Most common failures | No# failures |
---|
Brake pipe excessively corroded | 134 |
Headlamp aim out of alignment | 88 |
Windscreen wiper does not clear the windscreen effectively | 71 |
Brake hose excessively deteriorated | 61 |
Registration plate lamp issues | 57 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 54 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 53 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 52 |
Parking brake: efficiency below requirements |3.7.B.7| | 41 |
Registration plate issues | 36 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 33 |
Offside Steering rack gaiter split |2.2.D.2d| | 33 |
Exhaust has a major leak of exhaust gases |7.1.2| | 31 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 30 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 28 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 28 |
Nearside Stop lamp not working |1.2.1b| | 27 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 27 |
Rear parking brake recording little or no effort | 27 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 23 |
Brakes imbalanced across an axle | 22 |
Offside Stop lamp not working |1.2.1b| | 22 |
Offside Front position lamp|s| not working |1.1.A.3b| | 20 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 19 |
Nearside Steering rack gaiter split |2.2.D.2d| | 19 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 19 |
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 18 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 17 |
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 17 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 17 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 16 |
Rear brake application uneven | 13 |
Offside Rear fog lamp not working |1.3.2b| | 13 |
Emissions not tested |7.0| | 12 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 12 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 11 |
Offside Rear Stop lamp not working |1.2.1b| | 10 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 10 |
Nearside Rear Shock absorber has negligible damping effect |2.7.5| | 10 |
Offside Rear Shock absorber has negligible damping effect |2.7.5| | 10 |
Parking brake lever has no reserve travel |3.1.6b| | 10 |
Offside Windscreen wiper blade deteriorated |8.2.2| | 9 |
Windscreen has damage | 9 |
Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 8 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 8 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 8 |
Offside rear brake recording little or no effort |3.7.B.5a| | 7 |
Nearside Rear Stop lamp not working |1.2.1b| | 7 |
Exhaust has part of the system excessively deteriorated |7.1.1a| | 7 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 7 |
Rear brake binding | 7 |
Service brake: efficiency below requirements |3.7.B.7| | 7 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 7 |
Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 6 |
Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 6 |
Offside Obligatory mirror missing |8.1.1| | 6 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 6 |
Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 6 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 6 |
Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 6 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 6 |
Front brake application uneven | 5 |
Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 5 |
Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 5 |
Offside Obligatory mirror insecure |8.1.1| | 5 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Windscreen wiper blade insecure | 5 |
Brake hose damaged | 4 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Offside Rear Rear fog lamp not working |1.3.2b| | 4 |
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Nearside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
Offside Steering rack gaiter insecure |2.2.D.2d| | 4 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 4 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Nearside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 4 |
Nearside Outer Front Front constant velocity joint gaiter split |2.5.C.1a| | 4 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 3 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Windscreen wiper blade deteriorated |8.2.2| | 3 |
rear brakes release unevenly |3.7.B.4| | 3 |
Exhaust engine idle speed too high |7.3.A.2a| | 3 |
Centre Exhaust has part of the system excessively deteriorated |7.1.1a| | 3 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 3 |
Offside Rear Braking system leaking |3.6.A.1| | 3 |
Nearside Front position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 3 |
Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Nearside Inner Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Offside Inner Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 3 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Rear Exhaust system not adequately supported |7.1.1| | 3 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 3 |
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Outer Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Nearside Outer Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Offside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 3 |
Offside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Stop lamp not working |1.2.1b| | 3 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Front position lamp|s| insecure |1.1.A.3a| | 3 |
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 3 |
Exhaust system not adequately supported |7.1.1| | 3 |
Centre Rear Exhaust has a major leak of exhaust gases |7.1.2| | 3 |