>

MOT History from tests of petrol SYM MASKs year 2002

Review the list of common SYM MASK failures below or to perform a specific mot history check on your SYM then use our popular KnowYourCar service

mot history
Pass percent:79.44%
(The average a petrol SYM MASK year 2002 passes without issue)
Based on:214 MOT Tests
Most common failuresNo# failures
Rear Brake lever has inadequate reserve travel |3.1.3b|9
Exhaust is leaking and excessively noisey |7.1.1b|6
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|4
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Nearside Front Direction indicator damaged and function impaired |1.5.3a|2
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Front Roller brake test indicates a binding brake |3.3.A1a|2
Stop lamp remains on when the brake is released |1.3.1e|2
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Headlamp aim out of alignment2
Front Steering headbearing has excessive free play |2.2.2|2
Rear shock absorber has inadequate damping effect. |2.4.A.3b|2
Headlamp aim beam image kick up to the offside |1.6|1
Rear Exhaust is leaking and excessively noisey |7.1.1b|1
Rear Roller brake test indicates a binding brake |3.3.A1a|1
Rear Brake lever is damaged and the brake cannot be readily applied |3.1.3c|1
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b|1
Front Wheel bearing play so excessive that directional control is impaired |5.1.3 |a| |ii||1
Front Brake lever not releasing correctly and functionality of brakes affected |1.1.2 |b| |ii||1
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i||1
Rear reflector on motorcycle missing |1.4.1|1
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|1
Rear wheel insecure |4.2.3b|1
Front Floor brake test indicates a sticking brake |3.3.C2c|1
Front Stop lamp remains on when the brake is released |1.3.1e|1
Front wheel bearings are excessively rough |2.3.5b|1
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b|1
Fuel cap sealing washer missing |7.2.2c|1
Fuel cap does not fasten securely by a positive means |7.2.2b|1
Nearside Front Roller brake test indicates a binding brake |3.3.A1a|1
Stop lamp affected by the operation of another lamp |1.3.2|1
Rear Stop lamp remains on when the brake is released |1.3.1e|1
Rear Stop lamp affected by the operation of another lamp |1.3.2|1
Front Direction indicators affected by the operation of another lamp |1.5.1c|1
Rear Direction indicators affected by the operation of another lamp |1.5.1c|1
Front Horn not loud enough to be heard by another road user |1.7.3a|1
Throttle operating incorrectly |6.2.1f|1
Direction indicators affected by the operation of another lamp |1.5.1c|1
Rear Brake lever pivots excessively worn |3.1.3a|1
Rear Brake locking device insecure |3.2.A1e|1
Nearside Front Direction indicator insecure |1.5.3b|1
Nearside Rear Brake lever mounting insecure |3.1.2a|1
Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Headlamp insecure |1.2.3b|1
Headlamp aim headlamp deteriorated and function impaired |1.2.3a|1
Front Brake lever has inadequate reserve travel |3.1.3b|1
Exhaust mounting missing |7.1.1c|1
Exhaust excessively deteriorated |7.1.1a|1
Nearside Brake lever has inadequate reserve travel |3.1.3b|1
Rear Rear reflector on motorcycle missing |1.4.1|1
Nearside Rear Rear reflector on motorcycle missing |1.4.1|1
Registration plate issues1
Offside Front Direction indicator damaged and function impaired |1.5.3a|1
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Rear Exhaust excessively deteriorated |7.1.1a|1
Front Exhaust is leaking and excessively noisey |7.1.1b|1
Riders seat insecure |6.2.1a|1
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Rear suspension bush excessively deteriorated |2.4.A2a|i||1
Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy