| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 44 |
| Registration plate issues | 28 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 14 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 14 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 13 |
| Horn not working |1.7.3a| | 11 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 9 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 9 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 8 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
| Nearside Rear Direction indicators not working |1.5.1c| | 6 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 6 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 6 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Riders seat insecure |6.2.1a| | 5 |
| Offside Rear Direction indicator not working |1.5.1c| | 5 |
| Drive chain excessively loose |6.2.1d| | 5 |
| Headlamp aim beam image kick up to the offside |1.6| | 4 |
| Front wheel bearings are excessively rough |2.3.5b| | 4 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
| Nearside Front Direction indicator not working |1.5.1c| | 4 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 4 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
| Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Front Direction indicator not working |1.5.1c| | 3 |
| Direction indicators not working |1.5.1c| | 3 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
| Nearside Rear Direction indicator not working |1.5.1c| | 3 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
| Rear Brake locking device insecure |3.2.A1e| | 3 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 3 |
| Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
| Throttle operating incorrectly |6.2.1f| | 3 |
| Rear Wheel spoke cracked. |4.2.1b| | 3 |
| Nearside Front Direction indicators not working |1.5.1c| | 2 |
| Rear Brake pedal cannot be applied smoothly |3.1.3d| | 2 |
| Brake hose damaged | 2 |
| Rear Direction indicator not working |1.5.1c| | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Offside Footrest insecure |6.2.1a| | 2 |
| Front Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 2 |
| Fuel pipe leaking |7.2.1a| | 2 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
| Brake hose excessively deteriorated | 2 |
| Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Nearside Direction indicator not working |1.5.1c| | 2 |
| Nearside Rear Footrest missing |6.2.1a| | 2 |
| Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 2 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Headlamp insecure |1.2.3b| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Front Throttle operating incorrectly |6.2.1f| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Front Wheel spoke excessively loose |4.2.1b| | 2 |
| Rear reflector on motorcycle missing |1.4.1| | 2 |
| Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
| Headlamp switch faulty |1.2.4| | 2 |
| Stop lamp not working |4.3.1 |a| |ii|| | 2 |
| Front Brake lever mounting cracked |3.1.2c| | 2 |
| Rear position lamp damaged and function impaired |1.1.1b| | 2 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 2 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
| Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Sidecar suspension has an insecure unit. |5.2.3a| | 1 |
| Offside Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Offside Rear Fuel tank leaking |7.2.1a| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Exhaust has part of the system missing |7.1.1a| | 1 |
| Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Brake reaction bracket insecure |3.2.A1j| | 1 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Rear Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Brake pedal is inoperative |3.1.3c| | 1 |
| Horn control not functioning. |1.7.2b| | 1 |
| Rear All position lamps not working |4.2.1 |a|| | 1 |
| Front position lamp damaged and function impaired |1.1.1b| | 1 |
| Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Drive chain excessively tight |6.2.1d| | 1 |
| Rear suspension component loose Swing arm nut. |2.4.A.1a| | 1 |
| Front Headlamp aim not tested |1.6| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Centre Rear Upper Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Nearside Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Nearside Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Nearside Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Upper Brake hose leaking fluid |3.2.B4| | 1 |
| Front Headlamp switch insecure |1.2.4| | 1 |
| Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Nearside Front Lower Brake back plate|s| insecure |3.2.A1j| | 1 |
| Nearside Front Lower Brake reaction bracket insecure |3.2.A1j| | 1 |
| Centre Rear Upper Rear reflector on motorcycle missing |1.4.1| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Nearside Rear Lower Brake pipe union leaking fluid |3.2.B4| | 1 |
| Offside Rear Lower Drive chain excessively loose |6.2.1d| | 1 |
| Nearside Front Direction indicators not working replaced bulb |1.5.1c| | 1 |
| Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
| Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Drive chain fouling another component |6.2.1d| | 1 |
| Front suspension assembly component missing |2.3.1| | 1 |
| Nearside Lower Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Drive belt guard insecure |6.2.1c| | 1 |
| Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Footrest insecure |6.2.1a| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Footrest missing both |6.2.1a| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
| Front Brake disc|s| insecure |3.2.A1g| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Front Horn is not a constant note |1.7.3c| | 1 |
| Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Nearside Front suspension assembly component cracked |2.3.1| | 1 |
| Offside Front suspension assembly component cracked |2.3.1| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Offside Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Fuel hose leaking |7.2.1a| | 1 |
| Forks insecure |2.2.2 |d| |i|| | 1 |
| Rear Brake hose fouling |3.2.B3b| | 1 |
| Fuel cap sealing washer missing |7.2.2c| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Nearside Front All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Centre Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Rear Brake pipe inadequately supported |3.2.B2b| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen too high on dip |4.1.2 |a|| | 1 |
| Plate brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Nearside Direction indicators flashing less than 60 times a minute not working |1.5.1c| | 1 |
| Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
| Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
| Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
| Offside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Nearside Front Lower Front suspension has a fracture of a load bearing member or its supporting structure. |2.3.8| | 1 |
| Offside Front Lower Front suspension has a fracture of a load bearing member or its supporting structure. |2.3.8| | 1 |
| Offside Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Brake lever insecure |3.1.2a| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Headlamp aim not tested |4.1.2 |b|| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| All position lamps not working |4.2.1 |a|| | 1 |
| Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear Brake master cylinder severely damaged |3.2.B1b| | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Front Front suspension assembly component loose |2.3.1| | 1 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Brake lever insecure |1.1.2 |e| |i|| | 1 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Rear Rear position lamp incorrect colour |1.1.2b| | 1 |
| Offside Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Headlamp at least one does not illuminate on main beam Bulb blown! |1.2.2a|ii|| | 1 |
| Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
| Rear suspension bearing has excessive free play swing arm bearing |2.4.A2a|i|| | 1 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
| Brake master cylinder leaking rear brake |1.1.10 |b| |ii|| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front Throttle operating incorrectly |6.2.1f| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Front Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
| Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Horn not working Not working when engine running (7.7 (a) (ii)) | 1 |
| Front Brake hose excessively stretched (1.1.12 (b) (ii)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Brake pedal has inadequate reserve travel (3.1.3b) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b) | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| All position lamps not working (4.2.1 (a)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Rear Stop lamp not working owner repaired at rear of workshop (4.3.1 (a) (ii)) | 1 |
| Front Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
| Exhaust mounting does not fully support the exhaust system (7.1.1.c) | 1 |
| Rear position lamp does not illuminate immediately when it is switched on (1.1.3a) | 1 |
| Rear position lamp insecure (1.1.1c) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Direction indicator adversely affected by the operation of another lamp not flashing with headlamp on (4.4.3 (b)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Footrest missing (6.2.12 (a)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |