Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 12 |
Brake pipe excessively corroded | 8 |
Brakes imbalanced across an axle | 6 |
Headlamp aim out of alignment | 4 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 3 |
Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Horn not working |1.6.2a| | 3 |
Front brake application uneven | 3 |
Rear brake application uneven | 3 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 2 |
Offside Front Shock absorber has a serious fluid leak |2.7.3| | 2 |
Registration plate issues | 2 |
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded wheelarch |2.4.A.3| | 1 |
Offside Front Inner Seat belt anchorage prescribed area is excessively corroded floorpan by seat mount |5.2.6| | 1 |
Nearside Front Outer Suspension component mounting prescribed area is excessively corroded wheelarch |2.4.A.3| | 1 |
Offside Front Outer Suspension component mounting prescribed area is excessively corroded wheelarch |2.4.A.3| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Nearside front brake recording little or no effort |3.7.B.5a| | 1 |
Offside Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen |3.5 |a|| | 1 |
Nearside Obligatory mirror insecure |3.3 |b| |ii|| | 1 |
Front Service brake lagging in operation |1.2.1 |d|| | 1 |
Service brake lagging in operation |1.2.1 |d|| | 1 |
Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b)) | 1 |
Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Offside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Nearside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear wheel bearing rough when rotated |2.6.1| | 1 |
Nearside Front Shock absorber has negligible damping effect |2.7.5| | 1 |
Offside Front Shock absorber has negligible damping effect |2.7.5| | 1 |
Nearside Lower Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Offside Lower Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Steering system excessively tight |2.2.D.1| | 1 |
Front front brake grabbing severely |3.7.A.2b| | 1 |
Offside Lower Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Rear Lower Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Nearside front brake grabbing severely |3.7.A.2b| | 1 |
Offside front brake grabbing severely |3.7.A.2b| | 1 |
Nearside rear brake grabbing severely |3.7.A.5b| | 1 |
Offside rear brake grabbing severely |3.7.A.5b| | 1 |
Offside Rear fog lamp missing |1.3.2a| | 1 |
Rear fog lamp switch missing |1.3.1a| | 1 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Exhaust mounting missing |7.1.1b| | 1 |
Offside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Offside Front front brake binding |3.7.B.1| | 1 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded wheelarch |2.4.A.3| | 1 |
Registration plate lamp issues | 1 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Centre Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Front Anti-roll bar linkage damaged and seriously weakened |2.4.G.1| | 1 |
Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Nearside Steering pivot point has excessive play |2.2.B.1g| | 1 |
Offside Steering pivot point has excessive play |2.2.B.1g| | 1 |
Offside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Nearside Front Body has a sharp edge caused by corrosion door panel [skin] |6.1.C.1| | 1 |
Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings upper step panel 30cm within steering component mounting |6.1.B.2| | 1 |
Exhaust system not adequately supported |7.1.1| | 1 |
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Centre Exhaust system not adequately supported |7.1.1| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |