>

MOT History from tests of petrol TOYOTA COROLLAs year 1984

Review the list of common TOYOTA COROLLA failures below or to perform a specific mot history check on your TOYOTA then use our popular KnowYourCar service

mot history
Pass percent:63.57%
(The average a petrol TOYOTA COROLLA year 1984 passes without issue)
Based on:1,131 MOT Tests
Most common failuresNo# failures
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|45
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|44
Registration plate lamp issues39
Windscreen wiper does not clear the windscreen effectively38
Headlamp aim out of alignment37
Brake hose excessively deteriorated34
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6|32
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6|31
Brake pipe excessively corroded29
Horn not working |1.6.2a|25
Parking brake: efficiency below requirements |3.7.B.7|23
Registration plate issues16
Offside Stop lamp not working |1.2.1b|14
Rear Exhaust has a major leak of exhaust gases |7.1.2|14
Offside Rear fog lamp not working |1.3.2b|12
Rear parking brake recording little or no effort11
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6|11
Nearside Stop lamp not working |1.2.1b|11
Rear brake binding11
Brakes imbalanced across an axle10
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6|10
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|10
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|9
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|9
Offside Front Front constant velocity joint gaiter split |2.5.C.1a|9
Nearside Front position lamp|s| not working |1.1.A.3b|9
Nearside Rear Shock absorber has a serious fluid leak |2.7.3|9
Exhaust emissions carbon monoxide content excessive |7.3.B.1a|9
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6|8
Nearside Steering rack gaiter split |2.2.D.2d|8
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a|7
Rear fog lamp tell tale not working |1.3.1b|7
Centre Exhaust has a major leak of exhaust gases |7.1.2|7
Offside Rear Stop lamp not working |1.2.1b|7
Exhaust emissions hydrocarbon content excessive |7.3.B.1b|6
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1|6
Offside Front position lamp|s| not working |1.1.A.3b|6
Offside Front constant velocity joint gaiter split |2.5.C.1a|6
Nearside Front constant velocity joint gaiter split |2.5.C.1a|6
Front Exhaust has a major leak of exhaust gases |7.1.2|6
Offside Rear Shock absorber has a serious fluid leak |2.7.3|6
Offside Steering rack gaiter split |2.2.D.2d|6
Rear fog lamp not working |1.3.2b|6
Offside Outer Front constant velocity joint gaiter split |2.5.C.1a|6
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|5
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|5
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|5
Rear brake application uneven5
Rear fog lamp tell tale missing |1.3.1b|5
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|5
Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6|5
Nearside Front Shock absorber has negligible damping effect |2.7.5|4
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3|4
Exhaust has a major leak of exhaust gases |7.1.2|4
Offside Rear rear brake recording little or no effort |3.7.B.5a|4
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b|4
Exhaust engine idle speed too high |7.3.A.2a|4
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4|4
Rear fog lamp missing |1.3.2a|4
Offside Front Headlamp not working on dipped beam |1.7.5a|4
Nearside Inner Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6|4
Offside Windscreen wiper blade deteriorated |8.2.2|4
Nearside Windscreen wiper blade deteriorated |8.2.2|4
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|4
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|4
Nearside Front Front wheel bearing has excessive play |2.5.A.3c|3
Offside Side repeater not working |1.4.A.2c|3
Service brake: efficiency below requirements |3.7.B.7|3
Battery insecure |1.9.1|3
Nearside Front position lamp|s| incorrect colour |1.1.A.3e|3
Offside Front position lamp|s| incorrect colour |1.1.A.3e|3
Offside Rear Rear fog lamp not working |1.3.2b|3
Rear fog lamp switch missing |1.3.1a|3
Nearside Headlamp not working on main beam |1.7.5a|3
Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b|3
Offside Headlamp not working on dipped beam |1.7.5a|3
Nearside Front wheel bearing has excessive play |2.5.A.3c|3
Offside Front wheel bearing has excessive play |2.5.A.3c|3
Offside Rear brake disc excessively pitted |3.5.1h|3
Brake pedal anti-slip provision missing |3.3.A.1b|3
Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2|3
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a|3
Offside Front Front position lamp|s| not working |1.1.A.3b|3
Offside Front Shock absorber has negligible damping effect |2.7.5|3
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3|3
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3|3
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3|3
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1|3
Offside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6|3
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a|3
Nearside Front Steering rack gaiter split |2.2.D.2d|3
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|3
Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a|3
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|3
Centre Exhaust has part of the system excessively deteriorated |7.1.1a|3
Nearside Rear Stop lamp not working |1.2.1b|3
Nearside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3|2
rear brake recording little or no effort |3.7.B.5a|2
Offside Front Front constant velocity joint is insecure |2.5.C.1b|2
Offside Front Direction indicator not working |1.4.A.2c|2
Offside Front Front wheel bearing has excessive play |2.5.A.3c|2
Driver`s seat insecure |6.2.A.1|2
Nearside Front front brake binding |3.7.B.1|2
Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b|2
Offside Track rod end ball joint has excessive play |2.2.B.1f|2
Emissions not tested |7.0|2
Offside Rear fog lamp missing |1.3.2a|2
All position lamps not working |1.1.A.3b|2
Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f|2
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
rear brakes release unevenly |3.7.B.4|2
Rear Exhaust system not adequately supported |7.1.1|2
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3|2
Nearside Front Shock absorber has a serious fluid leak |2.7.3|2
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1|2
Brake hose damaged2
Offside Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6|2
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3|2
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6|2
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6|2
Nearside Front Headlamp not working on dipped beam |1.7.5a|2
Nearside Rear Rear position lamp|s| not working |1.1.A.3b|2
Nearside Front wheel bearing rough when rotated |2.5.A.2|2
Brake pedal has insufficient reserve movement |3.3.A.5|2
Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2|2
Brake hose has insufficient room to move2
Rear Rear fog lamp not working |1.3.2b|2
Offside Front wheel bearing rough when rotated |2.5.A.2|2
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a|2
Nearside Front Windscreen wiper blade deteriorated |8.2.2|2
Stop lamp remains on when the brakes are released2
Nearside Front brake disc excessively pitted |3.5.1h|2
Offside Front brake disc excessively pitted |3.5.1h|2
Parking brake lever pawl spring does not push the pawl positively into the ratchet teeth |3.1.5|2
Offside rear brake recording little or no effort |3.7.B.5a|2
Nearside Headlamp not working on dipped beam |1.7.5a|2
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|2
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3|2
Offside Front Windscreen wiper blade deteriorated |8.2.2|2
Windscreen has damage2
Rear Exhaust has part of the system excessively deteriorated |7.1.1a|2
Offside Front Track rod end ball joint has excessive play |2.2.B.1f|2
Nearside Rear brake disc excessively pitted |3.5.1h|2
Nearside rear brake recording little or no effort |3.7.B.5a|2
Nearside Rear position lamp|s| not working |1.1.A.3b|2
Offside Rear position lamp|s| not working |1.1.A.3b|2
Suspension component mounting prescribed area is excessively corroded |2.4.A.3|2
Offside Rear Stop lamp adversely affected by the operation of another lamp |1.2.1f|2
Nearside Headlamp insecure |1.7.3|2
Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|2
Offside Front Shock absorber has a serious fluid leak |2.7.3|2
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6|2
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Nearside Front Front position lamp|s| not working |1.1.A.3b|2
Fuel system component leaking |7.2.3|2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy