Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 8 |
Offside Stop lamp not working |1.2.1b| | 2 |
Nearside Stop lamp not working |1.2.1b| | 2 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 2 |
Nearside Front Direction indicators incorrect colour |1.4.A.2f| | 1 |
Offside Rear Direction indicators incorrect colour |1.4.A.2f| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill at rear holed and corroded - jacking point area (5.3.6 (a) (i)) | 1 |
Seat belt anchorage prescribed area strength or continuity significantly reduced o/s inner sill holed and corroded front/centre (7.1.1 (a) (i)) | 1 |
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Offside Body insecure and dangerous to other road users side skirt insecure |6.1.B.1b| | 1 |
Nearside Front Windscreen wiper blade missing |8.2.2| | 1 |
Nearside Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c| | 1 |
Headlamp aim out of alignment | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Nearside Position lamp not working (4.2.1 (a) (ii)) | 1 |
Horn not working (7.7 (a)) | 1 |
Speedometer clearly inoperative (7.8 (b) (ii)) | 1 |
Nearside Front Coil spring not correctly located |2.4.C.2| | 1 |
Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill (5.3.6 (a) (ii)) | 1 |
Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill (5.3.6 (a) (ii)) | 1 |
Stop lamp not working |1.2.1b| | 1 |
Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
Parking brake lever has excessive movement indicating incorrect adjustment |1.1.6 |c|| | 1 |
Brake load sensing valve seized but ABS functioning |1.1.17 |c| |i|| | 1 |
Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Nearside Headlamp levelling device inoperative (4.1.5 (a)) | 1 |
Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
Offside Rear Suspension spring mounting prescribed area is inadequately repaired front & rear mounts |2.4.A.3| | 1 |
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis outrigger (6.1.1 (c) (ii)) | 1 |
Fluid leak harmful to the environment or a risk to other road users fuel filler pipe coroded (8.4.1 (a) (i)) | 1 |
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering behind strut (6.1.1 (c) (ii)) | 1 |
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering crossmember. (6.1.1 (c) (ii)) | 1 |
Offside Headlamp insecure (4.1.1 (c)) | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Rear brake binding | 1 |
Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Brakes imbalanced across an axle | 1 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Fuel system component leaking fuel filer neck pipe (6.1.3 (b) (i)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |