Most common failures | No# failures |
---|
Brake pipe excessively corroded | 1368 |
Registration plate lamp issues | 1111 |
Headlamp aim out of alignment | 843 |
Windscreen wiper does not clear the windscreen effectively | 843 |
Parking brake: efficiency below requirements |3.7.B.7| | 393 |
Offside Stop lamp not working |1.2.1b| | 315 |
Nearside Stop lamp not working |1.2.1b| | 299 |
Rear parking brake recording little or no effort | 263 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 258 |
Exhaust has a major leak of exhaust gases |7.1.2| | 255 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 253 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 249 |
Offside Front position lamp|s| not working |1.1.A.3b| | 237 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 234 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 234 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 218 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 200 |
Nearside Steering rack gaiter split |2.2.D.2d| | 191 |
Brakes imbalanced across an axle | 190 |
Rear brake binding | 181 |
Registration plate issues | 173 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 160 |
Offside Rear Stop lamp not working |1.2.1b| | 147 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 146 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 140 |
Offside Steering rack gaiter split |2.2.D.2d| | 132 |
Nearside Rear Stop lamp not working |1.2.1b| | 130 |
Offside Rear Shock absorber has negligible damping effect |2.7.5| | 124 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 124 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 120 |
Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 116 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 114 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 104 |
Nearside Rear Shock absorber has negligible damping effect |2.7.5| | 103 |
Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 97 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 94 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 91 |
Service brake: efficiency below requirements |3.7.B.7| | 91 |
Rear brake application uneven | 86 |
Windscreen wiper blade insecure | 85 |
Windscreen has damage | 78 |
Offside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 76 |
Parking brake lever has no reserve travel |3.1.6b| | 76 |
Nearside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 68 |
Offside Rear fog lamp not working |1.3.2b| | 65 |
Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 65 |
Emissions not tested |7.0| | 63 |
Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 60 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 59 |
Offside Windscreen wiper blade deteriorated |8.2.2| | 57 |
Offside rear brake recording little or no effort |3.7.B.5a| | 56 |
Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 55 |
Offside Front Windscreen wiper blade deteriorated |8.2.2| | 54 |
Offside Headlamp not working on dipped beam |1.7.5a| | 54 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 52 |
Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 49 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 48 |
Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 47 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 45 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 45 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 43 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 39 |
Front brake application uneven | 39 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 38 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 37 |
Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 37 |
Stop lamp not working |1.2.1b| | 35 |
Centre Exhaust has part of the system excessively deteriorated |7.1.1a| | 34 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 34 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 33 |
Rear Exhaust system not adequately supported |7.1.1| | 32 |
Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 30 |
Exhaust has part of the system excessively deteriorated |7.1.1a| | 30 |
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 30 |
Rear Mechanical brake component has restricted free movement | 29 |
Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 29 |
Offside Rear Rear fog lamp not working |1.3.2b| | 27 |
Rear Stop lamp not working |1.2.1b| | 27 |
Front brake disc in such a condition that it is seriously weakened | 27 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 27 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 27 |
Horn not working |1.6.2a| | 26 |
Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 26 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 24 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 24 |
Offside Front Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 24 |
Nearside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 23 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 23 |
Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 22 |
Nearside Front Direction indicator incomplete |1.5.A1b| | 22 |
Nearside Front wheel bearing has excessive play |2.5.A.3c| | 22 |
Front Exhaust has part of the system excessively deteriorated |7.1.1a| | 22 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 22 |
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 21 |
Nearside Side repeater not working |1.4.A.2c| | 21 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 20 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 20 |
Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 20 |
Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 20 |
Exhaust engine idle speed too high |7.3.A.2a| | 20 |
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 20 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 20 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 19 |
Brake pedal anti-slip provision missing |3.3.A.1b| | 19 |
Nearside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 19 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 19 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 19 |
Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 18 |
Front position lamp|s| not working |1.1.A.3b| | 18 |
Battery insecure |1.9.1| | 18 |
Nearside Rear Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 18 |
Fuel tank leaking |7.2.3| | 18 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 17 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 17 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 17 |