Most common failures | No# failures |
---|
Brake pipe excessively corroded | 8 |
Headlamp aim out of alignment | 4 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 4 |
Registration plate lamp issues | 2 |
Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 2 |
Offside Front Suspension arm corroded and seriously weakened |2.4.G.1| | 1 |
Offside Front Suspension arm inappropriately repaired |2.4.A.2| | 1 |
Rear brake application uneven | 1 |
Offside Rear Lower Trailing arm attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
Nearside Rear Lower Trailing arm attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
Rear Exhaust system not adequately supported |7.1.1| | 1 |
Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Rear Anti-roll bar attachment bracket modified and seriously weakened |2.4.A.2| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 1 |
Offside Front Anti-roll bar linkage insecure |2.4.G.1| | 1 |
Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 1 |
Brakes imbalanced across an axle | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Centre Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear Steering arm has relative movement at its fixings |2.2.B.1h| | 1 |
Offside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Brake load sensing valve linkage seized |3.6.E.3| | 1 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Mechanical brake component has restricted free movement | 1 |
Offside Rear position lamp|s| insecure |1.1.A.3a| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Offside Front Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 1 |
Offside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Nearside Rear Anti-roll bar fractured |2.4.G.1| | 1 |
Offside Front Ball joint has excessive play |2.2.B.1f| | 1 |
Rear Brake load sensing valve linkage seized |3.6.E.3| | 1 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Nearside Rear Axle has inadequate clearance with the bump stop |2.4.A.1a| | 1 |
Offside Rear Axle has inadequate clearance with the bump stop |2.4.A.1a| | 1 |
Exhaust emits excessive smoke or vapour of any colour |7.4.B.4| | 1 |
Nearside Front Wheel stud|s| missing |4.2.A.1e| | 1 |
Nearside Rear Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3| | 1 |
Offside Rear Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3| | 1 |
Nearside Rear Torsion bar insecure at an end fixing |2.4.E.2| | 1 |
Registration plate issues | 1 |
Offside Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Brake hose has insufficient room to move | 1 |
Nearside Rear Trailing arm attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |