MOT History from tests of petrol TRIUMPH DAYTONAs year 1993

Review the list of common TRIUMPH DAYTONA failures below or to perform a specific mot history check on your TRIUMPH then use our popular KnowYourCar service

mot history

Pass percent:81.18%

(The average a petrol TRIUMPH DAYTONA year 1993 passes without issue)

Based on:1,939 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	68
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	26
Registration plate issues	24
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	23
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	23
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	14
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	13
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	13
Drive chain excessively loose \|6.2.1d\|	12
Horn not working \|1.7.3a\|	11
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	8
Rear Stop lamp not working (4.3.1 (a) (ii))	8
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	8
Headlamp aim beam image kick up to the offside \|1.6\|	7
Offside Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	7
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))	7
Rear wheel bearings have excessive free play \|2.4.A.2c\|	7
Rear Brake disc\|s\| cracked \|3.2.A1g\|	7
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	7
Front Roller brake test indicates a binding brake \|3.3.A1a\|	5
Front Stop lamp not working (4.3.1 (a) (ii))	5
Rear Brake excessively binding (1.2.1 (f))	5
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	5
Front shock absorber seal failed and leaking oil \|2.3.3\|	5
Offside Front Direction indicator not working \|1.5.1c\|	5
Rear reflector missing (4.8.2 (a) (ii))	4
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	4
Rear reflector on motorcycle missing \|1.4.1\|	4
Front Brake disc contaminated (1.1.14 (b))	4
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	4
Drive chain excessively tight \|6.2.1d\|	4
Offside Front Brake disc contaminated (1.1.14 (b))	4
Rear Brake disc fractured (1.1.14 (a) (ii))	3
Front Brake lever has inadequate reserve travel \|3.1.3b\|	3
Rear Floor brake test indicates a binding brake \|3.3.C2c\|	3
Handlebar deformed \|2.1.1b\|	3
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	3
Rear Brake disc\|s\| excessively worn \|3.2.A1l\|	3
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	3
Front wheel bearings have excessive free play \|2.3.5b\|	3
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	3
Rear Brake component has restricted free movement and operation is likely to be impeded \|3.2.A1h\|	3
Offside Rear Direction indicator not working \|1.5.1c\|	3
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	3
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	3
Footrest insecure \|6.2.1a\|	3
Drive chain worn to excess \|6.2.1e\|	3
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))	2
Rear Shock absorber has negligible damping effect (5.3.2 (b))	2
Rear Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	2
Front wheel bearings are excessively rough \|2.3.5b\|	2
Rear Floor brake test indicates a sticking brake \|3.3.C2c\|	2
Offside Rear Footrest insecure \|6.2.1a\|	2
Offside Front Direction indicators not working \|1.5.1c\|	2
Offside Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	2
Nearside Front Direction indicator not working \|1.5.1c\|	2
Front Horn not working (7.7 (a))	2
Front Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	2
Steering headbearing has excessive free play \|2.2.2\|	2
Rear Position lamp not working (4.2.1 (a))	2
Rear Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	2
Stop lamp remains on when the brake is released \|1.3.1e\|	2
Rear Brake disc\|s\| is excessively distorted \|3.2.A1m\|	2
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Brake hose damaged	2
Rear Brake disc\|s\| excessively scored \|3.2.A1l\|	2
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))	2
Rear Rear reflector on motorcycle missing \|1.4.1\|	2
Rear Stop lamp missing \|1.3.3a\|	2
Offside Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	2
Nearside Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	2
Rear Stop lamp does not emit a steady light \|1.3.1b\|	2
Nearside Rear Direction indicator not working \|1.5.1c\|	2
Front Horn not working \|1.7.3a\|	2
Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	2
Nearside Rear Direction indicators not working \|1.5.1c\|	2
Horn not loud enough to be heard by another road user \|1.7.3a\|	2
Headlamp not working on main beam (4.1.1 (a) (ii))	2
Rear suspension component cracked \|2.4.A.1a\|	2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	68
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	26
Registration plate issues	24
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	23
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	23
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	14
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	13
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	13
Drive chain excessively loose \|6.2.1d\|	12
Horn not working \|1.7.3a\|	11
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	8
Rear Stop lamp not working (4.3.1 (a) (ii))	8
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	8
Headlamp aim beam image kick up to the offside \|1.6\|	7
Offside Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	7
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))	7
Rear wheel bearings have excessive free play \|2.4.A.2c\|	7
Rear Brake disc\|s\| cracked \|3.2.A1g\|	7
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	7
Front Roller brake test indicates a binding brake \|3.3.A1a\|	5
Front Stop lamp not working (4.3.1 (a) (ii))	5
Rear Brake excessively binding (1.2.1 (f))	5
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	5
Front shock absorber seal failed and leaking oil \|2.3.3\|	5
Offside Front Direction indicator not working \|1.5.1c\|	5
Rear reflector missing (4.8.2 (a) (ii))	4
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	4
Rear reflector on motorcycle missing \|1.4.1\|	4
Front Brake disc contaminated (1.1.14 (b))	4
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	4
Drive chain excessively tight \|6.2.1d\|	4
Offside Front Brake disc contaminated (1.1.14 (b))	4
Rear Brake disc fractured (1.1.14 (a) (ii))	3
Front Brake lever has inadequate reserve travel \|3.1.3b\|	3
Rear Floor brake test indicates a binding brake \|3.3.C2c\|	3
Handlebar deformed \|2.1.1b\|	3
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	3
Rear Brake disc\|s\| excessively worn \|3.2.A1l\|	3
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	3
Front wheel bearings have excessive free play \|2.3.5b\|	3
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	3
Rear Brake component has restricted free movement and operation is likely to be impeded \|3.2.A1h\|	3
Offside Rear Direction indicator not working \|1.5.1c\|	3
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	3
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	3
Footrest insecure \|6.2.1a\|	3
Drive chain worn to excess \|6.2.1e\|	3
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))	2
Rear Shock absorber has negligible damping effect (5.3.2 (b))	2
Rear Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	2
Front wheel bearings are excessively rough \|2.3.5b\|	2
Rear Floor brake test indicates a sticking brake \|3.3.C2c\|	2
Offside Rear Footrest insecure \|6.2.1a\|	2
Offside Front Direction indicators not working \|1.5.1c\|	2
Offside Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	2
Nearside Front Direction indicator not working \|1.5.1c\|	2
Front Horn not working (7.7 (a))	2
Front Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	2
Steering headbearing has excessive free play \|2.2.2\|	2
Rear Position lamp not working (4.2.1 (a))	2
Rear Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	2
Stop lamp remains on when the brake is released \|1.3.1e\|	2
Rear Brake disc\|s\| is excessively distorted \|3.2.A1m\|	2
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Brake hose damaged	2
Rear Brake disc\|s\| excessively scored \|3.2.A1l\|	2
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))	2
Rear Rear reflector on motorcycle missing \|1.4.1\|	2
Rear Stop lamp missing \|1.3.3a\|	2
Offside Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	2
Nearside Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	2
Rear Stop lamp does not emit a steady light \|1.3.1b\|	2
Nearside Rear Direction indicator not working \|1.5.1c\|	2
Front Horn not working \|1.7.3a\|	2
Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	2
Nearside Rear Direction indicators not working \|1.5.1c\|	2
Horn not loud enough to be heard by another road user \|1.7.3a\|	2
Headlamp not working on main beam (4.1.1 (a) (ii))	2
Rear suspension component cracked \|2.4.A.1a\|	2

MOT History from tests of petrol TRIUMPH DAYTONAs year 1993

Find us on Facebook