| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 22 |
| Registration plate issues | 19 |
| Drive chain excessively loose |6.2.1d| | 5 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Rear position lamp insecure |1.1.1c| | 3 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Offside Rear Direction indicator not working |1.5.1c| | 2 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Horn is not continous or uniform |1.7.3c| | 2 |
| Direction indicator not working |1.5.1c| | 2 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Horn not working |1.7.3a| | 2 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Front wheel spindle loose |2.3.3a| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Drive chain excessively tight |6.2.1d| | 1 |
| Rear reflector on motorcycle missing |1.4.1| | 1 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Sidecar direction indicator not working |1.5.1c| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Rear Position lamp likely to become detached (4.2.1 (c) (ii)) | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Offside Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Rear Suspension component pin or bush excessively worn Shock absorber link rod bar (5.3.4 (a) (i)) | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Rear position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
| Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Brake performance not tested (1.2.1 (g)) | 1 |
| Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Nearside Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Offside Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Brake lever insecure |3.1.2a| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Rear All position lamps not working (4.2.1 (a)) | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock cable run wrong side |2.1.4| | 1 |
| Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |