Most common failures | No# failures |
---|
Registration plate lamp issues | 6 |
Windscreen wiper does not clear the windscreen effectively | 3 |
Exhaust system insecure (6.1.2 (a)) | 3 |
Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 2 |
Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 2 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 2 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Offside Rear fog lamp not working |1.3.2b| | 2 |
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 2 |
Fuel cap/sealing device missing (6.1.3 (b) (i)) | 2 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Nearside Front brake disc excessively scored |3.5.1h| | 1 |
Offside Front brake disc excessively scored |3.5.1h| | 1 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Rear Brake load sensing valve linkage seized |3.6.E.3| | 1 |
Front brake application uneven | 1 |
Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Brake pipe excessively corroded | 1 |
Brakes imbalanced across an axle | 1 |
Nearside Front Side repeater not working |1.4.A.2c| | 1 |
Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting door frame (6.2.2 (d) (i)) | 1 |
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 1 |
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 1 |
Rear brake binding | 1 |
Exhaust has a major leak of exhaust gases back box (6.1.2 (a)) | 1 |
Exhaust has a major leak of exhaust gases centre section (6.1.2 (a)) | 1 |
Exhaust has a major leak of exhaust gases down pipe (6.1.2 (a)) | 1 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 1 |
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) | 1 |
Position lamp switch does not operate in accordance with the requirements possible electrical fault (4.2.2 (a)) | 1 |
Emissions not tested (8.2.1.2 (d)) | 1 |
Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b)) | 1 |
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Nearside Front brake disc excessively pitted |3.5.1h| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Rear fog lamp light intensity significantly reduced Lense broken (4.5.4 (a)) | 1 |
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Offside Front Upper Position lamp not working (4.2.1 (a) (ii)) | 1 |
Nearside Rear Upper Position lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Offside Front Headlamp light intensity severely reduced Main beam (4.1.4 (a)) | 1 |
Battery insecure and likely to cause a short circuit (4.13 (a) (ii)) | 1 |
Position lamp switch does not illuminate the front and rear position lamps with a single operation (4.2.2 (a)) | 1 |
Nearside Rear Direction indicator lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii)) | 1 |
Nearside Side repeater likely to become detached (4.4.1 (c) (ii)) | 1 |
Fuel cap/sealing device ineffective (6.1.3 (b) (i)) | 1 |
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill at jacking point (6.2.2 (d) (i)) | 1 |
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill at jacking point (6.2.2 (d) (i)) | 1 |
Nearside Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i)) | 1 |
Offside Front Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 1 |