Most common failures | No# failures |
---|
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 21 |
Parking brake: efficiency below requirements |3.7.B.7| | 13 |
Rear parking brake recording little or no effort | 12 |
Windscreen wiper does not clear the windscreen effectively | 12 |
Rear brake binding | 10 |
Headlamp aim out of alignment | 7 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
Brakes imbalanced across an axle | 6 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 5 |
Brake pipe excessively corroded | 4 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
Offside Headlamp not working on dipped beam |1.7.5a| | 3 |
Nearside Headlamp not working on main beam |1.7.5a| | 3 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 3 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Parking brake lever has no reserve travel |3.1.6b| | 3 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 3 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Brake hose excessively deteriorated | 3 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Parking brake mechanism/associated mounting prescribed area is fractured |3.1.9| | 2 |
rear parking |secondary| brakes imbalanced | 2 |
Offside Headlamp not working on main beam |1.7.5a| | 2 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Offside Rear Brake cable has wires broken and is significantly weakened |3.5.1b| | 2 |
Nearside Rear Brake cable has wires broken and is significantly weakened |3.5.1b| | 2 |
Rear brake application uneven | 2 |
Headlamp switch faulty |1.7.1| | 2 |
Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b| | 2 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Front Headlamp not working on main beam |1.7.5a| | 2 |
Nearside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 2 |
Offside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 2 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Rear Exhaust system not adequately supported |7.1.1| | 2 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 2 |
Brake pedal anti-slip provision missing |3.3.A.1b| | 1 |
All position lamps not working |1.1.A.3b| | 1 |
Direction indicators flashing less than 60 times a minute |1.4.A.2g| | 1 |
Offside Front Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Headlamp aim not tested |1.8.A.1c| | 1 |
Offside Steering rack gaiter split |2.2.D.2d| | 1 |
Offside Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Steering rack insecure |2.2.B.1a| | 1 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside Rear fog lamp not working |1.3.2b| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded tie bar |2.4.A.3| | 1 |
Hazard warning tell tale not working correctly |1.4.B.1e| | 1 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Headlamp switch insecure |1.7.1| | 1 |
Nearside Front Inner Suspension component mounting prescribed area is excessively corroded WING. |2.4.A.3| | 1 |
Offside Front Inner Suspension component mounting prescribed area is excessively corroded WING |2.4.A.3| | 1 |
Offside Rear Direction indicator not working |1.4.A.2c| | 1 |
Hazard warning lamps inoperative |1.4.B.1b| | 1 |
Nearside Rear Subframe mounting prescribed area is excessively corroded floor to sill joint |2.4.A.3| | 1 |
Nearside Seat belt anchorage prescribed area is inadequately repaired floor to sill joint |5.2.6| | 1 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
Headlamp not working on main beam |1.7.5a| | 1 |
Stop lamp not working both |1.2.1b| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Front Brake hose bulging under pressure |3.6.B.3| | 1 |
Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Steering column universal joint has excessive play |2.1.5| | 1 |
Front Brake pipe leaking |3.6.A.1| | 1 |
Offside Rear Braking system leaking |3.6.A.1| | 1 |
Offside Rear Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 1 |
Fuel hose leaking |7.2.3| | 1 |
Fuel tank leaking |7.2.3| | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing |5.3.6 |a| |i|| | 1 |
Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 1 |
Parking |secondary brake| on a single line braking system imbalanced across an axle Axle 1 |1.3.1 |b| |i|| | 1 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Offside Front Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Offside Stop lamp excessively damaged so that it is not visible from a reasonable distance |1.2.1d| | 1 |
Offside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
Nearside Rear Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Rear Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Nearside Front Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
Offside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Front brake application uneven | 1 |
Nearside Steering rack insecure |2.2.B.1a| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Nearside Rear Brake clevis joint has restricted free movement |3.5.1k| | 1 |
Nearside Front Steering arm has relative movement at its fixings |2.2.B.1h| | 1 |
Offside Front Steering arm has relative movement at its fixings |2.2.B.1h| | 1 |
Battery insecure |1.9.1| | 1 |
Stop lamp not working |1.2.1b| | 1 |
Offside Side repeater not working |1.4.A.2c| | 1 |
Centre Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Nearside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Steering system excessively tight |2.2.D.1| | 1 |
Offside Front Service brake is causing the vehicle to swerve to the nearside |3.7.C.2| | 1 |
Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Service brake: efficiency below requirements |3.7.C.1a| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Steering column top mounting bracket insecure |2.1.2d| | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Front Headlamp not working on main beam |1.7.5a| | 1 |
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 1 |
Nearside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Inner Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Registration plate lamp issues | 1 |
Registration plate issues | 1 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Front Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Parking brake lever defective so that it cannot be satisfactorily operated |3.1.3c| | 1 |
rear brakes release unevenly |3.7.B.4| | 1 |