| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 27 |
| Registration plate lamp issues | 19 |
| Windscreen wiper does not clear the windscreen effectively | 17 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 11 |
| Parking brake: efficiency below requirements |3.7.B.7| | 10 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 9 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 8 |
| Brakes imbalanced across an axle | 8 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 7 |
| Horn not working |1.6.2a| | 7 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
| Offside Rear fog lamp not working |1.3.2b| | 7 |
| Exhaust system not adequately supported |7.1.1| | 7 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 6 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 6 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 5 |
| Nearside Headlamp insecure |1.7.3| | 5 |
| Rear fog lamp not working |1.3.2b| | 5 |
| Brake pipe excessively corroded | 5 |
| Offside Rear wheel bearing rough when rotated |2.6.1| | 5 |
| Rear brake binding | 5 |
| Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 5 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 5 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Rear Exhaust system not adequately supported |7.1.1| | 4 |
| Brake hose excessively deteriorated | 4 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 4 |
| Exhaust mounting missing |7.1.1b| | 4 |
| Offside Headlamp not working on main beam |1.7.5a| | 4 |
| Nearside Stop lamp not working |1.2.1b| | 4 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 4 |
| Battery insecure |1.9.1| | 4 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 4 |
| Offside Rear Rear fog lamp not working |1.3.2b| | 4 |
| Nearside Rear position lamp|s| not working |1.1.A.3b| | 4 |
| Nearside Steering rack gaiter split |2.2.D.2d| | 3 |
| Nearside Rear wheel bearing rough when rotated |2.6.1| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Track rod end ball joint has excessive play |2.2.B.1f| | 3 |
| Front brake disc in such a condition that it is seriously weakened | 3 |
| Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 3 |
| Brake load sensing valve linkage seized |3.6.E.3| | 3 |
| Nearside Headlamp aim beam image kick up to the offside |1.8| | 3 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 3 |
| Offside Front Direction indicators not working |1.4.A.2c| | 3 |
| Nearside Rear Service brake excessively binding (1.2.1 (f)) | 3 |
| Nearside Headlamp not working on main beam |1.7.5a| | 3 |
| Nearside Front Direction indicator not working |1.4.A.2c| | 3 |
| Offside Stop lamp not working |1.2.1b| | 3 |
| Service brake: efficiency below requirements |3.7.B.7| | 3 |
| Rear parking brake recording little or no effort | 3 |
| Centre Exhaust system not adequately supported |7.1.1| | 3 |
| Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 3 |
| Rear Mechanical brake component has restricted free movement | 3 |
| Nearside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 3 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
| Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 3 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 3 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 3 |
| Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 2 |
| Centre Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 2 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
| Nearside Front Headlamp not working on dipped beam |1.7.5a| | 2 |
| Offside Front Headlamp not working on main beam |1.7.5a| | 2 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 2 |
| Nearside Front wheel bearing rough when rotated |2.5.A.2| | 2 |
| Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
| Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
| Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
| Offside Rear position lamp|s| not working |1.1.A.3b| | 2 |
| Nearside Front Side repeater not working |1.4.A.2c| | 2 |
| Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
| Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 2 |
| Rear Rear fog lamp not working |1.3.2b| | 2 |
| Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 2 |
| Offside Upper Front position lamp|s| not working |1.1.A.3b| | 2 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
| Registration plate issues | 2 |
| Offside Front Direction indicator not working |1.4.A.2c| | 2 |
| Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 2 |
| Nearside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 2 |
| Offside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 2 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 2 |
| Offside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Front brake disc excessively pitted |3.5.1h| | 2 |
| Front Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
| All direction indicators not working (4.4.1 (a) (ii)) | 2 |
| Offside Windscreen wiper not working (3.4 (a)) | 2 |
| Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Battery insecure |1.9.1| | 2 |
| Nearside Side repeater not working |1.4.A.2c| | 2 |
| Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 2 |
| Nearside Rear Leaf spring fractured |2.4.B.1a| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded forward mount |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded top of cross member |2.4.A.3| | 1 |
| Nearside Side repeater incorrect colour |1.4.A.2f| | 1 |
| Offside Side repeater incorrect colour |1.4.A.2f| | 1 |
| Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch near track control arm mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch near track control arm mounting (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired inner arch near track control arm mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired inner arch near track control arm mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner arch/sill/chassis (5.3.6 (a) (i)) | 1 |
| Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
| Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Front Inner Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
| Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced spring hanger |6.1.1 |c| |i|| | 1 |
| Front Exhaust has a major leak of exhaust gases box |6.1.2 |a|| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting flitch |6.2.2 |d| |i|| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting flitch |6.2.2 |d| |i|| | 1 |
| Nearside Rear Position lamp not working |4.2.1 |a|| | 1 |
| Nearside Front Brake pipe leaking on a hydraulic braking system |1.1.11 |b| |ii|| | 1 |
| Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Main beam `tell-tale` not working |1.7.4c| | 1 |
| Offside Front Inner Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Front Side repeater not working |1.4.A.2c| | 1 |
| Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Offside Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 1 |
| Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting flitch to chassis leg (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear arch to chassis leg (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting flitch to chassis leg (6.2.2 (d) (i)) | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting complete sill front to rear (6.2.2 (d) (i)) | 1 |
| Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting complete sill (6.2.2 (d) (i)) | 1 |
| Offside Rear Leaf spring shackle bracket insecure to the extent that relative movement is visible excessively corroded through (5.3.1 (a) (ii)) | 1 |
| Nearside Rear Leaf spring shackle bracket insecure to the extent that relative movement is visible excessively corroded through (5.3.1 (a) (ii)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting quarter panel (6.2.2 (d) (i)) | 1 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting lower quarter panel (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch to quarter panel (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch to sill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill @ b pillar (6.2.2 (d) (i)) | 1 |
| Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting valance (6.2.2 (d) (i)) | 1 |
| Nearside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Offside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Offside Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Nearside Headlamps matched pair are not the same size |1.7.6| | 1 |
| Offside Headlamps matched pair are not the same size |1.7.6| | 1 |
| Nearside Headlamps matched pair are incorrectly positioned |1.7.3| | 1 |
| Offside Headlamps matched pair are incorrectly positioned |1.7.3| | 1 |
| Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Front Front passenger seat insecure |6.2.3| | 1 |
| Nearside Front brake disc excessively scored |3.5.1h| | 1 |
| Offside Front brake disc excessively scored |3.5.1h| | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect kicks up to the off side (4.1.2 (c)) | 1 |
| Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b| | 1 |
| Rear Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
| Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Central Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Nearside Engine mounting damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 1 |
| Nearside Rear Outer Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Seat belt flexible stalk deteriorated likely to lead to failure under load |5.2.4a| | 1 |
| Nearside Passenger`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
| Nearside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Nearside Front Headlamp insecure |1.7.3| | 1 |
| Offside Front Electrical wiring inadequately supported |1.9.2a| | 1 |
| Rear brake application uneven | 1 |
| Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| Offside Front Driver`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
| Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Rear Stop lamp not working |1.2.1b| | 1 |
| Nearside Rear Direction indicators not working |1.4.A.2c| | 1 |
| Nearside Front Suspension arm locating pin locking device not properly locked |2.4.G.3b| | 1 |
| Nearside Front Steering rack gaiter split |2.2.D.2d| | 1 |
| Offside Rear Brake cable has wires broken and is significantly weakened |3.5.1b| | 1 |
| Centre Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Nearside Rear Leaf spring has a deteriorated anchor pin rubber bush resulting in excessive movement |2.4.B.2| | 1 |
| Offside Rear Leaf spring has a deteriorated anchor pin rubber bush resulting in excessive movement |2.4.B.2| | 1 |
| Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
| Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
| Direction indicators not working |1.4.A.2c| | 1 |
| Hazard warning lamps inoperative |1.4.B.1b| | 1 |
| Battery insecure nearside and offside |1.9.1| | 1 |
| Offside Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Offside Rear Rear position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 1 |
| Nearside Front Track rod end socket spring weak |2.2.B.1e| | 1 |
| Offside Front Outer Prop shaft joint constant velocity boot no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Rear Brake load sensing valve linkage defective and function impaired (1.1.17 (a)) | 1 |
| Offside Rear Rear wheel bearing rough when rotated |2.6.1| | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2| | 1 |
| Offside Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
| Nearside Front Steering pivot point has excessive play |2.2.B.1g| | 1 |
| Headlamp switch faulty |1.7.1| | 1 |
| Offside Front Parking brake mechanism/associated mounting prescribed area is excessively corroded inner/outer sill |3.1.9| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired inner sill |2.4.A.3| | 1 |
| Offside Side repeater not working |1.4.A.2c| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 1 |
| Offside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Front Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 1 |
| Nearside Headlamp insecure (4.1.1 (c)) | 1 |
| Offside Headlamp insecure (4.1.1 (c)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength around suspension turret (5.3.6 (a) (i)) | 1 |
| Offside Front Drivers seat insecure (6.2.5 (a) (ii)) | 1 |
| Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Offside Front Side repeater not working (4.4.1 (a) (ii)) | 1 |
| Nearside Front Headlamp are incorrectly positioned insecure (4.1.4 (a)) | 1 |
| Offside Rear Service brake excessively binding cannot check wheel bearing (1.2.1 (f)) | 1 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt torn (6.1.7 (g) (ii)) | 1 |
| Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Rear Exhaust silencer insecure both rubbers missing (8.1.1 (b) (i)) | 1 |
| Fuel cap/sealing device missing No Key |6.1.3 |b| |i|| | 1 |
| Nearside Position lamp not working |4.2.1 |a|| | 1 |
| Offside Rear Position lamp not working Inner |4.2.1 |a|| | 1 |
| Rear All direction indicators light intensity significantly reduced |4.4.3 |a|| | 1 |
| Rear All position lamps light intensity significantly reduced |4.2.3 |a| |ii|| | 1 |
| Spare wheel insecure in carrier |6.1.5 |b| |i|| | 1 |
| Battery insecure and likely to cause a short circuit |4.13 |a| |ii|| | 1 |
| Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
| Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
| Nearside Front Suspension arm pin or bush excessively worn Bush (5.3.4 (a) (i)) | 1 |
| Offside Front Suspension arm pin or bush excessively worn Bush (5.3.4 (a) (i)) | 1 |
| Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 1 |
| Nearside Outer Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Power steering pump drive system defective |2.3.6| | 1 |
| Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 1 |
| Nearside Upper Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Front Battery insecure |1.9.1| | 1 |
| Rear Brake load sensing valve linkage seized |3.6.E.3| | 1 |
| Vehicle Identification Number not permanently displayed |6.3.5.a| | 1 |
| Offside Headlamp insecure |1.7.3| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 1 |
| Power steering inoperative |2.3.3a| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
| Nearside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
| Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front (5.3.6 (a) (i)) | 1 |
| Front Service brake excessively fluctuating nearside and offside |1.2.1 |e|| | 1 |
| Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |3 areas| |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength behind bumper corner |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength behind bumper corner |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch | 2 areas| |5.3.6 |a| |i|| | 1 |
| Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 1 |
| Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b)) | 1 |
| Nearside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Nearside Windscreen wiper not working (3.4 (a)) | 1 |
| Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner Wheel Well X 4 (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel Well (5.3.6 (a) (i)) | 1 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired inner wheel arch/chassis etc (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired inner arch/sill etc (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired inner arch/sill etc (5.3.6 (a) (i)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Front Headlamp not working on main beam |1.7.5a| | 1 |
| Offside Rear Exhaust system not adequately supported |7.1.1| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
| Nearside Side repeater adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
| Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Offside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Nearside Front Inner Steering arm has relative movement at its fixings excessive play |2.2.B.1h| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings back panal |6.1.B.2| | 1 |
| Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| front brake juddering severely |3.7.A.2b| | 1 |
| Headlamp not working on main beam |1.7.5a| | 1 |
| Offside Rear rear brake recording little or no effort handbrake |3.7.B.5a| | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
| Nearside Front Lower Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Offside Front Lower Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Rear fog lamp tell tale not working |1.3.1b| | 1 |
| Fuel cap/sealing device sealing washer missing key |7.2.4c| | 1 |
| Windscreen has damage | 1 |
| Offside Rear Stop lamp not working |1.2.1b| | 1 |
| Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
| Centre Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wing corroded around engine mounting (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced battery tray corroded (6.1.1 (c) (i)) | 1 |
| Offside Front Anti-roll bar attachment bracket/mounting bolt missing |2.4.G.1| | 1 |
| Driver`s seat insecure |6.2.5 |a| |ii|| | 1 |
| Brake lever pivot excessively tight |1.1.1 |a|| | 1 |
| Rear Service brake grabbing severely Both |1.2.1 |c|| | 1 |
| Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
| Direction indicators flashing less than 60 times a minute |1.4.A.2g| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength bay (5.3.6 (a) (i)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Rear fog lamp tell-tale not working (4.9.1 (a) (ii)) | 1 |
| Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) | 1 |
| Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting door frame within 30cm of seat mount (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i)) | 1 |
| Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Offside Front Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 1 |
| Brake performance not tested (1.2.1 (g)) | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Rear fog lamp adversely affected by the operation of another lamp When main beam switched on (4.5.4 (b)) | 1 |
| Indicator switch inoperative (4.4.2 (a) (ii)) | 1 |
| Offside Battery insecure |1.9.1| | 1 |
| Nearside Windscreen wiper blade missing |8.2.2| | 1 |
| Steering column top mounting bracket insecure |2.1.2d| | 1 |
| Emissions not tested |7.0| | 1 |
| Rear Brake hose twisted |3.6.B.4c| | 1 |
| Nearside Front Suspension arm corroded and seriously weakened |2.4.G.1| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
| Offside Rear Parking brake inoperative on one side (1.4.1 (a)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inside wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inside wheel arch & inner sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
| Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail |6.1.1 |c| |i|| | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch |6.1.1 |c| |i|| | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced door step |6.1.1 |c| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced door step |6.1.1 |c| |i|| | 1 |
| Centre Exhaust mounting missing |7.1.1b| | 1 |
| Hazard warning switch faulty |1.4.B.1d| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Brake valve leaking |3.6.A.1| | 1 |
| Nearside Rear wheel bearing has excessive play |2.6.2| | 1 |
| Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2| | 1 |
| Nearside Front Outer Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Fuel cap/sealing device missing key (6.1.3 (b) (i)) | 1 |
| Offside Side repeater not working (4.4.1 (a) (ii)) | 1 |
| Offside Front Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Nearside Headlamp aim beam image kick up to the offside |1.6.B1| | 1 |
| Nearside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
| Front passenger seat insecure |6.2.3| | 1 |
| Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Nearside Front Lower Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |