Most common failures | No# failures |
---|
Headlamp aim out of alignment | 46 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 18 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 12 |
Registration plate issues | 12 |
Horn not working |1.7.3a| | 10 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 9 |
Riders seat insecure |6.2.1a| | 6 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 6 |
Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Fuel system component leaking |7.2.1a| | 5 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Brake hose excessively deteriorated | 3 |
Offside Front Direction indicators not working |1.5.1c| | 3 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Offside Rear Direction indicators not working |1.5.1c| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
Offside Front Footrest insecure |6.2.1a| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Nearside Lower Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 2 |
Offside Lower Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Nearside Direction indicators not working |1.5.1c| | 2 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Front Wheel spoke excessively loose |4.2.1b| | 2 |
Front Steering lock stop ineffective |2.1.3| | 2 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Centre Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Nearside Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front wheel bearings are excessively tight |2.3.5b| | 1 |
Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Footrest insecure |6.2.1a| | 1 |
Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Centre Front mudguard insecure |2.3.7| | 1 |
Brake hose which buldges |3.2.B4| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Offside Front Fuel system component leaking |7.2.1a| | 1 |
Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Nearside Fuel hose leaking |7.2.1a| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Horn missing |1.7.1| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Lower Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Wheel fixing loose |single fixing| |5.2.1 |a| |ii|| | 1 |
Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Front Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Brake performance not tested |3.3| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Rear Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Headlamp main beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Stop lamp insecure |1.3.3b| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Centre Rear Upper Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Brake component damaged and seriously reduced in strength |3.2.A1| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Front Brake locking device missing |3.2.A1e| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Nearside Front suspension assembly component cracked |2.3.1| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Nearside Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Horn control defective |1.7.2a| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Front Brake drum|s| insecure |3.2.A1g| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Fuel cap sealing washer torn |7.2.2c| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Rear Brake pedal mounting insecure |3.1.2a| | 1 |
Headlamp aim beam image kick up to the offside lhd unit fitted |1.6| | 1 |
Chain guard insecure front mounting fractured |6.2.1c| | 1 |
Nearside Front Lower Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Offside Front Lower Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Front Brake pipe union leaking fluid |3.2.B4| | 1 |
Rear Wheel spoke excessively loose All |4.2.1b| | 1 |
Nearside Upper Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Front Brake pipe inadequately supported |3.2.B2b| | 1 |
Front Brake hose excessively kinked |3.2.B3a| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear suspension component loose Top shock bolts |2.4.A.1a| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Brake pedal cannot be applied smoothly fouling on lower shocker bolt |3.1.3d| | 1 |
Direction indicators not working RELAY FAILED |1.5.1c| | 1 |
Offside Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Brake cylinder inadequately mounted (1.1.16 (c) (i)) | 1 |