Most common failures | No# failures |
---|
Brake pipe excessively corroded | 5 |
Windscreen wiper does not clear the windscreen effectively | 4 |
Offside Front Direction indicator not working |1.4.A.2c| | 3 |
Brake hose excessively deteriorated | 3 |
Nearside Front Direction indicator not working |1.4.A.2c| | 3 |
Offside Headlamp insecure |1.7.3| | 3 |
Nearside Stop lamp not working |1.2.1b| | 3 |
Headlamp aim out of alignment | 3 |
Offside Headlamp not working on main beam |1.7.5a| | 3 |
Offside Rear fog lamp not working |1.3.2b| | 3 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 2 |
Offside Front Headlamp not working on main beam |1.7.5a| | 2 |
Rear Rear fog lamp not working |1.3.2b| | 2 |
Fuel system component leaking |7.2.3| | 2 |
Brakes imbalanced across an axle | 2 |
Offside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 2 |
Offside Front Direction indicators not working |1.4.A.2c| | 2 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 2 |
Brake load sensing valve linkage seized |3.6.E.3| | 2 |
Exhaust has part of the system excessively deteriorated |7.1.1a| | 2 |
Offside Stop lamp not working |1.2.1b| | 2 |
Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
Fuel cap/sealing device does not fasten securely by positive means |7.2.4b| | 2 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Registration plate issues | 2 |
Nearside Side repeater not working |1.4.A.2c| | 2 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 2 |
Centre Front Steering column universal joint locking device insecure |2.1.6| | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Nearside Front brake disc excessively pitted |3.5.1h| | 1 |
Offside Front brake disc excessively pitted |3.5.1h| | 1 |
Centre Rear Brake load sensing valve linkage seized |3.6.E.3| | 1 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Rear Brake cable has restricted free movement |3.5.1k| | 1 |
Exhaust mounting missing |7.1.1b| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Obligatory mirror does not provide a view to the rear |8.1.2b| | 1 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Front Side repeater not working |1.4.A.2c| | 1 |
Nearside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Windscreen wiper blade insecure | 1 |
Battery insecure excessive corrosion to battery tray/mounting area |1.9.1| | 1 |
Offside Indicator tell tale inoperative |1.4.A.2a| | 1 |
Electrical wiring insecure within engine bay |1.9.2a| | 1 |
Electrical wiring inadequately supported within engine bay |1.9.2a| | 1 |
Offside Vehicle structure has excessive corrosion which adversely affects braking or steering behind drivers front wheel |6.1.A.1| | 1 |
Nearside Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
Exhaust has a major leak of exhaust gases at silencers |7.1.2| | 1 |
Exhaust system not adequately supported complete system |7.1.1| | 1 |
Exhaust has a major leak of exhaust gases pipe leaking at turbo mount & insecure |7.1.2| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded shackle mounting |2.4.A.3| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Offside Front Headlamp insecure |1.7.3| | 1 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Rear Brake load sensing valve linkage seized |3.6.E.3| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis outrigger |6.1.B.2| | 1 |
Nearside Front Electrical wiring inadequately supported in engine bay behind h/lamp |1.9.2a| | 1 |
Offside Front Electrical wiring inadequately supported in engine bay behind h/lamp |1.9.2a| | 1 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Service brake excessively binding |1.2.1 |f|| | 1 |
Service brake excessively fluctuating Both rear. |1.2.1 |e|| | 1 |
Fluid leaking continuously posing a serious risk to road safety Diesel leak from engine. |8.4.1 |a| |ii|| | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength At jacking point & inner wheel arch. |5.3.6 |a| |i|| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength As above. |5.3.6 |a| |i|| | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength At inner wheelarch at spring/shock absorber mounting. |5.3.6 |a| |i|| | 1 |
Fuel cap/sealing device ineffective |6.1.3 |b| |i|| | 1 |
All direction indicators not working Both front. |4.4.1 |a| |ii|| | 1 |
Offside Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
Nearside Front Position lamp not working |4.2.1 |a|| | 1 |
Offside Front Position lamp not working |4.2.1 |a|| | 1 |
Nearside Rear Position lamp not working |4.2.1 |a|| | 1 |
Registration plate lamp issues | 1 |
Nearside Rear Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
Offside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Exhaust system not adequately supported |7.1.1| | 1 |
Headlamp not working on main beam |1.7.5a| | 1 |
Fuel hose leaking |7.2.3| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Headlamps matched pair are incorrectly positioned |1.7.3| | 1 |
Offside Headlamps matched pair are incorrectly positioned |1.7.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Power steering pump drive system defective |2.3.6| | 1 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |