| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 170 |
| Registration plate lamp issues | 128 |
| Windscreen wiper does not clear the windscreen effectively | 116 |
| Brake pipe excessively corroded | 77 |
| Brake hose excessively deteriorated | 71 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 59 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 54 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 52 |
| Brakes imbalanced across an axle | 49 |
| Rear brake binding | 46 |
| Parking brake: efficiency below requirements |3.7.B.7| | 40 |
| Exhaust system not adequately supported |7.1.1| | 40 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 39 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 37 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 36 |
| Rear parking brake recording little or no effort | 34 |
| Nearside Front Direction indicator not working |1.4.A.2c| | 33 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 32 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 32 |
| Horn not working |1.6.2a| | 30 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 28 |
| Offside Headlamp insecure |1.7.3| | 27 |
| Battery insecure |1.9.1| | 26 |
| Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 26 |
| Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 24 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 24 |
| Offside Rear fog lamp not working |1.3.2b| | 23 |
| Nearside Headlamp insecure |1.7.3| | 23 |
| Registration plate issues | 21 |
| Offside Front constant velocity joint gaiter split |2.5.C.1a| | 21 |
| Rear fog lamp not working |1.3.2b| | 21 |
| Service brake: efficiency below requirements |3.7.B.7| | 20 |
| Offside Front Direction indicator not working |1.4.A.2c| | 20 |
| Driver`s seat insecure |6.2.A.1| | 19 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 19 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 18 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 18 |
| Front brake disc in such a condition that it is seriously weakened | 17 |
| Offside Stop lamp not working |1.2.1b| | 17 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 17 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 17 |
| Offside Front Front position lamp|s| not working |1.1.A.3b| | 16 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 16 |
| Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 15 |
| Nearside Headlamp not working on main beam |1.7.5a| | 14 |
| Nearside Stop lamp not working |1.2.1b| | 14 |
| Rear Exhaust system not adequately supported |7.1.1| | 14 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 13 |
| Centre Exhaust mounting missing |7.1.1b| | 13 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 13 |
| Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 13 |
| Brake load sensing valve linkage seized |3.6.E.3| | 12 |
| Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 12 |
| Nearside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 12 |
| Emissions not tested |7.0| | 12 |
| Centre Exhaust system not adequately supported |7.1.1| | 12 |
| Offside Steering rack gaiter split |2.2.D.2d| | 12 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 11 |
| Exhaust mounting missing |7.1.1b| | 11 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 11 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 11 |
| Windscreen washer not working | 10 |
| Nearside Steering rack gaiter split |2.2.D.2d| | 10 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 10 |
| Offside Rear Rear fog lamp not working |1.3.2b| | 10 |
| Offside Side repeater not working |1.4.A.2c| | 10 |
| Rear brake application uneven | 10 |
| Rear fog lamp tell tale not working |1.3.1b| | 9 |
| Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 9 |
| Offside Headlamp not working on main beam |1.7.5a| | 9 |
| Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 9 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 9 |
| Nearside Rear Stop lamp not working |1.2.1b| | 8 |
| Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 8 |
| Rear Exhaust mounting missing |7.1.1b| | 8 |
| Nearside Front Direction indicators not working |1.4.A.2c| | 8 |
| Brake performance not tested |3.7.A.1| | 8 |
| Nearside Front Headlamp insecure |1.7.3| | 8 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 8 |
| Nearside Side repeater not working |1.4.A.2c| | 8 |
| Offside Windscreen wiper not operating automatically when switched on |8.2.1b| | 8 |
| Windscreen wiper blade insecure | 8 |
| Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 8 |
| Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 7 |
| Brake hose has insufficient room to move | 7 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 7 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 7 |
| Rear Brake load sensing valve linkage seized |3.6.E.3| | 7 |
| Offside Rear Stop lamp not working |1.2.1b| | 7 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 7 |
| Windscreen wiper not operating automatically when switched on |8.2.1b| | 7 |
| Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 7 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 7 |
| Horn not loud enough to be heard by another road user |1.6.2b| | 7 |
| Offside Rear wheel bearing rough when rotated |2.6.1| | 6 |
| Offside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 6 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
| Service brake: efficiency below requirements |3.7.C.1a| | 6 |
| Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 6 |
| Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 6 |
| Offside Front Headlamp not working on main beam |1.7.5a| | 6 |
| Hazard warning switch faulty |1.4.B.1d| | 6 |
| Nearside Windscreen wiper not operating automatically when switched on |8.2.1b| | 6 |
| Nearside Rear wheel bearing rough when rotated |2.6.1| | 6 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 6 |
| Nearside Rear wheel bearing has excessive play |2.6.2| | 6 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 6 |
| Brake load sensing valve seized |3.6.E.3| | 6 |
| Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 6 |
| Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 6 |
| Nearside Rear Direction indicator not working |1.4.A.2c| | 6 |
| Offside Track rod end ball joint has excessive play |2.2.B.1f| | 6 |
| Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 6 |
| Nearside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 6 |
| Offside Front Steering rack gaiter split |2.2.D.2d| | 5 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 5 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 5 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
| Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 5 |
| Offside Rear Service brake excessively binding (1.2.1 (f)) | 5 |
| Hazard warning lamps inoperative |1.4.B.1b| | 5 |
| Offside Front Direction indicators not working |1.4.A.2c| | 5 |
| Offside Indicator tell tale inoperative |1.4.A.2a| | 5 |
| Nearside Front brake disc excessively pitted |3.5.1h| | 5 |
| Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 5 |
| Offside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 5 |
| Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
| Centre Exhaust has a major leak of exhaust gases |7.1.2| | 5 |
| Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 5 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 5 |
| Nearside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 5 |
| Nearside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 5 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
| Offside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
| Offside Front Side repeater not working |1.4.A.2c| | 5 |
| Parking brake lever has no reserve travel |3.1.6b| | 5 |
| Offside Front Headlamp insecure |1.7.3| | 5 |
| Nearside Front Headlamp not working on main beam |1.7.5a| | 5 |
| Headlamp switch faulty |1.7.1| | 4 |
| Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Parking brake lever, pawl mechanism pivots or their associated mountings are insecure |3.1.4b| | 4 |
| Offside Windscreen wiper blade deteriorated |8.2.2| | 4 |
| Nearside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Nearside Rear Rear wheel bearing rough when rotated |2.6.1| | 4 |
| Nearside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 4 |
| Nearside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 4 |
| Headlamp switch insecure |1.7.1| | 4 |
| Nearside Headlamp aim beam image kick up to the offside |1.8| | 4 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 4 |
| Offside Front Windscreen wiper blade deteriorated |8.2.2| | 4 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 4 |
| Offside rear brake recording little or no effort |3.7.B.5a| | 4 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Offside Rear position lamp|s| not working |1.1.A.3b| | 4 |
| Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Offside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 4 |
| Rear Mechanical brake component has restricted free movement | 4 |
| Nearside Front Headlamp not working on dipped beam |1.7.5a| | 4 |
| Horn not working (7.7 (a) (ii)) | 4 |
| Offside Front Brake pipe inadequately clipped |3.6.B.1| | 4 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 4 |
| Exhaust has part of the system excessively deteriorated |7.1.1a| | 4 |
| Nearside Windscreen wiper blade deteriorated |8.2.2| | 4 |
| Nearside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Nearside Indicator tell tale inoperative |1.4.A.2a| | 4 |
| Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 4 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 4 |
| Nearside Front Passenger`s seat insecure |6.2.A.1| | 4 |
| Rear fog lamp not working |4.5.1 |a| |ii|| | 4 |
| Nearside Rear Service brake excessively binding (1.2.1 (f)) | 4 |
| Body has a sharp edge caused by corrosion |6.1.C.1| | 3 |
| Bonnet cannot be secured in the closed position |8.4.1| | 3 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Front brake disc excessively pitted |3.5.1h| | 3 |
| Offside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 3 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Offside Front brake disc excessively pitted |3.5.1h| | 3 |
| Offside Rear Rear wheel bearing rough when rotated |2.6.1| | 3 |
| Offside Obligatory mirror insecure |8.1.1| | 3 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 3 |
| Nearside Windscreen wiper blade missing |8.2.2| | 3 |
| Nearside Rear Direction indicators not working |1.4.A.2c| | 3 |
| Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 3 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 3 |
| Brake pedal spongy |3.3.B.1b| | 3 |
| Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 3 |
| Fuel cap/sealing device does not fasten securely by positive means |7.2.4b| | 3 |
| Offside Front Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 3 |
| All position lamps not working |1.1.A.3b| | 3 |
| Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 3 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 3 |
| Front brake application uneven | 3 |
| Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 3 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 3 |
| Offside Rear Brake pipe inadequately clipped |3.6.B.1| | 3 |
| Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 3 |
| Stop lamp not working |1.2.1b| | 3 |
| Front position lamp|s| not working |1.1.A.3b| | 3 |
| Nearside Rear Service brake excessively binding |1.2.1 |f|| | 3 |
| Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 3 |
| Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Front Body has a sharp edge caused by damage |6.1.C.1| | 3 |
| Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 3 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 3 |
| Nearside Front wheel bearing rough when rotated |2.5.A.2| | 3 |
| Offside Rear Direction indicator not working |1.4.A.2c| | 3 |
| Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 3 |
| Offside Front Direction indicator insecure |1.4.A.2b| | 3 |
| Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 3 |
| Rear Brake pipe inadequately clipped |3.6.B.1| | 3 |
| Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 3 |
| Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 3 |
| Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 3 |
| Nearside Inner Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Rear wheel bearing has excessive play |2.6.2| | 3 |
| Nearside Front Side repeater not working |1.4.A.2c| | 3 |
| Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 3 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 3 |
| Exhaust engine idle speed too high |7.3.A.2a| | 3 |
| Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 3 |
| Offside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 3 |
| Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
| Nearside Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
| Offside Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
| Direction indicators not working |1.4.A.2c| | 3 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 3 |
| Nearside Side repeater insecure |1.4.A.2b| | 3 |
| Offside Rear Service brake lagging in operation (1.2.1 (d)) | 3 |
| Driver`s door cannot be opened from inside the vehicle |6.2.B.1b| | 3 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
| Nearside Front Side repeater insecure |1.4.A.2b| | 2 |
| Brake pedal creeps down when held under pressure |3.3.B.1a| | 2 |
| Nearside Steering arm has relative movement at its fixings |2.2.B.1h| | 2 |
| Offside Front Position lamp not working |4.2.1 |a|| | 2 |
| Offside Front Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 2 |
| Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
| Offside Direction indicator not working |1.4.A.2c| | 2 |
| Offside Driver`s seat insecure |6.2.A.1| | 2 |
| Offside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Rear Rear wheel bearing has excessive play |2.6.2| | 2 |
| Offside Headlamp insecure (4.1.1 (c)) | 2 |
| Main beam `tell-tale` not working |1.7.4c| | 2 |
| Nearside Rear Leaf spring deteriorated and seriously weakened |2.4.B.1a| | 2 |
| Offside Rear Leaf spring deteriorated and seriously weakened |2.4.B.1a| | 2 |
| Offside Brake cable has wires broken and is significantly weakened |3.5.1b| | 2 |
| Brake pedal creeps down while the pedal is held under pressure |3.3.B.1a| | 2 |
| Front brake disc excessively scored |3.5.1h| | 2 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 2 |
| Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
| Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 2 |
| Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 2 |
| Nearside Rear Body has a sharp edge caused by damage |6.1.C.1| | 2 |
| Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
| Fuel cap/sealing device mounting flange/sealing method defective |7.2.4c| | 2 |
| Nearside Rear Brake load sensing valve linkage seized |3.6.E.3| | 2 |
| Front Front position lamp|s| not working |1.1.A.3b| | 2 |
| Offside Front Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 2 |
| Offside Front Seat belt retracting mechanism defective |5.2.5b| | 2 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 2 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 2 |
| Brake fluid warning lamp illuminated |3.6.G.2| | 2 |
| Offside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
| Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Nearside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
| Brake pedal has insufficient reserve travel (1.1.2 (a)) | 2 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 2 |
| Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 2 |
| Horn not working (7.7 (a)) | 2 |
| Spare wheel insecure |6.4.2| | 2 |
| rear brake recording little or no effort |3.7.B.5a| | 2 |
| Front Exhaust mounting missing |7.1.1b| | 2 |
| Offside Front Driver`s seat insecure |6.2.A.1| | 2 |
| Offside Headlamp not working on main beam |4.1.1 |a| |ii|| | 2 |
| Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 2 |
| Front Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 2 |
| Service brake efficiency below requirements |1.2.2 |a| |i|| | 2 |
| Nearside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Front Exhaust system not adequately supported |7.1.1| | 2 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 2 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Fuel tank leaking |7.2.3| | 2 |
| Offside Obligatory mirror missing |8.1.1| | 2 |
| Nearside Front Tie bar/rod attachment bracket/mounting insecure |2.4.G.1| | 2 |
| Offside Front Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 2 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 2 |
| Offside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 2 |
| Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b| | 2 |
| Nearside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Offside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Front Position lamp not working (4.2.1 (a) (ii)) | 2 |
| Exhaust emissions carbon monoxide content excessive |8.2.1.2 |b|| | 2 |
| Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 2 |
| Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 2 |
| Windscreen has damage | 2 |
| Fuel hose leaking |7.2.3| | 2 |
| Headlamp aim not tested |1.8.A.1c| | 2 |
| Offside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
| Offside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 2 |
| Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
| Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
| Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
| Nearside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
| Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
| Nearside Front passenger seat insecure |6.2.3| | 2 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Front Windscreen wiper blade deteriorated |8.2.2| | 2 |
| Rear Brake load sensing valve seized |3.6.E.3| | 2 |
| Offside Inner Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Outer Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Windscreen has a combination of minor damage areas which restrict the drivers view |8.3.1c| | 2 |
| Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 2 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 2 |
| Offside Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c| | 2 |
| Nearside Front wheel bearing has excessive play |2.5.A.3c| | 2 |
| Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Offside Rear Braking system leaking |3.6.A.1| | 2 |
| Offside Front Shock absorber has a serious fluid leak |2.7.3| | 2 |
| Offside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 2 |
| Steering column top mounting bracket insecure |2.1.2d| | 2 |
| Rear fog lamp tell-tale not working (4.9.1 (a) (ii)) | 2 |
| Nearside Front Lower Suspension arm pin or bush excessively worn inner bush (5.3.4 (a) (i)) | 2 |
| Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 2 |
| Exhaust system insecure |6.1.2 |a|| | 2 |
| Offside Front Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 2 |
| Brake performance not tested (1.2.1 (g)) | 2 |
| Nearside Headlamp insecure (4.1.1 (c)) | 2 |
| Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
| Offside Battery insecure |1.9.1| | 2 |
| Nearside Battery insecure |1.9.1| | 2 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i)) | 2 |
| Offside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
| Nearside Front Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
| Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 2 |
| Nearside Outer Front constant velocity joint is insecure |2.5.C.1b| | 2 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Brake hose damaged | 2 |
| Headlamp not working on dipped beam |1.7.5a| | 2 |
| Front brake excessively fluctuating | 2 |
| Nearside Front Steering rack gaiter split |2.2.D.2d| | 2 |
| Windscreen wiper not working (3.4 (a)) | 2 |
| Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 2 |
| Service brake: efficiency below requirements |3.7.D.4| | 2 |
| Parking brake: efficiency below requirements |3.7.D.4| | 2 |
| Headlamp not working on dipped beam both |1.7.5a| | 2 |
| Battery insecure and likely to fall from carrier |4.13 |a| |ii|| | 2 |
| Offside Rear Leaf spring splayed and fouling |2.4.B.1c| | 2 |
| Offside Front position lamp(s) not working (1.1.A.3b) | 2 |
| Nearside Headlamp not working on main beam (1.7.5a) | 2 |
| Nearside Front position lamp(s) not working (1.1.A.3b) | 2 |
| Nearside Rear Leaf spring has excessive wear in a shackle pin and/or bush |2.4.B.2| | 2 |
| Offside Steering rack gaiter insecure |2.2.D.2d| | 2 |
| Nearside Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Headlamp aim not tested |1.8.A.1c| | 2 |
| Brake pedal has insufficient reserve movement |3.3.A.5| | 2 |
| Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
| Nearside Rear Rear fog lamp not working |1.3.2b| | 2 |
| Offside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Front Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |