Most common failures | No# failures |
---|
Headlamp aim out of alignment | 7 |
Brake pipe excessively corroded | 6 |
Windscreen wiper does not clear the windscreen effectively | 5 |
Nearside Stop lamp not working |1.2.1b| | 4 |
Offside Stop lamp not working |1.2.1b| | 4 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 4 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 4 |
Offside Headlamp aim beam image kick up to the offside |1.8| | 4 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Service brake: efficiency below requirements |3.7.B.7| | 3 |
Parking brake: efficiency below requirements |3.7.B.7| | 3 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Brakes imbalanced across an axle | 3 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Registration plate lamp issues | 3 |
Registration plate issues | 2 |
Offside Rear fog lamp missing (4.5.1 (a) (ii)) | 2 |
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 2 |
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 2 |
Nearside Rear Seat belt missing (7.1.2 (a)) | 2 |
Offside Rear Seat belt missing (7.1.2 (a)) | 2 |
Nearside Side repeater missing |1.4.A.2b| | 2 |
Offside Side repeater missing |1.4.A.2b| | 2 |
Nearside Rear Statutory seat belt missing |5.1.1| | 2 |
Offside Rear Statutory seat belt missing |5.1.1| | 2 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Steering column top bearing excessively worn |2.1.2c| | 2 |
Rear fog lamp obviously incorrectly positioned |1.3.2a| | 2 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 2 |
Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b)) | 1 |
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 1 |
Nearside Side repeater missing (4.4.1 (a) (ii)) | 1 |
Offside Side repeater missing (4.4.1 (a) (ii)) | 1 |
Windscreen wiper not working (3.4 (a)) | 1 |
Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
Nearside Front Integral body structure is fractured and structural rigidity is significantly reduced subframe mount (6.1.1 (a) (i)) | 1 |
Offside Rear Integral body structure is fractured and structural rigidity is significantly reduced subframe mounting (6.1.1 (a) (i)) | 1 |
Offside Integral body structure is fractured and structural rigidity is significantly reduced inner sill middle and front (6.1.1 (a) (i)) | 1 |
Offside Front Integral body structure is fractured and structural rigidity is significantly reduced subframe mounting (6.1.1 (a) (i)) | 1 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner arch (6.2.2 (d) (i)) | 1 |
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Boot floor (6.2.2 (d) (i)) | 1 |
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Boot floor (6.2.2 (d) (i)) | 1 |
Brake performance not tested Due to coolant loss (1.2.1 (g)) | 1 |
Emissions not tested Due to coolant loss (8.2.1.2 (d)) | 1 |
Rear Rear fog lamp obviously incorrectly positioned |1.3.2a| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Brake performance not tested |3.7.A.1| | 1 |
Emissions not tested |7.0| | 1 |
Braking system leaking |3.6.A.1| | 1 |
Centre Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Windscreen washer not working | 1 |
Nearside Front Position lamp not working |4.2.1 |a|| | 1 |
Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Front Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Rear Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Offside Rear Service brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
Nearside Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
Offside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Nearside Side repeater not working |1.4.A.2c| | 1 |
Headlamp not working on main beam |1.7.5a| | 1 |
Offside Front Seat belt anchorage prescribed area is severely distorted |5.2.6| | 1 |
Offside Rear Braking system leaking |3.6.A.1| | 1 |
Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Rear Rear fog lamp missing |1.3.2a| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Rear fog lamp not working |1.3.2b| | 1 |
Hazard warning switch faulty |1.4.B.1d| | 1 |
Centre Steering rack gaiter insecure |2.2.D.2d| | 1 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Rear brake application uneven | 1 |
Rear Stop lamp not working |1.2.1b| | 1 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Central Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded floor holed |5.2.6| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded floor holed |5.2.6| | 1 |
Nearside Front Seat belt anchorage prescribed area is severely distorted inner sill |5.2.6| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Nearside Front Side repeater missing |1.4.A.2b| | 1 |
Offside Front Side repeater missing |1.4.A.2b| | 1 |
Offside Rear Road wheel bead rim badly distorted |4.2.A.1a| | 1 |
Nearside Side repeater incorrect colour |1.4.A.2f| | 1 |
Front Electrical wiring insecure |1.9.2a| | 1 |
Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Centre Steering rack gaiter split |2.2.D.2d| | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) | 1 |
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |