front Horn control not functioning. |1.7.2b| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |