Most common failures | No# failures |
---|
Brake hose excessively deteriorated | 7 |
Headlamp aim out of alignment | 7 |
Windscreen wiper does not clear the windscreen effectively | 6 |
Registration plate lamp issues | 5 |
Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 5 |
Brakes imbalanced across an axle | 3 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Nearside Side repeater not working |1.4.A.2c| | 2 |
Offside Rear fog lamp not working |1.3.2b| | 2 |
Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 2 |
Registration plate issues | 2 |
Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 1 |
Central Stop lamp(s) with a multiple light source more than 1/2 not functioning (4.3.1 (a) (ii)) | 1 |
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Rear Rear fog lamp not working |1.3.2b| | 1 |
Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Front Wheel nut|s| loose |4.2.A.1e| | 1 |
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b)) | 1 |
Rear parking brake recording little or no effort | 1 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Driver`s seat insecure |6.2.A.1| | 1 |
Exhaust emits an excessive level of metered smoke for a non-turbo charged engine |7.4.B.3b| | 1 |
Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Offside Front Shock absorbers has a serious fluid leak | 1 |
Headlamp aim aimed so that it dazzles other road users Both Front |1.8.A.1a| | 1 |
Offside Rear Parking brake inoperative on one side |1.4.1 |a|| | 1 |
Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
Exhaust emits excessive smoke or vapour of any colour |7.4.B.4| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Battery insecure |1.9.1| | 1 |
Nearside Front Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Offside Rear Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Exhaust system not adequately supported |7.1.1| | 1 |
Offside Side repeater not working |1.4.A.2c| | 1 |
Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Rear Seat belt affected by an insecure seat fixing |5.2.1b| | 1 |
Nearside Side repeater incorrect colour |1.4.A.2f| | 1 |
Offside Side repeater incorrect colour |1.4.A.2f| | 1 |
Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 1 |
Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Brake hydraulic reservoir cap missing |3.6.G.1a| | 1 |
Offside Front Shock absorber has negligible damping effect |2.7.5| | 1 |
Offside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch holed (5.3.6 (a) (i)) | 1 |
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis holed (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring moutain holed (5.3.6 (a) (i)) | 1 |
Emissions not tested center exhaust leaking (8.2.1.2 (d)) | 1 |
Nearside Rear Inner Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Central Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction items in drivers view (3.1 (a) (ii)) | 1 |
Front Suspension component mounting prescribed area is inadequately repaired plates not welded all way round (5.3.6 (a) (i)) | 1 |
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h)) | 1 |
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength trailing arm mount holed (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength coil spring mount cross member holed 3 holes (5.3.6 (a) (i)) | 1 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Rear Suspension component corroded and seriously weakened Outer rigger, marked (5.3.3 (b) (i)) | 1 |
Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 1 |
Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii)) | 1 |
Rear Rear fog lamp excessively deteriorated so that it is not visible from a reasonable distance |1.3.2d| | 1 |
Rear Prop shaft bearing likely to break up Front joint (6.1.7 (b) (ii)) | 1 |