| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 42 |
| Registration plate lamp issues | 33 |
| Windscreen wiper does not clear the windscreen effectively | 18 |
| Rear brake binding | 14 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 11 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 11 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 10 |
| Registration plate issues | 10 |
| Offside Rear fog lamp not working |1.3.2b| | 9 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 9 |
| Exhaust system not adequately supported |7.1.1| | 9 |
| Horn not working |1.6.2a| | 8 |
| Battery insecure |1.9.1| | 8 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
| Nearside Headlamp insecure |1.7.3| | 8 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 8 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
| Service brake: efficiency below requirements |3.7.B.7| | 7 |
| Rear parking brake recording little or no effort | 6 |
| Parking brake: efficiency below requirements |3.7.B.7| | 6 |
| Offside Headlamp insecure |1.7.3| | 6 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 6 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 6 |
| Brake hose excessively deteriorated | 6 |
| Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 6 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 6 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 5 |
| Nearside Rear Leaf spring anchor bracket corroded and seriously weakened |2.4.B.6d| | 5 |
| Front brake disc in such a condition that it is seriously weakened | 5 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 5 |
| Direction indicators not working |1.4.A.2c| | 4 |
| Hazard warning lamps inoperative |1.4.B.1b| | 4 |
| Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 4 |
| Offside Rear Leaf spring anchor bracket corroded and seriously weakened |2.4.B.6d| | 4 |
| Offside Front Direction indicator not working |1.4.A.2c| | 4 |
| Nearside Side repeater not working |1.4.A.2c| | 4 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Rear Exhaust system not adequately supported |7.1.1| | 4 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 4 |
| Nearside Headlamp not working on main beam |1.7.5a| | 4 |
| Brakes imbalanced across an axle | 4 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Nearside Front Direction indicator not working |1.4.A.2c| | 3 |
| Centre Exhaust mounting missing |7.1.1b| | 3 |
| Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 3 |
| Nearside Front Headlamp not working on dipped beam |1.7.5a| | 3 |
| Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 3 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 3 |
| Nearside Stop lamp not working |1.2.1b| | 3 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 3 |
| Driver`s seat insecure |6.2.A.1| | 3 |
| Rear Exhaust mounting missing |7.1.1b| | 3 |
| Brake pipe excessively corroded | 3 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 3 |
| Offside Rear wheel bearing rough when rotated |2.6.1| | 3 |
| Rear fog lamp tell tale not working |1.3.1b| | 3 |
| Centre Exhaust system not adequately supported |7.1.1| | 3 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 3 |
| Nearside Body has a sharp edge caused by corrosion |6.1.C.1| | 3 |
| Rear Rear fog lamp not working |1.3.2b| | 3 |
| Windscreen washer not working | 3 |
| Nearside Brake pipe inadequately clipped |3.6.B.1| | 2 |
| Fuel cap/sealing device sealing washer missing |7.2.4c| | 2 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 2 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Exhaust mounting missing |7.1.1b| | 2 |
| Offside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 2 |
| Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 2 |
| Nearside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Offside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 2 |
| Nearside Front brake disc excessively pitted |3.5.1h| | 2 |
| Offside rear brake recording little or no effort |3.7.B.5a| | 2 |
| Offside Front Position lamp not working |4.2.1 |a|| | 2 |
| Offside Front constant velocity joint is insecure |2.5.C.1b| | 2 |
| Steering column top mounting bracket insecure |2.1.2d| | 2 |
| Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
| Hazard warning switch faulty |1.4.B.1d| | 2 |
| Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
| Offside Headlamp not working on main beam |1.7.5a| | 2 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 2 |
| Offside Obligatory mirror insecure |8.1.1| | 2 |
| Offside Rear position lamp|s| not working |1.1.A.3b| | 2 |
| Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 2 |
| Offside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
| Offside Rear Stop lamp not working |1.2.1b| | 2 |
| Nearside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Offside Side repeater not working |1.4.A.2c| | 2 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 2 |
| Offside Front Headlamp not working on main beam |1.7.5a| | 2 |
| Offside Front Driver`s seat insecure |6.2.A.1| | 2 |
| Nearside Outer Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 2 |
| Brake load sensing valve seized |3.6.E.3| | 2 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 2 |
| Nearside Rear Service brake excessively binding (1.2.1 (f)) | 2 |
| Front passenger seat insecure |6.2.3| | 2 |
| Nearside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 2 |
| Emissions not tested |7.0| | 2 |
| Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 2 |
| Offside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Central Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Exhaust has a major leak of exhaust gases rear silencer |7.1.2| | 1 |
| Exhaust emissions hydrocarbon content excessive |8.2.1.2 |b|| | 1 |
| Brake hydraulic reservoir fluid level significantly below minimum level |1.1.10 |d| |ii|| | 1 |
| Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill |6.2.2 |d| |i|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill |6.2.2 |d| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger |5.3.6 |a| |i|| | 1 |
| Offside Stop lamp not working |1.2.1b| | 1 |
| Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
| Front Direction indicators not working |1.4.A.2c| | 1 |
| Rear Direction indicators not working |1.4.A.2c| | 1 |
| Nearside Rear position lamp|s| insecure |1.1.A.3a| | 1 |
| Offside Rear position lamp|s| insecure |1.1.A.3a| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| Nearside Windscreen wiper blade missing |8.2.2| | 1 |
| Nearside Rear Leaf spring shackle bracket loose |2.4.B.6a| | 1 |
| Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| Horn not loud enough to be heard by another road user |1.6.2b| | 1 |
| Rear Leaf spring deteriorated and seriously weakened |2.4.B.1a| | 1 |
| Offside Side repeater excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e| | 1 |
| Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Lower Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Parking brake lever, pawl mechanism pivots or their associated mountings are insecure |3.1.4b| | 1 |
| Rear passenger door does not latch securely closed |6.2.B.1a| | 1 |
| Vehicle Identification Number not permanently displayed |6.3.5.a| | 1 |
| Nearside Inner Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Nearside Outer Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
| Offside Outer Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
| Bonnet retaining device ineffective |8.4.2| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Front Front position lamp|s| insecure |1.1.A.3a| | 1 |
| Nearside Front Side repeater insecure |1.4.A.2b| | 1 |
| Nearside Front Front drive shaft coupling flexible rubber or fabric coupling unit breaking up |2.5.C.1d| | 1 |
| Body has a projection caused by damage |6.1.C.1| | 1 |
| Nearside Front Brake pipe leaking by bulkhead |3.6.A.1| | 1 |
| Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Front Direction indicator adversely affected by the operation of another lamp with headlamp |1.4.A.2h| | 1 |
| Nearside Seat belt flexible stalk deteriorated likely to lead to failure under load |5.2.4a| | 1 |
| Offside Front Brake pipe fouled by moving parts |3.6.B.2a| | 1 |
| Lower engine mounting deteriorated resulting in excessive movement |6.1.D.1a| | 1 |
| Front Bumper insecure |6.1.4 |a| |i|| | 1 |
| Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Electrical wiring insecure |1.9.2a| | 1 |
| Nearside Front Tie bar/rod attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
| Offside Front All position lamps not working |1.1.A.3b| | 1 |
| Exhaust engine idle speed too high |7.3.A.2a| | 1 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Tie bar/rod severely distorted |2.4.G.1| | 1 |
| Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| Nearside Inner Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Inner Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Outer Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Outer Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Inner Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Inner Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 1 |
| Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Nearside front brake juddering severely |3.7.A.2b| | 1 |
| Offside Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Nearside Rear Rear wheel bearing rough when rotated |2.6.1| | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect not compatible with uk roads (4.1.2 (c)) | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect not compatible with uk roads (4.1.2 (c)) | 1 |
| Offside Front Inner Headlamp insecure (4.1.1 (c)) | 1 |
| Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing/wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing/wheel arch (5.3.6 (a) (i)) | 1 |
| Position lamp switch insecure |1.1.A.1| | 1 |
| Offside Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Nearside Front Road wheel fixing missing (5.2.1 (a) (i)) | 1 |
| Nearside Rear Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Offside Rear Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded WING |2.4.A.3| | 1 |
| Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases manifold (6.1.2 (a)) | 1 |
| Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Nearside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Nearside Front Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Windscreen has damage | 1 |
| Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Nearside Steering rack gaiter insecure |2.2.D.2d| | 1 |
| Rear Mechanical brake component has restricted free movement | 1 |
| Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Offside Rear Rear position lamp|s| insecure |1.1.A.3a| | 1 |
| Offside Front Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Offside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front coil spring corroded so that its cross sectional area is reduced and seriously weakened |2.4.C.1b| | 1 |
| Offside Front coil spring corroded so that its cross sectional area is reduced and seriously weakened |2.4.C.1b| | 1 |
| Nearside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Exhaust emits excessive dense blue smoke during acceleration |7.3.A.2c| | 1 |
| Nearside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Brake pedal creeps down when held under pressure |3.3.B.1a| | 1 |
| Nearside Rear Body has a projection caused by damage |6.1.C.1| | 1 |
| Offside Rear Body has a projection caused by corrosion |6.1.C.1| | 1 |
| Nearside Rear Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement |2.4.B.2| | 1 |
| Offside Steering rack gaiter split |2.2.D.2d| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded front inner sill |5.2.6| | 1 |
| Offside Front Battery insecure |1.9.1| | 1 |
| Nearside Front Battery insecure |1.9.1| | 1 |
| Offside Front Lower Brake hose bulging under pressure |3.6.B.3| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Battery insecure and likely to fall from carrier both battery`s |4.13 |a| |ii|| | 1 |
| Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
| Offside Front Brake prescribed area is excessively corroded wheel arch next to brake flexy hose |1.1.21 |e| |i|| | 1 |
| Nearside Front Brake prescribed area is excessively corroded wheel arch next to the brake flexy |1.1.21 |e| |i|| | 1 |
| Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Trailer electrical socket |13 pin| not operating the trailer lamps as intended |1.9.4| | 1 |
| Nearside Direction indicator not working |1.4.A.2c| | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Obligatory mirror seriously deteriorated, affecting the rear view |8.1.2a| | 1 |
| Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Rear Brake pipe inadequately supported |3.6.B.1| | 1 |
| Offside Inner Front Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Front Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Nearside Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
| Offside Front Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Horn control missing |1.6.1| | 1 |
| All position lamps not in good working order |function impaired| |1.1.A.2a| | 1 |
| Offside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
| Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
| Windscreen washer control missing |8.2.1a| | 1 |
| Front Fuel hose leaking |7.2.3| | 1 |
| Nearside Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Nearside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f) | 1 |
| Inner Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f) | 1 |
| An item not tested (Manual) | 1 |
| Nearside Front suspension has a suspension lower ball joint securing nut not locked (2.5.B.1a) | 1 |
| Offside rear brake recording little or no effort (3.7.B.5a) | 1 |
| Direction indicators adversely affected by the operation of another lamp (1.4.A.2h) | 1 |
| Stop lamp adversely affected by the operation of another lamp (1.2.1f) | 1 |
| Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a) | 1 |
| Offside Front wheel bearing rough when rotated (2.5.A.2) | 1 |
| Exhaust emissions carbon monoxide content excessive (7.3.B.1a) | 1 |
| Offside Headlamp insecure (1.7.3) | 1 |
| Nearside Rear Direction indicator not working (1.4.A.2c) | 1 |
| Nearside Front Lower Front suspension retaining device ineffective (2.5.A.4) | 1 |
| Nearside Rear Brake operation has insufficient assistance for at least two more brake applications after the warning device has operated |3.3.D.3b| | 1 |
| Offside Rear Brake operation has insufficient assistance for at least two more brake applications after the warning device has operated |3.3.D.3b| | 1 |
| Nearside Front Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Headlamp insecure |1.7.3| | 1 |
| Indicator switch faulty |1.4.A.1| | 1 |
| Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Offside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Nearside Front Steering rack gaiter split |2.2.D.2d| | 1 |
| Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Nearside Front Upper Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Offside Front Lower Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Offside Rear Upper Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Offside Front Upper Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
| Offside Front Rear fog lamp tell tale not working |1.3.1b| | 1 |
| Nearside Front Headlamp not working on main beam |1.7.5a| | 1 |
| Nearside Front Headlamp insecure |1.7.3| | 1 |
| Offside Front Steering rack gaiter split |2.2.D.2d| | 1 |
| Offside Outer Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Front Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Front Driver`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
| Nearside Front Headlamp not in good working order |not working| |1.2.4a| | 1 |
| Driver`s door cannot be opened from inside the vehicle |6.2.B.1b| | 1 |
| Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
| Exhaust has a part missing |7.1.1a| | 1 |
| Nearside Front Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
| Nearside Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Steering system excessively rough |2.2.D.1| | 1 |
| Brake hose damaged | 1 |
| Nearside Front front brake recording little or no effort |3.7.B.5a| | 1 |
| Offside Front front brake recording little or no effort |3.7.B.5a| | 1 |
| Nearside Rear front parking brake recording little or no effort |3.7.B.6a| | 1 |
| Offside Front front brake binding |3.7.B.1| | 1 |
| Nearside Front front brake binding |3.7.B.1| | 1 |
| Offside Bonnet retaining device excessively deteriorated |8.4.2| | 1 |
| Nearside Front Driver`s seat insecure |6.2.A.1| | 1 |
| Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Horn not working (7.7 (a)) | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Offside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Nearside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b)) | 1 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Front brake application uneven | 1 |
| Rear brake application uneven | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Upper Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Exhaust emissions carbon monoxide content excessive |8.2.1.2 |b|| | 1 |
| Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Exhaust system insecure |6.1.2 |a|| | 1 |
| Offside Front Body panel corroded and likely to cause injury Door |6.2.1 |a| |i|| | 1 |
| Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 1 |
| Offside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Offside Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Rear fog lamp adversely affected by the operation of another lamp |1.3.2f| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Inner Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Headlamp insecure |4.1.1 |c|| | 1 |
| Headlamp not working on dipped beam both |4.1.1 |a| |ii|| | 1 |
| Nearside Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Nearside Headlamp aim not tested |4.1.2 |b|| | 1 |
| Battery insecure and likely to fall from carrier |4.13 |a| |ii|| | 1 |
| Position lamp switch insecure |4.2.2 |b|| | 1 |
| Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point |6.1.1 |c| |i|| | 1 |
| Nearside Front Integral body structure has excessive corrosion which adversely affects braking or steering cross member where stabiliser bar meets |6.1.1 |c| |ii|| | 1 |
| Offside Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
| Nearside Front Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced top of inner wheel arch |6.1.1 |c| |i|| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch near jacking point |6.1.1 |c| |i|| | 1 |
| Offside Front Side repeater insecure |1.4.A.2b| | 1 |
| Offside Front Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c| | 1 |
| All position lamps not working |1.1.A.3b| | 1 |
| Offside Side repeater incorrect colour |1.4.A.2f| | 1 |
| Nearside Headlamp aim not tested |1.8.A.1c| | 1 |
| Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Front position lamp|s| not working |1.1.A.3b| | 1 |
| Front Headlamp not in good working order |not working| |1.2.4a| | 1 |
| Offside Rear Rear wheel bearing rough when rotated |2.6.1| | 1 |
| Nearside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
| Nearside Front Front position lamp|s| obviously incorrectly positioned |1.1.A.3a| | 1 |
| Centre passenger door catch missing |6.2.B.2| | 1 |
| Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Rear Stop lamp not working |1.2.1b| | 1 |
| Nearside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Nearside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Hazard warning tell tale not working correctly |1.4.B.1e| | 1 |
| Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Brake hose has insufficient room to move | 1 |
| Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Position lamp not working Both Front |4.2.1 |a|| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Indicator switch inoperative Not Working |4.4.2 |a| |ii|| | 1 |
| All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch (6.1.1 (c) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember, both sides (5.3.6 (a) (i)) | 1 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i)) | 1 |
| Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
| Exhaust system insecure (6.1.2 (a)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis near door step (6.1.1 (c) (i)) | 1 |
| Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i)) | 1 |
| Rear Rear fog lamp tell tale not working |1.3.1b| | 1 |
| Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Obligatory mirror insecure |8.1.1| | 1 |
| Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Offside Front brake disc excessively pitted |3.5.1h| | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Brake vacuum build up too slow |3.3.E.6| | 1 |
| Offside Front Vehicle structure has a modification which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Front Upper Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |