MOT History from tests of petrol TOYOTA PRIUSs year 2001

Review the list of common TOYOTA PRIUS failures below or to perform a specific mot history check on your TOYOTA then use our popular KnowYourCar service

mot history

Pass percent:75.61%

(The average a petrol TOYOTA PRIUS year 2001 passes without issue)

Based on:2,066 MOT Tests

Most common failures	No# failures
Windscreen wiper does not clear the windscreen effectively	129
Headlamp aim out of alignment	73
Rear brake binding	68
Registration plate lamp issues	68
Parking brake: efficiency below requirements \|3.7.B.7\|	45
Registration plate issues	34
Rear parking brake recording little or no effort	28
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	18
Brake pipe excessively corroded	18
Rear brake disc in such a condition that it is seriously weakened	16
Offside Front brake disc excessively pitted \|3.5.1h\|	15
Nearside Front brake disc excessively pitted \|3.5.1h\|	14
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	13
Exhaust has a major leak of exhaust gases \|7.1.2\|	12
Front brake disc in such a condition that it is seriously weakened	12
Rear Mechanical brake component has restricted free movement	9
Windscreen has damage	8
Offside Stop lamp not working \|1.2.1b\|	8
Front brake disc excessively pitted \|3.5.1h\|	7
Service brake: efficiency below requirements \|3.7.B.7\|	7
Brakes imbalanced across an axle	7
Offside Rear brake disc excessively pitted \|3.5.1h\|	7
Rear Exhaust has a major leak of exhaust gases \|7.1.2\|	6
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))	5
Parking brake efficiency below requirements (1.4.2 (a) (i))	5
Parking brake lever has no reserve travel \|3.1.6b\|	5
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt \|2.4.G.2\|	5
Nearside Rear brake disc excessively pitted \|3.5.1h\|	5
Nearside Stop lamp not working \|1.2.1b\|	5
Nearside Front Shock absorber has a serious fluid leak \|2.7.3\|	5
Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt \|2.4.G.2\|	4
Rear brake disc excessively pitted \|3.5.1h\|	4
Rear Exhaust has a part missing \|7.1.1a\|	4
Offside Front Front position lamp\|s\| not working \|1.1.A.3b\|	4
Rear Exhaust system not adequately supported \|7.1.1\|	4
Engine MIL inoperative or indicates a malfunction \|8.2.1.2 \|h\|\|	4
Nearside Front Position lamp not working \|4.2.1 \|a\|\|	3
Offside Rear wheel bearing rough when rotated \|2.6.1\|	3
Offside Rear Shock absorber has a serious fluid leak \|2.7.3\|	3
Nearside Headlamp aim beam image obviously incorrect \|1.8.A.1b\|	3
Nearside Rear Body has a sharp edge caused by damage \|6.1.C.1\|	3
Offside Rear Body has a sharp edge caused by damage \|6.1.C.1\|	3
Horn not working \|1.6.2a\|	3
Offside Front Position lamp not working (4.2.1 (a) (ii))	3
brake disc excessively pitted \|3.5.1h\|	3
Offside Front front brake binding \|3.7.B.1\|	3
Centre Exhaust has a major leak of exhaust gases \|7.1.2\|	3
Nearside Front Front position lamp\|s\| not working \|1.1.A.3b\|	3
Exhaust has part of the system excessively deteriorated \|7.1.1a\|	3
Exhaust system not adequately supported \|7.1.1\|	3
Nearside Front Position lamp not working (4.2.1 (a) (ii))	3
Offside Front Shock absorber has a serious fluid leak \|2.7.3\|	3
Nearside Rear Shock absorber has a serious fluid leak \|2.7.3\|	2
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))	2
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))	2
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))	2
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))	2
Nearside Rear Rear wheel bearing rough when rotated \|2.6.1\|	2
Nearside Rear wheel bearing rough when rotated \|2.6.1\|	2
Brake performance not tested \|3.7.A.1\|	2
Nearside Front constant velocity joint gaiter insecurely mounted to its housing \|2.5.C.1a\|	2
Offside Obligatory mirror seriously damaged, affecting the rear view \|8.1.2a\|	2
Offside Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	2
Rear fog lamp not working \|1.3.2b\|	2
Offside Parking brake inoperative on one side \|1.4.1 \|a\|\|	2
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))	2
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))	2
Nearside Rear Braking system leaking \|3.6.A.1\|	2
Nearside Front front brake binding \|3.7.B.1\|	2
Nearside Front Headlamp not working on dipped beam \|1.7.5a\|	2
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))	2
Offside Rear Brake back plate\|s\| securing device excessively deteriorated \|3.5.1j\|	2
Anti-lock braking system warning lamp indicates an ABS fault	2
Offside Rear fog lamp not working \|1.3.2b\|	2
Offside Rear brake disc has restricted free movement \|3.5.1j\|	2
Nearside Rear position lamp\|s\| incorrect colour \|1.1.A.3e\|	2
Nearside Stop lamp emits other than a steady red light \|1.2.1e\|	2
Parking brake efficiency less than 50% of the required value \|1.4.2 \|a\| \|ii\|\|	2
Nearside rear brake grabbing severely \|3.7.A.5b\|	2
Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))	2
Nearside Rear Stop lamp not working \|1.2.1b\|	2
Offside Front Seat belt stitching badly frayed \|5.2.2b\|	2
Offside Headlamp has a product on the lens so that the light output is severely reduced \|1.7.5a\|	2
Offside Headlamp not working on dipped beam \|1.7.5a\|	2
Offside Rear Brake pipe leaking \|3.6.A.1\|	2
Offside Front Position lamp not working \|4.2.1 \|a\|\|	2
Offside Rear Brake cable has restricted free movement \|1.1.15 \|e\|\|	2
Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))	2
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))	2
Offside Headlamp aim beam image obviously incorrect \|1.8.A.1b\|	2
Offside Inner Front brake disc excessively pitted \|3.5.1h\|	2
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))	2
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))	2
Nearside Rear Wheel bearing rough when rotated \|5.1.3 \|b\| \|i\|\|	2
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	2
Nearside Front coil spring broken \|2.4.C.1a\|	2
Offside Front Lower Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt \|2.4.G.2\|	2
Nearside Front Lower Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt \|2.4.G.2\|	2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Windscreen wiper does not clear the windscreen effectively	129
Headlamp aim out of alignment	73
Rear brake binding	68
Registration plate lamp issues	68
Parking brake: efficiency below requirements \|3.7.B.7\|	45
Registration plate issues	34
Rear parking brake recording little or no effort	28
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	18
Brake pipe excessively corroded	18
Rear brake disc in such a condition that it is seriously weakened	16
Offside Front brake disc excessively pitted \|3.5.1h\|	15
Nearside Front brake disc excessively pitted \|3.5.1h\|	14
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	13
Exhaust has a major leak of exhaust gases \|7.1.2\|	12
Front brake disc in such a condition that it is seriously weakened	12
Rear Mechanical brake component has restricted free movement	9
Windscreen has damage	8
Offside Stop lamp not working \|1.2.1b\|	8
Front brake disc excessively pitted \|3.5.1h\|	7
Service brake: efficiency below requirements \|3.7.B.7\|	7
Brakes imbalanced across an axle	7
Offside Rear brake disc excessively pitted \|3.5.1h\|	7
Rear Exhaust has a major leak of exhaust gases \|7.1.2\|	6
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))	5
Parking brake efficiency below requirements (1.4.2 (a) (i))	5
Parking brake lever has no reserve travel \|3.1.6b\|	5
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt \|2.4.G.2\|	5
Nearside Rear brake disc excessively pitted \|3.5.1h\|	5
Nearside Stop lamp not working \|1.2.1b\|	5
Nearside Front Shock absorber has a serious fluid leak \|2.7.3\|	5
Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt \|2.4.G.2\|	4
Rear brake disc excessively pitted \|3.5.1h\|	4
Rear Exhaust has a part missing \|7.1.1a\|	4
Offside Front Front position lamp\|s\| not working \|1.1.A.3b\|	4
Rear Exhaust system not adequately supported \|7.1.1\|	4
Engine MIL inoperative or indicates a malfunction \|8.2.1.2 \|h\|\|	4
Nearside Front Position lamp not working \|4.2.1 \|a\|\|	3
Offside Rear wheel bearing rough when rotated \|2.6.1\|	3
Offside Rear Shock absorber has a serious fluid leak \|2.7.3\|	3
Nearside Headlamp aim beam image obviously incorrect \|1.8.A.1b\|	3
Nearside Rear Body has a sharp edge caused by damage \|6.1.C.1\|	3
Offside Rear Body has a sharp edge caused by damage \|6.1.C.1\|	3
Horn not working \|1.6.2a\|	3
Offside Front Position lamp not working (4.2.1 (a) (ii))	3
brake disc excessively pitted \|3.5.1h\|	3
Offside Front front brake binding \|3.7.B.1\|	3
Centre Exhaust has a major leak of exhaust gases \|7.1.2\|	3
Nearside Front Front position lamp\|s\| not working \|1.1.A.3b\|	3
Exhaust has part of the system excessively deteriorated \|7.1.1a\|	3
Exhaust system not adequately supported \|7.1.1\|	3
Nearside Front Position lamp not working (4.2.1 (a) (ii))	3
Offside Front Shock absorber has a serious fluid leak \|2.7.3\|	3
Nearside Rear Shock absorber has a serious fluid leak \|2.7.3\|	2
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))	2
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))	2
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))	2
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))	2
Nearside Rear Rear wheel bearing rough when rotated \|2.6.1\|	2
Nearside Rear wheel bearing rough when rotated \|2.6.1\|	2
Brake performance not tested \|3.7.A.1\|	2
Nearside Front constant velocity joint gaiter insecurely mounted to its housing \|2.5.C.1a\|	2
Offside Obligatory mirror seriously damaged, affecting the rear view \|8.1.2a\|	2
Offside Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	2
Rear fog lamp not working \|1.3.2b\|	2
Offside Parking brake inoperative on one side \|1.4.1 \|a\|\|	2
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))	2
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))	2
Nearside Rear Braking system leaking \|3.6.A.1\|	2
Nearside Front front brake binding \|3.7.B.1\|	2
Nearside Front Headlamp not working on dipped beam \|1.7.5a\|	2
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))	2
Offside Rear Brake back plate\|s\| securing device excessively deteriorated \|3.5.1j\|	2
Anti-lock braking system warning lamp indicates an ABS fault	2
Offside Rear fog lamp not working \|1.3.2b\|	2
Offside Rear brake disc has restricted free movement \|3.5.1j\|	2
Nearside Rear position lamp\|s\| incorrect colour \|1.1.A.3e\|	2
Nearside Stop lamp emits other than a steady red light \|1.2.1e\|	2
Parking brake efficiency less than 50% of the required value \|1.4.2 \|a\| \|ii\|\|	2
Nearside rear brake grabbing severely \|3.7.A.5b\|	2
Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))	2
Nearside Rear Stop lamp not working \|1.2.1b\|	2
Offside Front Seat belt stitching badly frayed \|5.2.2b\|	2
Offside Headlamp has a product on the lens so that the light output is severely reduced \|1.7.5a\|	2
Offside Headlamp not working on dipped beam \|1.7.5a\|	2
Offside Rear Brake pipe leaking \|3.6.A.1\|	2
Offside Front Position lamp not working \|4.2.1 \|a\|\|	2
Offside Rear Brake cable has restricted free movement \|1.1.15 \|e\|\|	2
Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))	2
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))	2
Offside Headlamp aim beam image obviously incorrect \|1.8.A.1b\|	2
Offside Inner Front brake disc excessively pitted \|3.5.1h\|	2
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))	2
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))	2
Nearside Rear Wheel bearing rough when rotated \|5.1.3 \|b\| \|i\|\|	2
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	2
Nearside Front coil spring broken \|2.4.C.1a\|	2
Offside Front Lower Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt \|2.4.G.2\|	2
Nearside Front Lower Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt \|2.4.G.2\|	2

MOT History from tests of petrol TOYOTA PRIUSs year 2001

Find us on Facebook